- Joined
- Aug 8, 2008
- Messages
- 1
- Reaction score
- 0
Below you can find Access Keys for BIOS setup for various computer systems :
Acer - Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos
ARI / ALR / AST (Advantage) - Press the Ctrl+Alt+Esc or Ctrl+Alt+Del keys.
Cybermax - Press the Esc key.
Tandon - Press the Ctrl+Shift+Esc keys.
Acer - Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos
- Press Del or F2 immediately after powering on.
- The BIOS on the Acer Altos 600 server uses the Ctrl+Alt+Esc key and the F1 key for advanced options.
- Older Acer computers may use also use the F1 or Ctrl+Alt+Esc keys to access BIOS.
- Press F10 while the cursor in the top right corner of the screen is blinking.
- Older Compaq computers may use the F1, F2, F10, or Del key to give access to BIOS.
- Press F2 when the Dell logo appears. Press every few seconds until the message Entering Setup appears.
- Older Dell desktops and laptops may instead use Ctrl+Alt+Enter or Del to enter BIOS.
- Older Dell laptops may use Fn+Esc or Fn+F1.
- Press Tab or Del while the eMachine logo displays on screen.
- Other eMachine computers may use F2 to enter BIOS.
- Press F2 once the Fujitsu logo appears.
- Press the F1 key repeatedly after restarting the computer.
- Some older Gateway computers use F2 to access the BIOS Setup utility.
- Press the F1 key after restarting the computer.
- HP Tablet PCs may use F10 or F12.
- Other HP computers may allow access to BIOS using the F2 or Esc keys.
- Press F1 immediately after powering on the computer.
- Older IBM computers (including some laptops) may utilize the F2 key for BIOS entry.
- Press F1 or F2 after powering on the computer.
- Older Lenovo products allow access to BIOS using Ctrl+Alt+F3, Ctrl+Alt+Ins, or Fn+F1.
- Press F1, F2 or Del immediately after powering on the PC.
- Press F2 to enter the BIOS Setup.
- Press F1, F2, or Del to enter BIOS.
- Press F2 after the computer starts.
- Some very old Sharp PCs require a Setup Diagnostics Disk to access BIOS.
- Press F2 or Del on startup.
- Press F1, F2 or F3 after turning on the computer.
- Press F1 or Esc after powering on to access BIOS.
ARI / ALR / AST (Advantage) - Press the Ctrl+Alt+Esc or Ctrl+Alt+Del keys.
Cybermax - Press the Esc key.
Tandon - Press the Ctrl+Shift+Esc keys.