ati dvd files 720x960

  • Thread starter Thread starter randy
  • Start date Start date
R

randy

I've done a clean install of Xp and ati software

6-8_xcode_35179, and atiCDwiz

6-11_xp-2k_dd_ccc_wmd_en_37616

9-14_mmc_uci

9-15_mmc_enu

All my DVD captures are still 720x960

HELP !!!
 
The expected resolution is 720x480, so it looks like the horizontal
resolution is being doubled. Sounds like a problem with deinterlacing,
progressive scan, etc.

By "DVD capture", do you mean getting an s-video or component feed from an
external DVD player? Or trying to encode a captured TV show onto DVD?
 
I click record, or a schedule a recording

and the captured TV show is 720x960.

Tuner or composite in.

The clean install fixed VCD, it was 352 x 480.


Randy
 
randy said:
I click record, or a schedule a recording

and the captured TV show is 720x960.

Tuner or composite in.

The clean install fixed VCD, it was 352 x 480.


Randy
Click to expand...
This is a problem with 9.1?. Don't know if 9.16 cured it.
 
Can't install 9.16

Unable to start TV
"check the windows device manger to ensure that the correct video
drivers has been installed and working properly before attempting to
restart TV."

Randy
 
randy said:
Can't install 9.16

Unable to start TV
"check the windows device manger to ensure that the correct video
drivers has been installed and working properly before attempting to
restart TV."

Randy
Click to expand...
 
randy said:
Can't install 9.16

Unable to start TV
"check the windows device manger to ensure that the correct video
drivers has been installed and working properly before attempting to
restart TV."

Randy
Click to expand...
 
randy said:
Can't install 9.16

Unable to start TV
"check the windows device manger to ensure that the correct video
drivers has been installed and working properly before attempting to
restart TV."

Randy
Click to expand...
 
randy said:
Can't install 9.16

Unable to start TV
"check the windows device manger to ensure that the correct video
drivers has been installed and working properly before attempting to
restart TV."

Randy
Click to expand...
I posted info on the order of installation within the last week. You may
need to use the info on ati.com/install to clean out the old installation
first though.
If all you have is an AIW and your card doesn't need newer drivers MMC 9.08
or 9.06 may be a better choice anyway.
 
T.

I am fdisking & formating my drive,

clean install of XP pro SP2 and downloading 57 +/- updates.

For the 1st time the 8.7 cd gave me an error, starting to think

one of the updates is at fault.

Will try the updates after the ati install.

Thank for the input.

randy
 
randy said:
T.

I am fdisking & formating my drive,

clean install of XP pro SP2 and downloading 57 +/- updates.

For the 1st time the 8.7 cd gave me an error, starting to think

one of the updates is at fault.

Will try the updates after the ati install.

Thank for the input.

randy
Click to expand...
Never had a problem the methods at ati.com/install didn't clean up. The 2
times I reinstalled XP, it didn't help. Of course it is possible your XP
install actually has a problem, but doubt it.
 
ok, so this topic is probably dead, but who cares.

I have this problem with my 9600 as well. Here's what i did to
capture full resolution (720X480)

First, make a preset, and keep it at 720X480 resolution (which
captures at 720X960). Get everything else perfect, just how you want
it.

Go into the registry, REGEDIT in RUN

Go to this key:

HKEY_CURRENT_USER\Software\ATI
Technologies\MultiMedia\Features\DTV\Record\Transcode\MPEG\{XXX}

Find the key for Video Height, and change it to 240 from 480.

Then, re-open TV, and check to make sure it shows in the capture
profiles that it records at 720X240.

The final file will be the correctly sized at 720X480.

Hope this helps.
 
Thanks NaeSLaS if it happens again I'll try it.

After 15 days ATI answered and it worked !!!


I would recommend installing Catalyst 6.2 and Multimedia Center
9.06.1. Installation instructions can be found at www.ati.com/install,
please follow the instructions to fully remove all AMD software for
ATI products before installing the updated software. If you have a
Remote Wonder, make sure the Remote Wonder is unplugged from the USB
port on the computer before you uninstall, and not plugged back in
until you have rebooted after installing the RW drivers at the end.

Catalyst 6.2 can be found in KB article 737-21599

MMC 9.06.1 can be found In KB article 737-18934

If you are using Gemstar Guide Plus it needs to be installed from the
original CD, it is not part of the software you download from AMD. It
can be found in the Install\Gemstar directory on the Catalyst CD. As
long as you install the Gemstar software before you install the last
of the MMC downloads from the above MMC software it will show up in
the AMD Launchpad.

If you need the Remote Wonder software RW 3.02 can be found at the
link below

http://ati.amd.com/support/drivers/xp/previous/remote/remotewonder2-30200-xp.html

The software is installed in the order it is listed. If you have a
Radeon based video card, install the Catalyst drivers first, then the
Multimedia Center software in the order it is listed on the webpage
then the Remote Wonder software.

To find the specific KB articles;

1. Click on the "Customer Care" bar (second link from the left across
the top of the ATI website).

2. In the upper left hand corner, click on the "Advanced Search" link.

3. Under "Search Type:" select "by ID:737"

4. Type in the number [relevant KB Article number] and press the
"Enter" button on your keyboard


Thanks ATI Support and all who posted here.


2nd time a charm?
 
Back
Top