ATA33 MB and harddrives

  • Thread starter Thread starter Don
  • Start date Start date
my MOBO has the ATA33 IDE chanels .. and Im getting a Maxtor that
says "System Requirements ATA 66/100/133 Bus "

would that work ???

well I dont care for the new HD would work slow ~33MB/s ..
my OS main HD's is using SCSI .. and this would only be used as
storage ;)

and no I dont have a free PCI slot. :(


http://www.futureshop.ca/catalog/pr...&sku_id=0665000FS10021925&catid=&newdeptid=18


what do you guys think ?


thax
Don
Click to expand...
How big a drive? It should work at ATA33 speeds, but might be bigger
than your BIOS can handle. Most ATA33 systems had a limit of 32gb, the
rest topped out at 127gb.
 
Don't know, but if the Maxtor does not work with ATA33 it will default to PIO, which will make ATA33 look fast.
 
Mike .. why do you say it would fall back to PIO mode ?!
shouldn't fall to ATA33 ?!!! is this a Maxtor thing ?

thanks
 
Mike .. why do you say it would fall back to PIO mode ?!
shouldn't fall to ATA33 ?!!! is this a Maxtor thing ?

thanks
Click to expand...

It won't fall down into PIO mode.. like all modern drives, it can
scale back to ATA33 fine, there are no unique Maxtor-issues in this
regard. The only real issue since you don't mind ATA33, is whether
the motherboard BIOS supports the drive capacity.


Dave
 
It might run at ATA33 as you say, even though Maxtor does not say so. If DMA does not work, e.g. in DOS or Win95, (or sometimes with any other OS) it will run in PIO mode. If you use a Promise PCI card (which emulates SCSI) it will always run with DMA.
 
Back
Top