Blue Screen after latest Sec Patches

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

This months security patches blue screen my machine, I have to boot into safe
mode and remove them.

KB920872
KB920685
KB922582
KB919007

Looking at the memory dump CLASSPNP.SYS seams to be the culprit. I confirmed
that it was one of the sec patches by reinstalling them and getting the blue
screen once more. then removed them and everything is fine again.

I wish they would have QA'ed the patches properly.

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 14/09/2006
Time: 6:43:28 p.m.
User: N/A
Computer: EMPEROR
Description:
Error code 0000000a, parameter1 f8830478, parameter2 00000002, parameter3
00000001, parameter4 805001a6.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 30 0000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 66 38 eters f8
0030: 38 33 30 34 37 38 2c 20 830478,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 38 30 35 30 01, 8050
0050: 30 31 61 36 01a6

*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {f8830478, 2, 1, 805001a6}

*** ERROR: Module load completed but symbols could not be loaded for
nvraid.sys
*** ERROR: Module load completed but symbols could not be loaded for
nvatabus.sys
Probably caused by : CLASSPNP.SYS ( CLASSPNP!ClassCompleteRequest+11 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: f8830478, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 805001a6, address which referenced memory

Debugging Details:
------------------


OVERLAPPED_MODULE:

WRITE_ADDRESS: f8830478 Nonpaged pool expansion

CURRENT_IRQL: 2

FAULTING_IP:
nt!KiUnlinkThread+0
805001a6 095154 or [ecx+0x54],edx

DEFAULT_BUCKET_ID: DRIVER_FAULT

BUGCHECK_STR: 0xA

LAST_CONTROL_TRANSFER: from 80500214 to 805001a6

TRAP_FRAME: 80548b24 -- (.trap ffffffff80548b24)
ErrCode = 00000002
eax=80548bc4 ebx=ba3a1088 ecx=f8830424 edx=00000100 esi=f8830424 edi=00000000
eip=805001a6 esp=80548b98 ebp=80548ba8 iopl=0 nv up ei ng nz ac po nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010296
nt!KiUnlinkThread:
805001a6 095154 or [ecx+0x54],edx ds:0023:f8830478=????????
Resetting default scope

STACK_TEXT:
80548b94 80500214 ba3a1080 ba3a1088 00000100 nt!KiUnlinkThread
80548ba8 8050040b 00000000 80548bc4 00000000 nt!KiUnwaitThread+0x12
80548bd4 804f8c60 85cd4d3f 85cd4b40 00000000 nt!KiWaitTest+0xab
80548be8 f71ebed5 ba3a1080 00000000 00000000 nt!KeSetEvent+0x58
80548bfc 804f0362 86c99020 85cd4b40 ba3a1074
Ntfs!NtfsSingleSyncCompletionRoutine+0x16
80548c2c f74c7c70 80548c5c f74c7f54 86cec030 nt!IopfCompleteRequest+0xa2
80548c34 f74c7f54 86cec030 85cd4b40 00000001
CLASSPNP!ClassCompleteRequest+0x11
80548c5c 804f0362 00000000 85d9a6c0 85d9a858
CLASSPNP!TransferPktComplete+0x180
80548c8c f74c7c70 80548cb4 f72f2169 86d28db8 nt!IopfCompleteRequest+0xa2
80548c94 f72f2169 86d28db8 85d9a6c0 00000000
CLASSPNP!ClassCompleteRequest+0x11
WARNING: Stack unwind information not available. Following frames may be
wrong.
80548cb4 f72f35a3 86d28db8 85d9a6c0 f72fa15c nvraid+0x3169
80548cec f72f49e1 85cd0bc8 f72f3554 85cd0bc8 nvraid+0x45a3
80548d40 f72e7c6f 85da0b40 86d290e8 85df1488 nvraid+0x59e1
80548d58 f72e1d42 86d29564 85da0b40 00000000 nvatabus+0xfc6f
80548d8c f72e928f 00d290e8 00000001 00000000 nvatabus+0x9d42
80548db4 f72ea264 86d290e8 00000000 00000060 nvatabus+0x1128f
80548ddc f72ea7f8 00d7b438 00000001 00000000 nvatabus+0x12264
80548e2c 80540d5d 86d7b98c 86d7b438 00000000 nvatabus+0x127f8
80548e50 80540cd6 00000000 0000000e 00000000 nt!KiRetireDpcList+0x46


FOLLOWUP_IP:
CLASSPNP!ClassCompleteRequest+11
f74c7c70 5d pop ebp

SYMBOL_STACK_INDEX: 6

FOLLOWUP_NAME: MachineOwner

SYMBOL_NAME: CLASSPNP!ClassCompleteRequest+11

MODULE_NAME: CLASSPNP

IMAGE_NAME: CLASSPNP.SYS

DEBUG_FLR_IMAGE_TIMESTAMP: 41107ec2

STACK_COMMAND: .trap ffffffff80548b24 ; kb

FAILURE_BUCKET_ID: 0xA_W_CLASSPNP!ClassCompleteRequest+11

BUCKET_ID: 0xA_W_CLASSPNP!ClassCompleteRequest+11

Followup: MachineOwner
---------
 
Hey Redstorm

MS does test patches pretty heavily, and has a group
of non-MS "volunteers" that test them before release.
It is however, pretty hard (impossible?) to cover all of
the permutations of hardware, driver versions, etc. that
are out there.

You should apply the patches that do not carry the
culprit, and then check for updated BIOS and drivers
for your hardware (looks like the nvidia mobo chipset).
If you then still cannot install the patch, then call MS at
their PCSafety number, letting them know that you are
unable to apply that patch.
http://support.microsoft.com/?pr=SecurityHome

Redstorm said:
This months security patches blue screen my machine, I have to boot into
safe
mode and remove them.

KB920872
KB920685
KB922582
KB919007

Looking at the memory dump CLASSPNP.SYS seams to be the culprit. I
confirmed
that it was one of the sec patches by reinstalling them and getting the
blue
screen once more. then removed them and everything is fine again.

I wish they would have QA'ed the patches properly.

Event Type: Error
Event Source: System Error
Event Category: (102)
Event ID: 1003
Date: 14/09/2006
Time: 6:43:28 p.m.
User: N/A
Computer: EMPEROR
Description:
Error code 0000000a, parameter1 f8830478, parameter2 00000002, parameter3
00000001, parameter4 805001a6.

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 30 0000000
0020: 61 20 20 50 61 72 61 6d a Param
0028: 65 74 65 72 73 20 66 38 eters f8
0030: 38 33 30 34 37 38 2c 20 830478,
0038: 30 30 30 30 30 30 30 32 00000002
0040: 2c 20 30 30 30 30 30 30 , 000000
0048: 30 31 2c 20 38 30 35 30 01, 8050
0050: 30 31 61 36 01a6

*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {f8830478, 2, 1, 805001a6}

*** ERROR: Module load completed but symbols could not be loaded for
nvraid.sys
*** ERROR: Module load completed but symbols could not be loaded for
nvatabus.sys
Probably caused by : CLASSPNP.SYS ( CLASSPNP!ClassCompleteRequest+11 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
*
*
* Bugcheck Analysis
*
*
*
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address
at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: f8830478, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 805001a6, address which referenced memory

Debugging Details:
------------------


OVERLAPPED_MODULE:

WRITE_ADDRESS: f8830478 Nonpaged pool expansion

CURRENT_IRQL: 2

FAULTING_IP:
nt!KiUnlinkThread+0
805001a6 095154 or [ecx+0x54],edx

DEFAULT_BUCKET_ID: DRIVER_FAULT

BUGCHECK_STR: 0xA

LAST_CONTROL_TRANSFER: from 80500214 to 805001a6

TRAP_FRAME: 80548b24 -- (.trap ffffffff80548b24)
ErrCode = 00000002
eax=80548bc4 ebx=ba3a1088 ecx=f8830424 edx=00000100 esi=f8830424
edi=00000000
eip=805001a6 esp=80548b98 ebp=80548ba8 iopl=0 nv up ei ng nz ac po
nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000
efl=00010296
nt!KiUnlinkThread:
805001a6 095154 or [ecx+0x54],edx
ds:0023:f8830478=????????
Resetting default scope

STACK_TEXT:
80548b94 80500214 ba3a1080 ba3a1088 00000100 nt!KiUnlinkThread
80548ba8 8050040b 00000000 80548bc4 00000000 nt!KiUnwaitThread+0x12
80548bd4 804f8c60 85cd4d3f 85cd4b40 00000000 nt!KiWaitTest+0xab
80548be8 f71ebed5 ba3a1080 00000000 00000000 nt!KeSetEvent+0x58
80548bfc 804f0362 86c99020 85cd4b40 ba3a1074
Ntfs!NtfsSingleSyncCompletionRoutine+0x16
80548c2c f74c7c70 80548c5c f74c7f54 86cec030 nt!IopfCompleteRequest+0xa2
80548c34 f74c7f54 86cec030 85cd4b40 00000001
CLASSPNP!ClassCompleteRequest+0x11
80548c5c 804f0362 00000000 85d9a6c0 85d9a858
CLASSPNP!TransferPktComplete+0x180
80548c8c f74c7c70 80548cb4 f72f2169 86d28db8 nt!IopfCompleteRequest+0xa2
80548c94 f72f2169 86d28db8 85d9a6c0 00000000
CLASSPNP!ClassCompleteRequest+0x11
WARNING: Stack unwind information not available. Following frames may be
wrong.
80548cb4 f72f35a3 86d28db8 85d9a6c0 f72fa15c nvraid+0x3169
80548cec f72f49e1 85cd0bc8 f72f3554 85cd0bc8 nvraid+0x45a3
80548d40 f72e7c6f 85da0b40 86d290e8 85df1488 nvraid+0x59e1
80548d58 f72e1d42 86d29564 85da0b40 00000000 nvatabus+0xfc6f
80548d8c f72e928f 00d290e8 00000001 00000000 nvatabus+0x9d42
80548db4 f72ea264 86d290e8 00000000 00000060 nvatabus+0x1128f
80548ddc f72ea7f8 00d7b438 00000001 00000000 nvatabus+0x12264
80548e2c 80540d5d 86d7b98c 86d7b438 00000000 nvatabus+0x127f8
80548e50 80540cd6 00000000 0000000e 00000000 nt!KiRetireDpcList+0x46


FOLLOWUP_IP:
CLASSPNP!ClassCompleteRequest+11
f74c7c70 5d pop ebp

SYMBOL_STACK_INDEX: 6

FOLLOWUP_NAME: MachineOwner

SYMBOL_NAME: CLASSPNP!ClassCompleteRequest+11

MODULE_NAME: CLASSPNP

IMAGE_NAME: CLASSPNP.SYS

DEBUG_FLR_IMAGE_TIMESTAMP: 41107ec2

STACK_COMMAND: .trap ffffffff80548b24 ; kb

FAILURE_BUCKET_ID: 0xA_W_CLASSPNP!ClassCompleteRequest+11

BUCKET_ID: 0xA_W_CLASSPNP!ClassCompleteRequest+11

Followup: MachineOwner
Click to expand...
 
Roger Abell said:
Hey Redstorm

MS does test patches pretty heavily, and has a group
of non-MS "volunteers" that test them before release.
It is however, pretty hard (impossible?) to cover all of
the permutations of hardware, driver versions, etc. that
are out there.

You should apply the patches that do not carry the
culprit, and then check for updated BIOS and drivers
for your hardware (looks like the nvidia mobo chipset).
If you then still cannot install the patch, then call MS at
their PCSafety number, letting them know that you are
unable to apply that patch.
http://support.microsoft.com/?pr=SecurityHome
Click to expand...

.... and note that calls to Microsoft for security patch problems are free.
 
karl levinson said:
... and note that calls to Microsoft for security patch problems are free.
Click to expand...

Yes, and not just free, but they also trigger a straight-shot alert
to the MSRC parties responsible for the patch if it is a not yet
seen issue, and otherwise go into the impact rating counts used
to assess severity of problem with the patch.

Roger
 
Back
Top