Blind dailing with PCTEL 2304 WT V.92 MDC modem in w2k

  • Thread starter Thread starter Steven
  • Start date Start date
S

Steven

Modem works fine in NOT blind dailing mode under w2k.

However when ticking off the wait for dailtone before dailing

(under start>Control Panel>Phone and modems options>Modems>PCTEL 2304
WT V.92 MDC Properties>General)

and inserting x0 (blind dailing AT command see
http://support.ap.dell.com/docs/comm/r35323/en/at_and_s.htm)

in the Extra initialisation commands

(under start>Control Panel>Phone and modems options>Modems>PCTEL 2304
WT V.92 MDC Properties>Advanced)

a Windows Error 692: There was a hardware failure in modem (or other
connecting device) is seen.

Anybody intelligent out there who can shed some light on this? Any
suggestions are welcome

Steven



PS:The modem works fine in a hyperterminal blind dailing session i.e.
atx0dt1234
 
Modem works fine in NOT blind dailing mode under w2k.

However when ticking off the wait for dailtone before dailing
...
a Windows Error 692: There was a hardware failure in modem
....etc
Click to expand...

I would suggest posting your question to:
comp.dcom.modems

There are some very knowledgable people on that group.

GL
Geo
 
Back
Top