blue screen death

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I currently need help with the blue screen of death. I was attempting to
reinstall windows XP pro when the blue screen error started. Now I can’t
cancel the reinstall so on every reboot XP just continues to try to reinstall
the new system and errors.
This pc had some bugs to begin with hence the reason for the reinstall. I
had turned the security software off to do this install, but only for 30
min.--- It’s my thought that this is where the problem started. Should
have uninstalled security. Anyway I need some guidance to stop the loop
The blue screen error is ***Stop:0x0000000c2
(0X00000007,0X00000CD4,0X00340045,0XE3CA11C)
Beginning dump of physical memory
Physical memory dump complete
This error happens about 10 min. during the Installing system part of the
upgrade .
Need a game plan - all ideas welcome. Would like get back to one of the
restore points but so far no luck.
 
Fred said:
I currently need help with the blue screen of death. I was attempting to
reinstall windows XP pro when the blue screen error started. Now I can’t
cancel the reinstall so on every reboot XP just continues to try to reinstall
the new system and errors.
This pc had some bugs to begin with hence the reason for the reinstall. I
had turned the security software off to do this install, but only for 30
min.--- It’s my thought that this is where the problem started. Should
have uninstalled security. Anyway I need some guidance to stop the loop
The blue screen error is ***Stop:0x0000000c2
(0X00000007,0X00000CD4,0X00340045,0XE3CA11C)
Beginning dump of physical memory
Physical memory dump complete
This error happens about 10 min. during the Installing system part of the
upgrade .
Need a game plan - all ideas welcome. Would like get back to one of the
restore points but so far no luck.
Click to expand...

If data has not been backed up, retrieve it with one of the methods
listed below. Then do a clean install of Windows.

http://michaelstevenstech.com/cleanxpinstall.html - Clean Install How-To
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows -
What you will need on-hand

Data retrieval:

1. Pull the drive and slave it in a computer running a working install
of XP. Depending on the target drive's characteristics, you may need a
drive adapter; i.e., laptop-to-IDE or a SATA controller card, etc. A
usb/firewire external drive enclosure works very well, too. Use the
working Windows Explorer to copy the data to the rescue system's hard
drive and then burn the data to cd or dvd.

2. Often XP will not boot with a slaved drive that has a damaged file
system. In that case, boot the target computer with either a Bart's PE
or a Linux live cd such as Knoppix and retrieve the data that way. Here
is general information on using Knoppix for this:

You will need a computer with two cd drives, one of which is a cd/dvd-rw
OR a usb thumb drive with enough capacity to hold your data OR an
external usb/firewire hard drive formatted FAT32 (not NTFS). To get
Knoppix, you need a computer with a fast Internet connection and
third-party burning software. Download the Knoppix .iso and create your
bootable cd. Then boot with it and it will be able to see the Windows
files. If you are using the usb thumb drive or the external hard drive,
right-click on its icon (on the Desktop) to get its properties and
uncheck the box that says "Read Only". Then click on it to open it. Note
that the default mouse action in the window manager used by Knoppix
(KDE) is a single click to open instead of the traditional MS Windows'
double-click (you can change this in Control Center). Otherwise, use the
K3b burning program to burn the files to cd/dvd-r's.

http://www.knoppix.net
http://www.nu2.nu/pebuilder/ - Bart's PE Builder


Malke
 
I currently need help with the blue screen of death. I was attempting to
reinstall windows XP pro when the blue screen error started. Now I can’t
cancel the reinstall so on every reboot XP just continues to try to reinstall
the new system and errors.
This pc had some bugs to begin with hence the reason for the reinstall. I
had turned the security software off to do this install, but only for 30
min.--- It’s my thought that this is where the problem started. Should
have uninstalled security. Anyway I need some guidance to stop the loop
The blue screen error is ***Stop:0x0000000c2
(0X00000007,0X00000CD4,0X00340045,0XE3CA11C)
Beginning dump of physical memory
Physical memory dump complete
This error happens about 10 min. during the Installing system part of the
upgrade .
Need a game plan - all ideas welcome. Would like get back to one of the
restore points but so far no luck.
Click to expand...

It's possible you have a bad memory chip.

Just happened to my brother with many BSOD's.
 
Back
Top