Automatic start of terminal server session after OS-boot

[John Leenders]

IS there a way the start a predefined session on the localmachine (W2k)
after this machine has rebooted (without user intervention)?

 

[Vera Noest [MVP]]

The easiest way is probably to configure both the client and the
server for autologon and put a preconfigured rdp file in \All Users
\Startup folder

260711 - How to Configure Automatic Logon to a Terminal Server
http://support.microsoft.com/?kbid=260711

_________________________________________________________
Vera Noest
MCSE,CCEA, Microsoft MVP - Terminal Server
http://hem.fyristorg.com/vera/IT
*----------- Please reply in newsgroup -------------*

 

[John Leenders]

Perhaps I should explain a little bit more...

The server is at a remote location, so management is done via Terminal
server in admin mode. The server needs to be running some GUI program
which doesn;t have a service option ie it must run in a user session.
Especially because it provides information which needs to be evaluated
(so running something like svrany/firedaemon etc is out, they provided
only local (console) access to the GUI). I don't want to install VNC
because this is less secure.
Currently when the machine reboots, i open a terminal session and start
the application. However when the reboot is unexpected (ie a power
outage) I' m not always aware of this fact, and the system (the GUI)
stays down....

So after reboot the server should open a terminal session to itself, in
which the program would be started. And then the server would
disconnect the session, leaving it running to be accessed from some
where else.

if you have any other ideas they are very welcome...!

Doesn't the autologon of the server open the possibility of a
'deadlock' ie the server keeps opening sessions?

thanks in advance

John

 

[Vera Noest [MVP]]

Is the server running W2K or 2003?

If it runs 2003, you could configure the server for autologon and
start the application on the console, through a shortcut in the
Autostart folder.
And then you could connect to it from your workstation with the
mstsc /console command.

_________________________________________________________
Vera Noest
MCSE,CCEA, Microsoft MVP - Terminal Server
http://hem.fyristorg.com/vera/IT
*----------- Please reply in newsgroup -------------*

 

[John Leenders]

Both one is running 2003 and one is running 2000