C
Chris Guimbellot
Hello,
A long time ago, I posted a question about an audio driver that I have not
working when I install Win2k. The original question and response are here:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=uG1q6AHR
CHA.2512%40tkmsftngp11&rnum=4&prev=/groups%3Fq%3Daudio%2Bguimbellot%26ie%3DU
TF-8%26oe%3DUTF-8%26hl%3Den
Basically, David told me to run Windows Update for the new driver (thanks
David). Anyway, under that scenario, I had installed Win2K from the disk,
hence no service packs. The problem now is that when I installed Win2K, I
slipstreamed SP4 into the distribution share. When I run use the update
driver wizard and search windows update, it tells me I already have the
correct driver installed.
In Device Manager, the device is listed as AC'97 Driver for Intel(r) 82801AA
Controller.
When I went to Intel's site, it told me to look at the numbers on the
motherboard itself. The problem with that is that there are no numbers on
the board that remotely coincide with the format Intel gives in their
examples. I think the reason is because the board is not an Intel board but
an OEM and it just uses Intel chips.
It also told me to look at the system BIOS, but when I ran setup upon
booting, there was no place to even get that info.
The PC is a Compaq Deskpro EX P1.0GHz. When I went to Compaq's site, there
were no Intel audio drivers for my model PC, just drivers for ADI and
Creative Labs.
I have exhausted everything I can think of. Any ideas would be most
appreciated. Thanks,
Chris
A long time ago, I posted a question about an audio driver that I have not
working when I install Win2k. The original question and response are here:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&threadm=uG1q6AHR
CHA.2512%40tkmsftngp11&rnum=4&prev=/groups%3Fq%3Daudio%2Bguimbellot%26ie%3DU
TF-8%26oe%3DUTF-8%26hl%3Den
Basically, David told me to run Windows Update for the new driver (thanks
David). Anyway, under that scenario, I had installed Win2K from the disk,
hence no service packs. The problem now is that when I installed Win2K, I
slipstreamed SP4 into the distribution share. When I run use the update
driver wizard and search windows update, it tells me I already have the
correct driver installed.
In Device Manager, the device is listed as AC'97 Driver for Intel(r) 82801AA
Controller.
When I went to Intel's site, it told me to look at the numbers on the
motherboard itself. The problem with that is that there are no numbers on
the board that remotely coincide with the format Intel gives in their
examples. I think the reason is because the board is not an Intel board but
an OEM and it just uses Intel chips.
It also told me to look at the system BIOS, but when I ran setup upon
booting, there was no place to even get that info.
The PC is a Compaq Deskpro EX P1.0GHz. When I went to Compaq's site, there
were no Intel audio drivers for my model PC, just drivers for ADI and
Creative Labs.
I have exhausted everything I can think of. Any ideas would be most
appreciated. Thanks,
Chris