Automated scanning Doesn't operate despite its selection in tools/

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hi,

Does anyone know why Automated scanning doesn't scan despite its selection
in tools/options?

Thanks
 
Having the same problem. The only time it runs is after I get the message
that it hasn't run in 3 days and I tell it to run manually. It's set up to
run at 11:00 AM daily but never runs automatically.
 
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
 
The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for Windows
Defender in it.

Bob F

Steve Dodson said:
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Bob F. said:
Having the same problem. The only time it runs is after I get the message
that it hasn't run in 3 days and I tell it to run manually. It's set up
to
run at 11:00 AM daily but never runs automatically.
Click to expand...
Click to expand...
 
Reading other threads I found that Task Scheduler has 'Hidden' tasks.
Looking at them Windows defender is in there scheduled to run daily at the
specified time. Needless to say, it does not run.

I looked at the history log for Windows Defender and saw none indiciator of
any problems. The only entries were for my Outlook Spam detector and my
'Allow' and 'Succeeded'.

Steve Dodson said:
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Bob F. said:
Having the same problem. The only time it runs is after I get the message
that it hasn't run in 3 days and I tell it to run manually. It's set up
to
run at 11:00 AM daily but never runs automatically.
Click to expand...
Click to expand...
 
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and tell
it to run, what happens?

--

Bob F. said:
The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for Windows
Defender in it.

Bob F

Steve Dodson said:
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Bob F. said:
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM. Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and tell
it to run, what happens?

--

Bob F. said:
The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for Windows
Defender in it.

Bob F

Steve Dodson said:
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
There are several places where logs should show what really went on. In the
Scheduled Tasks folder, there's a log file which should show whether the
task started, and the duration--advanced, view log.

Additionally, and with better information, there's the system event log,
filtered for events with source "Windefend."

Right click My Computer, choose manage, click on the + in front of event
viewer, highlight the SYSTEM log, choose view, filter, and "WinDefend" in
the source drop-down control.

There should be events for start and end of each scheduled scan--and it will
have more detail than the scheduled tasks log has.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

Bob F. said:
The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Just for clarification--you won't see anything happen on a scheduled scan,
unless you open the Windows Defender UI while the scan is in progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the UI
to show the last scan date correctly.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

Bob F. said:
The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
I set Windows Defender to run Daily at 2:00PM. At 2:00PM I monitored both
the Scheduled Task window and Windows Defender Window. At 2:00PM Scheduled
Task showed the Windows Defender entry as 'running'. This lasted only a few
seconds. It then showed Last Run Time as 2:00 PM. At the same time I was
watching the Windows Defender window and there was no activity at all there.
After 2 minutes I manually initiated a Scan. This scan ran for 2:14 and
scanned 30553 objects.

Looking at the Scheduled Task Log there was a Windows Defender Start and
Stop entry:
"MP Scheduled Scan.job" (MpCmdRun.exe)
Started 5/16/2006 2:00:00 PM
"Cloudmark Desktop Config Guard.job" (snoe.exe)
Finished 5/16/2006 2:00:00 PM
Result: The task completed with an exit code of (0).
"MP Scheduled Scan.job" (MpCmdRun.exe)
Finished 5/16/2006 2:00:06 PM

The System Event Log shows for WinDefend shows:
Information 5/16/2006 2:04:42 PM WinDefend None 1001 N/A RX860
Information 5/16/2006 2:02:28 PM WinDefend None 1000 N/A RX860
(The only 2:00 PM timeframe entries)

After running the Scan manually the Windows Defender window shows Last Scan
Today at 2:02 PM

Bob F

Bill Sanderson MVP said:
There are several places where logs should show what really went on. In the
Scheduled Tasks folder, there's a log file which should show whether the
task started, and the duration--advanced, view log.

Additionally, and with better information, there's the system event log,
filtered for events with source "Windefend."

Right click My Computer, choose manage, click on the + in front of event
viewer, highlight the SYSTEM log, choose view, filter, and "WinDefend" in
the source drop-down control.

There should be events for start and end of each scheduled scan--and it will
have more detail than the scheduled tasks log has.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Looking at my previous update: Scheduled Tasks kicked off Windows Defender
task at 2:00 PM as it should have. Windows Defender never ran. At 2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds. The
Windows Defender window then indicated the completion of the scan that I
started.

Hopefully this (this reply and my previous reply) will help determine what
happened and lead to what is happening with the scheduled scan not occuring.

Bob F

Bill Sanderson MVP said:
Just for clarification--you won't see anything happen on a scheduled scan,
unless you open the Windows Defender UI while the scan is in progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the UI
to show the last scan date correctly.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Additional Information: I copied the Scheduled Task entry for Windows
Defender into a Windows "Run" window and it ran OK. I was also able to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe" Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for updated
definitions before running'. I re-sechuled it for a 4:00 PM run. We'll see
what happens then.

Bob F

Bob F. said:
Looking at my previous update: Scheduled Tasks kicked off Windows Defender
task at 2:00 PM as it should have. Windows Defender never ran. At 2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds. The
Windows Defender window then indicated the completion of the scan that I
started.

Hopefully this (this reply and my previous reply) will help determine what
happened and lead to what is happening with the scheduled scan not occuring.

Bob F

Bill Sanderson MVP said:
Just for clarification--you won't see anything happen on a scheduled scan,
unless you open the Windows Defender UI while the scan is in progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the UI
to show the last scan date correctly.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Scheduled Task kicked Windows Defender off at 4:00 PM but Windows Defender
never ran (as before). So it's not the 'check for updates' function. I did
check my Firewall (Microsoft OneCare Protection Plus) and Windows Defender
was defined and 'Allow'ed.

I'm at a loss. I'll wait for your response.

Bob F

Bob F. said:
Additional Information: I copied the Scheduled Task entry for Windows
Defender into a Windows "Run" window and it ran OK. I was also able to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe" Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for updated
definitions before running'. I re-sechuled it for a 4:00 PM run. We'll see
what happens then.

Bob F

Bob F. said:
Looking at my previous update: Scheduled Tasks kicked off Windows Defender
task at 2:00 PM as it should have. Windows Defender never ran. At 2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds. The
Windows Defender window then indicated the completion of the scan that I
started.

Hopefully this (this reply and my previous reply) will help determine what
happened and lead to what is happening with the scheduled scan not occuring.

Bob F

Bill Sanderson MVP said:
Just for clarification--you won't see anything happen on a scheduled scan,
unless you open the Windows Defender UI while the scan is in progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the UI
to show the last scan date correctly.

--

I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
One culpret that others have fingered is the switch syntax on the command
line, when the host OS is Windows 2000.

However- since you were able to run the unmodified command interactively and
get an effective scan, I think the most likely issue with the scheduled scan
is the credentials under which it is running.

On my system, if I make the hidden task visible, and right click it and
choose properties, looking at the Task tab, the Run as: is set to NT
AUTHORITY/SYSTEM

If yours does not read that way, try changing it. If it does, consider
setting that to an administrator level user with a password on your system,
and set the password for that user, using the set password button.

It is also possible that changing these credentials and then re-setting them
to NT AUTHORITY/SYSTEM may make a difference--there have been some other
posts in relation to credentials which suggest that it won't hurt to try
that, at any rate.


--

Bob F. said:
Scheduled Task kicked Windows Defender off at 4:00 PM but Windows Defender
never ran (as before). So it's not the 'check for updates' function. I
did
check my Firewall (Microsoft OneCare Protection Plus) and Windows Defender
was defined and 'Allow'ed.

I'm at a loss. I'll wait for your response.

Bob F

Bob F. said:
Additional Information: I copied the Scheduled Task entry for Windows
Defender into a Windows "Run" window and it ran OK. I was also able to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe" Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for
updated
definitions before running'. I re-sechuled it for a 4:00 PM run. We'll
see
what happens then.

Bob F

Bob F. said:
Looking at my previous update: Scheduled Tasks kicked off Windows
Defender
task at 2:00 PM as it should have. Windows Defender never ran. At
2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds.
The
Windows Defender window then indicated the completion of the scan that
I
started.

Hopefully this (this reply and my previous reply) will help determine
what
happened and lead to what is happening with the scheduled scan not
occuring.

Bob F

:

Just for clarification--you won't see anything happen on a scheduled
scan,
unless you open the Windows Defender UI while the scan is in
progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating
the UI
to show the last scan date correctly.

--

I found it in 'Hidden'. Did not scan though. I changed it to
1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler
says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and
I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus.
and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled
scan."

What build of Windows Defender are you on--top number in help,
about?

What's the scheduled time/date of that job? If you right-click it
and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest
Microsoft
updates. The Task Scheduler is started but there is no entry
for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the
task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and
confers no
rights.
Use of included script samples are subject to the terms
specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses
to
this
message are best directed to the newsgroup/thread from which
they
originated.
Having the same problem. The only time it runs is after I
get the
message
that it hasn't run in 3 days and I tell it to run manually.
It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite
its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Yes, it was set to NT AUTHORITY/SYSTEM. I changed it to my USER and set it
to 'Run Only if Logged On' and it ran OK. I tried changing it back to NT
AUTHORITY/SYSTEM and still had the same problem. Running fine now with my
USER specified.

I don't know if this is the same for the originator of this thread (Arno
D.S.). I jumped on this thread because I was having the same problem.

Bob F

Bill Sanderson MVP said:
One culpret that others have fingered is the switch syntax on the command
line, when the host OS is Windows 2000.

However- since you were able to run the unmodified command interactively and
get an effective scan, I think the most likely issue with the scheduled scan
is the credentials under which it is running.

On my system, if I make the hidden task visible, and right click it and
choose properties, looking at the Task tab, the Run as: is set to NT
AUTHORITY/SYSTEM

If yours does not read that way, try changing it. If it does, consider
setting that to an administrator level user with a password on your system,
and set the password for that user, using the set password button.

It is also possible that changing these credentials and then re-setting them
to NT AUTHORITY/SYSTEM may make a difference--there have been some other
posts in relation to credentials which suggest that it won't hurt to try
that, at any rate.


--

Bob F. said:
Scheduled Task kicked Windows Defender off at 4:00 PM but Windows Defender
never ran (as before). So it's not the 'check for updates' function. I
did
check my Firewall (Microsoft OneCare Protection Plus) and Windows Defender
was defined and 'Allow'ed.

I'm at a loss. I'll wait for your response.

Bob F

Bob F. said:
Additional Information: I copied the Scheduled Task entry for Windows
Defender into a Windows "Run" window and it ran OK. I was also able to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe" Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for
updated
definitions before running'. I re-sechuled it for a 4:00 PM run. We'll
see
what happens then.

Bob F

:

Looking at my previous update: Scheduled Tasks kicked off Windows
Defender
task at 2:00 PM as it should have. Windows Defender never ran. At
2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds.
The
Windows Defender window then indicated the completion of the scan that
I
started.

Hopefully this (this reply and my previous reply) will help determine
what
happened and lead to what is happening with the scheduled scan not
occuring.

Bob F

:

Just for clarification--you won't see anything happen on a scheduled
scan,
unless you open the Windows Defender UI while the scan is in
progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating
the UI
to show the last scan date correctly.

--

I found it in 'Hidden'. Did not scan though. I changed it to
1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler
says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and
I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus.
and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled
scan."

What build of Windows Defender are you on--top number in help,
about?

What's the scheduled time/date of that job? If you right-click it
and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest
Microsoft
updates. The Task Scheduler is started but there is no entry
for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the
task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and
confers no
rights.
Use of included script samples are subject to the terms
specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses
to
this
message are best directed to the newsgroup/thread from which
they
originated.
Having the same problem. The only time it runs is after I
get the
message
that it hasn't run in 3 days and I tell it to run manually.
It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite
its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
I used Windows Defender and set the time to where I wanted it. I'm back to
the same problem. Windows Defender put NT AUTHORITY\SYSTEM with a creator of
SYSTEM.

I can't leave it with my USER in it since Windows Defender keeps changing it
back when the time is changed.

Bob F

Bob F. said:
Yes, it was set to NT AUTHORITY/SYSTEM. I changed it to my USER and set it
to 'Run Only if Logged On' and it ran OK. I tried changing it back to NT
AUTHORITY/SYSTEM and still had the same problem. Running fine now with my
USER specified.

I don't know if this is the same for the originator of this thread (Arno
D.S.). I jumped on this thread because I was having the same problem.

Bob F

Bill Sanderson MVP said:
One culpret that others have fingered is the switch syntax on the command
line, when the host OS is Windows 2000.

However- since you were able to run the unmodified command interactively and
get an effective scan, I think the most likely issue with the scheduled scan
is the credentials under which it is running.

On my system, if I make the hidden task visible, and right click it and
choose properties, looking at the Task tab, the Run as: is set to NT
AUTHORITY/SYSTEM

If yours does not read that way, try changing it. If it does, consider
setting that to an administrator level user with a password on your system,
and set the password for that user, using the set password button.

It is also possible that changing these credentials and then re-setting them
to NT AUTHORITY/SYSTEM may make a difference--there have been some other
posts in relation to credentials which suggest that it won't hurt to try
that, at any rate.


--

Bob F. said:
Scheduled Task kicked Windows Defender off at 4:00 PM but Windows Defender
never ran (as before). So it's not the 'check for updates' function. I
did
check my Firewall (Microsoft OneCare Protection Plus) and Windows Defender
was defined and 'Allow'ed.

I'm at a loss. I'll wait for your response.

Bob F

:

Additional Information: I copied the Scheduled Task entry for Windows
Defender into a Windows "Run" window and it ran OK. I was also able to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe" Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for
updated
definitions before running'. I re-sechuled it for a 4:00 PM run. We'll
see
what happens then.

Bob F

:

Looking at my previous update: Scheduled Tasks kicked off Windows
Defender
task at 2:00 PM as it should have. Windows Defender never ran. At
2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14 seconds.
The
Windows Defender window then indicated the completion of the scan that
I
started.

Hopefully this (this reply and my previous reply) will help determine
what
happened and lead to what is happening with the scheduled scan not
occuring.

Bob F

:

Just for clarification--you won't see anything happen on a scheduled
scan,
unless you open the Windows Defender UI while the scan is in
progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating
the UI
to show the last scan date correctly.

--

I found it in 'Hidden'. Did not scan though. I changed it to
1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler
says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and
I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus.
and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled
scan."

What build of Windows Defender are you on--top number in help,
about?

What's the scheduled time/date of that job? If you right-click it
and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest
Microsoft
updates. The Task Scheduler is started but there is no entry
for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the
task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and
confers no
rights.
Use of included script samples are subject to the terms
specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses
to
this
message are best directed to the newsgroup/thread from which
they
originated.
Having the same problem. The only time it runs is after I
get the
message
that it hasn't run in 3 days and I tell it to run manually.
It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite
its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Well--as a workaround, you can pull it out from under Windows Defender and
just schedule that command yourself with the parameters you choose, and tell
Defender not to schedule it at all. That should work, and allows you some
flexibility--but requires effort.

--

Bob F. said:
I used Windows Defender and set the time to where I wanted it. I'm back to
the same problem. Windows Defender put NT AUTHORITY\SYSTEM with a creator
of
SYSTEM.

I can't leave it with my USER in it since Windows Defender keeps changing
it
back when the time is changed.

Bob F

Bob F. said:
Yes, it was set to NT AUTHORITY/SYSTEM. I changed it to my USER and set
it
to 'Run Only if Logged On' and it ran OK. I tried changing it back to NT
AUTHORITY/SYSTEM and still had the same problem. Running fine now with
my
USER specified.

I don't know if this is the same for the originator of this thread (Arno
D.S.). I jumped on this thread because I was having the same problem.

Bob F

Bill Sanderson MVP said:
One culpret that others have fingered is the switch syntax on the
command
line, when the host OS is Windows 2000.

However- since you were able to run the unmodified command
interactively and
get an effective scan, I think the most likely issue with the scheduled
scan
is the credentials under which it is running.

On my system, if I make the hidden task visible, and right click it and
choose properties, looking at the Task tab, the Run as: is set to NT
AUTHORITY/SYSTEM

If yours does not read that way, try changing it. If it does, consider
setting that to an administrator level user with a password on your
system,
and set the password for that user, using the set password button.

It is also possible that changing these credentials and then re-setting
them
to NT AUTHORITY/SYSTEM may make a difference--there have been some
other
posts in relation to credentials which suggest that it won't hurt to
try
that, at any rate.


--

Scheduled Task kicked Windows Defender off at 4:00 PM but Windows
Defender
never ran (as before). So it's not the 'check for updates' function.
I
did
check my Firewall (Microsoft OneCare Protection Plus) and Windows
Defender
was defined and 'Allow'ed.

I'm at a loss. I'll wait for your response.

Bob F

:

Additional Information: I copied the Scheduled Task entry for
Windows
Defender into a Windows "Run" window and it ran OK. I was also able
to
monitor it running in the Windows Defender window.

The run command was:
"C:\Program Files\Windows Defender\MpCmdRun.exe"
Scan -RestrictPrivileges

The only change that I made this time was to unselect the 'Check for
updated
definitions before running'. I re-sechuled it for a 4:00 PM run.
We'll
see
what happens then.

Bob F

:

Looking at my previous update: Scheduled Tasks kicked off Windows
Defender
task at 2:00 PM as it should have. Windows Defender never ran.
At
2:02 PM
I started a Windows Defender Scan that lasted 2 minutes and 14
seconds.
The
Windows Defender window then indicated the completion of the scan
that
I
started.

Hopefully this (this reply and my previous reply) will help
determine
what
happened and lead to what is happening with the scheduled scan not
occuring.

Bob F

:

Just for clarification--you won't see anything happen on a
scheduled
scan,
unless you open the Windows Defender UI while the scan is in
progress, and
let it stay open for a bit, so it can connect to the process
that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not
happening, or
whether it might be happening, but that there is a problem
updating
the UI
to show the last scan date correctly.

--

I found it in 'Hidden'. Did not scan though. I changed it to
1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task
Scheduler
says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it
and
I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top
menus.
and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP
Scheduled
scan."

What build of Windows Defender are you on--top number in
help,
about?

What's the scheduled time/date of that job? If you
right-click it
and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the
latest
Microsoft
updates. The Task Scheduler is started but there is no
entry
for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is
the
task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and
confers no
rights.
Use of included script samples are subject to the terms
specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all
responses
to
this
message are best directed to the newsgroup/thread from
which
they
originated.
message
Having the same problem. The only time it runs is after
I
get the
message
that it hasn't run in 3 days and I tell it to run
manually.
It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan
despite
its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Well, my computer is on Win 2000

Steve Dodson said:
I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this
message are best directed to the newsgroup/thread from which they
originated.
Bob F. said:
Having the same problem. The only time it runs is after I get the message
that it hasn't run in 3 days and I tell it to run manually. It's set up
to
run at 11:00 AM daily but never runs automatically.
Click to expand...
Click to expand...
 
Just a question. does defender post the date and time of its automated scans
on the bottom of the main menu?

Thanks

Bill Sanderson MVP said:
Just for clarification--you won't see anything happen on a scheduled scan,
unless you open the Windows Defender UI while the scan is in progress, and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the UI
to show the last scan date correctly.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

Bill Sanderson MVP said:
In the task scheduler window, go to Advanced, in the top menus. and check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
It should--here's how mine reads:
Status
Last Scan: Today at 9:00 AM (Quick scan).
Scan schedule Daily at 9:00 AM.
Real-time protection:` On
Definition version 1.14.1452.3 created on 5/8/2006 at 1:27
PM.

--

Arno D. S. said:
Just a question. does defender post the date and time of its automated
scans
on the bottom of the main menu?

Thanks

Bill Sanderson MVP said:
Just for clarification--you won't see anything happen on a scheduled
scan,
unless you open the Windows Defender UI while the scan is in progress,
and
let it stay open for a bit, so it can connect to the process that is
actually doing the scan and display the progress.

So--it isn't clear to me whether the scan is really not happening, or
whether it might be happening, but that there is a problem updating the
UI
to show the last scan date correctly.

--

Bob F. said:
I found it in 'Hidden'. Did not scan though. I changed it to 1:00PM.
Still
didn't scan. Task Scheduler indicated the change. Task Scheduler says
it
ran
at 1:00PM but Windows Defender 'Last Scan' doesn't indicate it and I
saw
nothing happen at 1:00PM.

Windows Defender build is:
Windows Defender Version: 1.1.1347.0
Engine Version: 1.1.1372.0
Definition Version: 1.14.1452.3

Bob F

:

In the task scheduler window, go to Advanced, in the top menus. and
check
"View hidden tasks."

You should then see a job for the Defender scan. "MP Scheduled scan."

What build of Windows Defender are you on--top number in help, about?

What's the scheduled time/date of that job? If you right-click it and
tell
it to run, what happens?

--

The OS is Windows XP Professional SP2 running all the latest
Microsoft
updates. The Task Scheduler is started but there is no entry for
Windows
Defender in it.

Bob F

:

I need more information here - What OS are you running? Is the task
scheduler service started?

--
-steve

Steve Dodson [MSFT]
Windows Defender Beta Lead
MCSE, CISSP
http://blogs.technet.com/stevedod
--

This posting is provided "AS IS" with no warranties, and confers no
rights.
Use of included script samples are subject to the terms specified
at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to
this
message are best directed to the newsgroup/thread from which they
originated.
Having the same problem. The only time it runs is after I get
the
message
that it hasn't run in 3 days and I tell it to run manually. It's
set
up
to
run at 11:00 AM daily but never runs automatically.

:


Hi,

Does anyone know why Automated scanning doesn't scan despite its
selection
in tools/options?

Thanks
Click to expand...
Click to expand...
Click to expand...
 
Back
Top