M
MSNews
I have a windows 2000 workstation that has the above problem. Other than
turning off auto updates, is their a remedy?
Regards
CR
turning off auto updates, is their a remedy?
Regards
CR
J
Jim Byrd
Hi CR - The following procedure was developed on and for XP; however, both
parts should also work for Win2k. It was written for all levels of users:
How knowledgable about doing things are you? Do you know how to
start and stop services? How to run a .cmd file? If not, you'll need
access to someone who does to avoid problems. The following assumes you're
on Windows XP but will probably work OK for Win2k as well. If you're
confident about what you're doing, then try the
following first - only if it doesn't work, then there's another level of
stuff that can be done following:
1. Stop and Disable Automatic Updates, Background Intelligent Transfer
Service and the Cryptographic Service.
2. Rename the folder %SystemRoot%\SoftwareDistribution to
%SystemRoot%\OldSoftwareDistribution
3. Open Notepad and create a file containing the following:
REGSVR32 WUAPI.DLL
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL
Save this file as 'Wudll.cmd' (without the quotes) to any convenient
location then exit Notepad and double click on the file you just saved. You
should get a 'Sucess' mesage for each of the .dll's listed above.
4. Now Re-enable to Automatic status and then Start each of the services
you stopped before - Automatic Updates, Background Intelligent Transfer
Service and the Cryptographic Service.
5. Now Reboot. Now Reboot Again. (Yes, twice.)
See if that solves it - give it a couple of days. If so, then you can
delete 'OldSoftwareDistribution'. I would request that you post back with
your results. _Only if the problem does re-occur_, then do the following
_exactly_:
1. Go to http://wiki.djlizard.net/Dial-a-fix and download Dial-a-fix
v0.60.0.24 (2006-10-27)
2. Unzip it to a new folder at root with any name, e.g.
c:\Dial-a-fix-v0.60.0.24
3. Double click on Dial-a-fix.exe in that folder.
4. Click on the following:
Options/tooltips (just to get an idea of what it does in each section.
)
Both boxes under Prep
The 'all' (top) box for Sections 2, 3 and 4 (which will automatically
be set when you check 3)
In Section 5, 'Programming cores/runtimes' and
'Explorer/IE/OE/shell/WMP' only.
Click 'Go' . (Some of the re-registrations may take what seems like a
long time for some .dll's - Don't be impatient.)
5. Reboot (if Dial-a-fix doesn't do it automatically at the end). Now
Reboot Again. (Yes, twice.)
See if that does the trick, and, again please post back with your
experience.
MS is very aware of this issue. From a private communication:
"I regret to say that I was told that this known issue requires too much
change to be implemented in a hotfix. A change will instead be implemented
in the next Automatic Updates client, which we are planning to release in Q2
this year."
--
Regards, Jim Byrd,
My Blog, Defending Your Machine,
http://defendingyourmachine2.blogspot.com/
In MSNews <[email protected]> typed:
|| I have a windows 2000 workstation that has the above problem.
|| Other than turning off auto updates, is their a remedy?
||
|| Regards
|| CR
parts should also work for Win2k. It was written for all levels of users:
How knowledgable about doing things are you? Do you know how to
start and stop services? How to run a .cmd file? If not, you'll need
access to someone who does to avoid problems. The following assumes you're
on Windows XP but will probably work OK for Win2k as well. If you're
confident about what you're doing, then try the
following first - only if it doesn't work, then there's another level of
stuff that can be done following:
1. Stop and Disable Automatic Updates, Background Intelligent Transfer
Service and the Cryptographic Service.
2. Rename the folder %SystemRoot%\SoftwareDistribution to
%SystemRoot%\OldSoftwareDistribution
3. Open Notepad and create a file containing the following:
REGSVR32 WUAPI.DLL
REGSVR32 WUAUENG.DLL
REGSVR32 WUAUENG1.DLL
REGSVR32 ATL.DLL
REGSVR32 WUCLTUI.DLL
REGSVR32 WUPS.DLL
REGSVR32 WUPS2.DLL
REGSVR32 WUWEB.DLL
Save this file as 'Wudll.cmd' (without the quotes) to any convenient
location then exit Notepad and double click on the file you just saved. You
should get a 'Sucess' mesage for each of the .dll's listed above.
4. Now Re-enable to Automatic status and then Start each of the services
you stopped before - Automatic Updates, Background Intelligent Transfer
Service and the Cryptographic Service.
5. Now Reboot. Now Reboot Again. (Yes, twice.)
See if that solves it - give it a couple of days. If so, then you can
delete 'OldSoftwareDistribution'. I would request that you post back with
your results. _Only if the problem does re-occur_, then do the following
_exactly_:
1. Go to http://wiki.djlizard.net/Dial-a-fix and download Dial-a-fix
v0.60.0.24 (2006-10-27)
2. Unzip it to a new folder at root with any name, e.g.
c:\Dial-a-fix-v0.60.0.24
3. Double click on Dial-a-fix.exe in that folder.
4. Click on the following:
Options/tooltips (just to get an idea of what it does in each section.
)Both boxes under Prep
The 'all' (top) box for Sections 2, 3 and 4 (which will automatically
be set when you check 3)
In Section 5, 'Programming cores/runtimes' and
'Explorer/IE/OE/shell/WMP' only.
Click 'Go' . (Some of the re-registrations may take what seems like a
long time for some .dll's - Don't be impatient.)
5. Reboot (if Dial-a-fix doesn't do it automatically at the end). Now
Reboot Again. (Yes, twice.)
See if that does the trick, and, again please post back with your
experience.
MS is very aware of this issue. From a private communication:
"I regret to say that I was told that this known issue requires too much
change to be implemented in a hotfix. A change will instead be implemented
in the next Automatic Updates client, which we are planning to release in Q2
this year."
--
Regards, Jim Byrd,
My Blog, Defending Your Machine,
http://defendingyourmachine2.blogspot.com/
In MSNews <[email protected]> typed:
|| I have a windows 2000 workstation that has the above problem.
|| Other than turning off auto updates, is their a remedy?
||
|| Regards
|| CR