At times, no browsing

  • Thread starter Thread starter ms
  • Start date Start date
M

ms

Normally my W2000/SP4 custom desktop runs fine. It was built with SP4
installed 3 years ago, no patches since then, daily browsing (DUN) with
Firefox and Xnews newsreader since then, never *had* problems until about
6 weeks ago.

I don't use MS software except for the OS, no commercial software,
usually small noinstall freeware utilities, has always been very
troublefree.

6 weeks ago, on daily cold boot, worked fine one day, installed nothing,
don't use registry cleaners, etc.

The next day, DUN was normal, Firefox opened normally, but it was not
browsing. I disabled the firewall, no help, I checked seveal things,
everything seemed normal. I changed nothing. I went to another XP
machine, works fine on same DUN connection. I ran several AV programs,
clean results.

The next day, browsing was normal. Normal for the next few weeks, one
day, I sent an email, 5 minutes later it stopped browsing.

I went back to a month-old registry, it started browsing again.

Today it is again not browsing. I'm writing this in another computer.

I have the rollup patch of about a year ago, waiting to install it after
I backup everything.

I just read an earlier post here that says W2K is very vulnerable, will
get infected in minutes unless patched, that is not my experience, SP4
helps with some issues, I'm sure. Careful browsing makes a lot of
difference also.

The way my machine normally works, there is nothing basic wrong, it
worked years OK.

Is there a missing patch that would account for this strange situation,
or what?

ms
 
When Firefox stops browsing can IE still browse? Is there anything
logged in the Event Log when this happens? Is the DHCP Client service
running?

John
 
ms said:
Normally my W2000/SP4 custom desktop runs fine. It was built with SP4
installed 3 years ago, no patches since then, daily browsing (DUN) with
Firefox and Xnews newsreader since then, never *had* problems until about
6 weeks ago.

I don't use MS software except for the OS, no commercial software,
usually small noinstall freeware utilities, has always been very
troublefree.

6 weeks ago, on daily cold boot, worked fine one day, installed nothing,
don't use registry cleaners, etc.

The next day, DUN was normal, Firefox opened normally, but it was not
browsing. I disabled the firewall, no help, I checked seveal things,
everything seemed normal. I changed nothing. I went to another XP
machine, works fine on same DUN connection. I ran several AV programs,
clean results.

The next day, browsing was normal. Normal for the next few weeks, one
day, I sent an email, 5 minutes later it stopped browsing.

I went back to a month-old registry, it started browsing again.

Today it is again not browsing. I'm writing this in another computer.

I have the rollup patch of about a year ago, waiting to install it after
I backup everything.

I just read an earlier post here that says W2K is very vulnerable, will
get infected in minutes unless patched, that is not my experience, SP4
helps with some issues, I'm sure. Careful browsing makes a lot of
difference also.

The way my machine normally works, there is nothing basic wrong, it
worked years OK.

Is there a missing patch that would account for this strange situation,
or what?

ms
Click to expand...


At the command prompt try ipconfig /release

also ipconfig /? to see other options
 
Also from a command prompt;

ipconfig /all

both before and after may reveal something.



--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect
 
When Firefox stops browsing can IE still browse? Is there anything
logged in the Event Log when this happens? Is the DHCP Client service
running?

John
Click to expand...
Thanks.

I will try to respond one step at a time, and your post was first.

I tried browsing with Firefox, no luck, closed it.

I then ran IE, pasted in a link (I have no favorites setup in IE), it
could not browse, closed it.

I looked in Windows Task Manager, do not see DHCP Client service
as a running process.
Is there anything
logged in the Event Log when this happens?
Click to expand...

In Search, I don't come up with Event Log, how to normally enable it?

I have a utility Event Log Analyzer, under System, it shows this:
(sorry for the long post, was unsure what to delete)

Type Date Time Event Source Category Domain\User Computer

Information 10/10/2008 4:02:43 PM 20158 RemoteAccess None N/A
P2
Information 10/10/2008 3:41:50 PM 134 Removable Storage Service
None N/A P2
Information 10/10/2008 4:59:43 AM 20159 RemoteAccess None N/A
P2
Information 10/10/2008 4:59:20 AM 20158 RemoteAccess None N/A
P2
Information 10/10/2008 4:51:45 AM 26 Application Popup None N/A
P2
Information 10/10/2008 4:51:07 AM 17 avgntdd None N/A P2
Error 10/10/2008 4:51:21 AM 7026 Service Control Manager None N/A
P2
Error 10/10/2008 4:51:20 AM 7001 Service Control Manager None N/A
P2
Error 10/10/2008 4:51:20 AM 7000 Service Control Manager None N/A
P2
Error 10/10/2008 4:51:19 AM 7000 Service Control Manager None N/A
P2
Error 10/10/2008 4:51:18 AM 7000 Service Control Manager None N/A
P2
Information 10/10/2008 4:51:17 AM 6005 EventLog None N/A P2
Information 10/10/2008 4:51:17 AM 6009 EventLog None N/A P2
Information 10/9/2008 5:03:37 PM 6006 EventLog None N/A P2
Information 10/9/2008 4:12:14 PM 135 Removable Storage Service
None N/A P2
Information 10/9/2008 4:12:13 PM 160 Removable Storage Service
None N/A P2
Information 10/9/2008 4:10:31 PM 134 Removable Storage Service
None N/A P2
Information 10/9/2008 12:13:37 PM 135 Removable Storage Service
None N/A P2
Information 10/9/2008 12:13:36 PM 160 Removable Storage Service
None N/A P2
Information 10/9/2008 12:09:50 PM 134 Removable Storage Service
None N/A P2
Information 10/9/2008 11:47:30 AM 20159 RemoteAccess None N/A
P2
Information 10/9/2008 11:47:03 AM 20158 RemoteAccess None N/A
P2
Information 10/9/2008 11:36:24 AM 26 Application Popup None N/A
P2
Information 10/9/2008 11:32:48 AM 17 avgntdd None N/A P2
Error 10/9/2008 11:33:02 AM 7026 Service Control Manager None N/A
P2
Error 10/9/2008 11:33:01 AM 7001 Service Control Manager None N/A
P2
Error 10/9/2008 11:33:01 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 11:33:00 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 11:32:59 AM 7000 Service Control Manager None N/A
P2
Information 10/9/2008 11:32:58 AM 6005 EventLog None N/A P2
Information 10/9/2008 11:32:58 AM 6009 EventLog None N/A P2
Information 10/9/2008 6:42:47 AM 6006 EventLog None N/A P2
Information 10/9/2008 6:03:16 AM 20159 RemoteAccess None N/A
P2
Information 10/9/2008 6:03:01 AM 20158 RemoteAccess None N/A
P2
Information 10/9/2008 5:57:46 AM 20159 RemoteAccess None N/A
P2
Information 10/9/2008 5:57:21 AM 20158 RemoteAccess None N/A
P2
Information 10/9/2008 5:56:22 AM 26 Application Popup None N/A
P2
Information 10/9/2008 5:55:48 AM 17 avgntdd None N/A P2
Error 10/9/2008 5:56:01 AM 7026 Service Control Manager None N/A
P2
Error 10/9/2008 5:56:00 AM 7001 Service Control Manager None N/A
P2
Error 10/9/2008 5:56:00 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 5:55:59 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 5:55:59 AM 7000 Service Control Manager None N/A
P2
Information 10/9/2008 5:55:58 AM 6005 EventLog None N/A P2
Information 10/9/2008 5:55:58 AM 6009 EventLog None N/A P2
Information 10/9/2008 5:54:46 AM 6006 EventLog None N/A P2
Information 10/9/2008 5:41:39 AM 20159 RemoteAccess None N/A
P2
Information 10/9/2008 5:40:09 AM 20158 RemoteAccess None N/A
P2
Information 10/9/2008 5:36:58 AM 26 Application Popup None N/A
P2
Information 10/9/2008 5:26:12 AM 17 avgntdd None N/A P2
Error 10/9/2008 5:26:26 AM 7026 Service Control Manager None N/A
P2
Error 10/9/2008 5:26:25 AM 7001 Service Control Manager None N/A
P2
Error 10/9/2008 5:26:25 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 5:26:24 AM 7000 Service Control Manager None N/A
P2
Error 10/9/2008 5:26:23 AM 7000 Service Control Manager None N/A
P2
Information 10/9/2008 5:26:22 AM 6005 EventLog None N/A P2
Information 10/9/2008 5:26:22 AM 6009 EventLog None N/A P2
Information 10/8/2008 5:13:23 PM 6006 EventLog None N/A P2
Information 10/8/2008 12:34:24 PM 20159 RemoteAccess None N/A
P2
Information 10/8/2008 12:28:00 PM 20158 RemoteAccess None N/A
P2
Information 10/8/2008 10:12:10 AM 135 Removable Storage Service
None N/A P2
Information 10/8/2008 10:11:47 AM 26 Application Popup None N/A
P2
Information 10/8/2008 10:11:13 AM 17 avgntdd None N/A P2
Error 10/8/2008 10:11:27 AM 7026 Service Control Manager None N/A
P2
Error 10/8/2008 10:11:26 AM 7001 Service Control Manager None N/A
P2
Error 10/8/2008 10:11:26 AM 7000 Service Control Manager None N/A
P2
Error 10/8/2008 10:11:24 AM 7000 Service Control Manager None N/A
P2
Error 10/8/2008 10:11:24 AM 7000 Service Control Manager None N/A
P2
Information 10/8/2008 10:11:23 AM 6005 EventLog None N/A P2
Information 10/8/2008 10:11:23 AM 6009 EventLog None N/A P2
Information 10/8/2008 10:10:10 AM 6006 EventLog None N/A P2
Information 10/8/2008 10:07:13 AM 160 Removable Storage Service
None N/A P2
Information 10/8/2008 10:03:10 AM 134 Removable Storage Service
None N/A P2
Information 10/8/2008 9:32:47 AM 135 Removable Storage Service
None N/A P2
Information 10/8/2008 9:30:34 AM 160 Removable Storage Service
None N/A P2
Information 10/8/2008 9:27:59 AM 134 Removable Storage Service
None N/A P2
Information 10/8/2008 8:37:39 AM 20159 RemoteAccess None N/A
P2
Information 10/8/2008 5:30:43 AM 20158 RemoteAccess None N/A
P2
Information 10/8/2008 5:26:23 AM 26 Application Popup None N/A
P2
Information 10/8/2008 5:23:20 AM 17 avgntdd None N/A P2
Error 10/8/2008 5:23:33 AM 7026 Service Control Manager None N/A
P2
Error 10/8/2008 5:23:32 AM 7001 Service Control Manager None N/A
P2
Error 10/8/2008 5:23:32 AM 7000 Service Control Manager None N/A
P2
Error 10/8/2008 5:23:31 AM 7000 Service Control Manager None N/A
P2
Error 10/8/2008 5:23:31 AM 7000 Service Control Manager None N/A
P2
Information 10/8/2008 5:23:30 AM 6005 EventLog None N/A P2
Information 10/8/2008 5:23:30 AM 6009 EventLog None N/A P2
Information 10/7/2008 5:08:18 PM 6006 EventLog None N/A P2
Information 10/7/2008 7:26:25 AM 26 Application Popup None N/A
P2
Information 10/7/2008 7:26:06 AM 26 Application Popup None N/A
P2
Information 10/7/2008 7:24:41 AM 26 Application Popup None N/A
P2
Information 10/7/2008 7:24:19 AM 26 Application Popup None N/A
P2
Information 10/7/2008 7:23:30 AM 26 Application Popup None N/A
P2
Information 10/7/2008 6:27:01 AM 26 Application Popup None N/A
P2
Information 10/7/2008 6:23:45 AM 20159 RemoteAccess None N/A
P2
Information 10/7/2008 4:37:31 AM 20158 RemoteAccess None N/A
P2
Information 10/7/2008 4:35:38 AM 26 Application Popup None N/A
P2
Information 10/7/2008 4:34:34 AM 17 avgntdd None N/A P2
Error 10/7/2008 4:34:47 AM 7026 Service Control Manager None N/A
P2
Error 10/7/2008 4:34:47 AM 7001 Service Control Manager None N/A
P2
Error 10/7/2008 4:34:47 AM 7000 Service Control Manager None N/A
P2
Error 10/7/2008 4:34:45 AM 7000 Service Control Manager None N/A
P2
Error 10/7/2008 4:34:45 AM 7000 Service Control Manager None N/A
P2
Information 10/7/2008 4:34:44 AM 6005 EventLog None N/A P2
Information 10/7/2008 4:34:44 AM 6009 EventLog None N/A P2
Information 10/6/2008 5:02:03 PM 6006 EventLog None N/A P2
Information 10/6/2008 3:26:09 PM 20159 RemoteAccess None N/A
P2
Information 10/6/2008 3:12:13 PM 20158 RemoteAccess None N/A
P2
Information 10/6/2008 1:17:06 PM 20159 RemoteAccess None N/A
P2
Information 10/6/2008 1:12:08 PM 20158 RemoteAccess None N/A
P2
Information 10/6/2008 7:56:50 AM 20159 RemoteAccess None N/A
P2
Information 10/6/2008 6:15:18 AM 20158 RemoteAccess None N/A
P2
Information 10/6/2008 6:10:08 AM 26 Application Popup None N/A
P2
Information 10/6/2008 6:09:23 AM 17 avgntdd None N/A P2
Error 10/6/2008 6:09:37 AM 7026 Service Control Manager None N/A
P2
Error 10/6/2008 6:09:36 AM 7001 Service Control Manager None N/A
P2
Error 10/6/2008 6:09:36 AM 7000 Service Control Manager None N/A
P2
Error 10/6/2008 6:09:34 AM 7000 Service Control Manager None N/A
P2
Error 10/6/2008 6:09:34 AM 7000 Service Control Manager None N/A
P2
Information 10/6/2008 6:09:33 AM 6005 EventLog None N/A P2
Information 10/6/2008 6:09:33 AM 6009 EventLog None N/A P2
Information 10/5/2008 6:29:17 PM 6006 EventLog None N/A P2
Information 10/5/2008 5:46:53 PM 20159 RemoteAccess None N/A
P2
Information 10/5/2008 5:40:42 PM 20158 RemoteAccess None N/A
P2
Information 10/5/2008 3:10:44 PM 20159 RemoteAccess None N/A
P2
Information 10/5/2008 1:39:36 PM 20158 RemoteAccess None N/A
P2
Information 10/5/2008 8:56:25 AM 20159 RemoteAccess None N/A
P2
Information 10/5/2008 8:56:07 AM 26 Application Popup None N/A
P2
Information 10/5/2008 8:55:50 AM 20158 RemoteAccess None N/A
P2
Information 10/5/2008 8:42:26 AM 20159 RemoteAccess None N/A
P2
Information 10/5/2008 6:13:14 AM 20158 RemoteAccess None N/A
P2
Information 10/5/2008 6:11:31 AM 26 Application Popup None N/A
P2
Information 10/5/2008 6:10:12 AM 17 avgntdd None N/A P2
Error 10/5/2008 6:10:25 AM 7026 Service Control Manager None N/A
P2
Error 10/5/2008 6:10:25 AM 7001 Service Control Manager None N/A
P2
Error 10/5/2008 6:10:25 AM 7000 Service Control Manager None N/A
P2
Error 10/5/2008 6:10:24 AM 7000 Service Control Manager None N/A
P2
Error 10/5/2008 6:10:23 AM 7000 Service Control Manager None N/A
P2
Information 10/5/2008 6:10:22 AM 6005 EventLog None N/A P2
Information 10/5/2008 6:10:22 AM 6009 EventLog None N/A P2
Information 10/4/2008 5:42:11 PM 6006 EventLog None N/A P2
Information 10/4/2008 5:40:10 PM 20159 RemoteAccess None N/A
P2
Information 10/4/2008 5:34:10 PM 20158 RemoteAccess None N/A
P2
Error 10/4/2008 5:33:14 PM 7000 Service Control Manager None N/A
P2
Information 10/4/2008 5:33:14 PM 26 Application Popup None N/A
P2
Error 10/4/2008 5:33:13 PM 7000 Service Control Manager None N/A
P2
Information 10/4/2008 5:33:13 PM 26 Application Popup None N/A
P2
Information 10/4/2008 2:43:44 PM 20159 RemoteAccess None N/A
P2
Information 10/4/2008 2:28:49 PM 20158 RemoteAccess None N/A
P2
Information 10/4/2008 10:21:44 AM 20159 RemoteAccess None N/A
P2
Information 10/4/2008 10:04:45 AM 20158 RemoteAccess None N/A
P2
Information 10/4/2008 8:19:50 AM 20159 RemoteAccess None N/A
P2
Information 10/4/2008 5:58:52 AM 20158 RemoteAccess None N/A
P2
Information 10/4/2008 5:56:51 AM 26 Application Popup None N/A
P2
Information 10/4/2008 5:56:12 AM 17 avgntdd None N/A P2
Error 10/4/2008 5:56:26 AM 7026 Service Control Manager None N/A
P2
Error 10/4/2008 5:56:25 AM 7001 Service Control Manager None N/A
P2
Error 10/4/2008 5:56:25 AM 7000 Service Control Manager None N/A
P2
Error 10/4/2008 5:56:23 AM 7000 Service Control Manager None N/A
P2
Error 10/4/2008 5:56:23 AM 7000 Service Control Manager None N/A
P2
Information 10/4/2008 5:56:22 AM 6005 EventLog None N/A P2
Information 10/4/2008 5:56:22 AM 6009 EventLog None N/A P2
Information 10/3/2008 7:23:31 PM 6006 EventLog None N/A P2
Information 10/3/2008 6:12:49 PM 20159 RemoteAccess None N/A
P2
Information 10/3/2008 6:03:48 PM 20158 RemoteAccess None N/A
P2
Information 10/3/2008 5:14:56 PM 20159 RemoteAccess None N/A
P2
Information 10/3/2008 5:09:28 PM 20158 RemoteAccess None N/A
P2
Information 10/3/2008 10:01:05 AM 20159 RemoteAccess None N/A
P2
Information 10/3/2008 9:44:43 AM 20158 RemoteAccess None N/A
P2
Information 10/3/2008 8:30:52 AM 20159 RemoteAccess None N/A
P2
Information 10/3/2008 8:20:39 AM 20158 RemoteAccess None N/A
P2
Information 10/3/2008 7:30:46 AM 20159 RemoteAccess None N/A
P2
Information 10/3/2008 6:27:43 AM 20158 RemoteAccess None N/A
P2
Information 10/3/2008 6:15:37 AM 26 Application Popup None N/A
P2
Information 10/3/2008 6:13:29 AM 17 avgntdd None N/A P2
Error 10/3/2008 6:13:43 AM 7026 Service Control Manager None N/A
P2
Error 10/3/2008 6:13:42 AM 7001 Service Control Manager None N/A
P2
Error 10/3/2008 6:13:42 AM 7000 Service Control Manager None N/A
P2
Error 10/3/2008 6:13:40 AM 7000 Service Control Manager None N/A
P2
Error 10/3/2008 6:13:40 AM 7000 Service Control Manager None N/A
P2
Information 10/3/2008 6:13:39 AM 6005 EventLog None N/A P2
Information 10/3/2008 6:13:39 AM 6009 EventLog None N/A P2
Information 10/2/2008 6:01:37 PM 6006 EventLog None N/A P2
Information 10/2/2008 5:23:32 PM 26 Application Popup None N/A
P2
Information 10/2/2008 5:22:49 PM 17 avgntdd None N/A P2
Error 10/2/2008 5:23:02 PM 7026 Service Control Manager None N/A
P2
Error 10/2/2008 5:23:01 PM 7001 Service Control Manager None N/A
P2
Error 10/2/2008 5:23:01 PM 7000 Service Control Manager None N/A
P2
Error 10/2/2008 5:23:00 PM 7000 Service Control Manager None N/A
P2
Error 10/2/2008 5:23:00 PM 7000 Service Control Manager None N/A
P2
Information 10/2/2008 5:22:59 PM 6005 EventLog None N/A P2
Information 10/2/2008 5:22:59 PM 6009 EventLog None N/A P2
Information 10/2/2008 5:21:47 PM 6006 EventLog None N/A P2
Information 10/2/2008 2:59:40 PM 20159 RemoteAccess None N/A
P2
Information 10/2/2008 2:57:24 PM 20158 RemoteAccess None N/A
P2
Information 10/2/2008 1:22:20 PM 20159 RemoteAccess None N/A
P2
Information 10/2/2008 1:14:42 PM 20158 RemoteAccess None N/A
P2
Information 10/2/2008 9:27:16 AM 20159 RemoteAccess None N/A
P2
Information 10/2/2008 5:59:05 AM 20158 RemoteAccess None N/A
P2
Information 10/2/2008 5:58:12 AM 26 Application Popup None N/A
P2
Information 10/2/2008 5:57:30 AM 17 avgntdd None N/A P2
Error 10/2/2008 5:57:44 AM 7026 Service Control Manager None N/A
P2
Error 10/2/2008 5:57:43 AM 7001 Service Control Manager None N/A
P2
Error 10/2/2008 5:57:43 AM 7000 Service Control Manager None N/A
P2
Error 10/2/2008 5:57:42 AM 7000 Service Control Manager None N/A
P2
Error 10/2/2008 5:57:42 AM 7000 Service Control Manager None N/A
P2
Information 10/2/2008 5:57:40 AM 6005 EventLog None N/A P2
Information 10/2/2008 5:57:40 AM 6009 EventLog None N/A P2
Information 10/1/2008 5:02:37 PM 6006 EventLog None N/A P2
Information 10/1/2008 3:37:37 PM 20159 RemoteAccess None N/A
P2
Information 10/1/2008 3:34:36 PM 20158 RemoteAccess None N/A
P2
Information 10/1/2008 2:27:03 PM 20159 RemoteAccess None N/A
P2
Information 10/1/2008 2:26:36 PM 20158 RemoteAccess None N/A
P2
Information 10/1/2008 2:14:38 PM 135 Removable Storage Service
None N/A P2
Information 10/1/2008 2:14:37 PM 160 Removable Storage Service
None N/A P2
Information 10/1/2008 2:10:55 PM 134 Removable Storage Service
None N/A P2
Information 10/1/2008 8:19:41 AM 20159 RemoteAccess None N/A
P2
Information 10/1/2008 5:57:08 AM 20158 RemoteAccess None N/A
P2
Information 10/1/2008 5:55:43 AM 26 Application Popup None N/A
P2
Information 10/1/2008 5:52:16 AM 17 avgntdd None N/A P2
Error 10/1/2008 5:52:30 AM 7026 Service Control Manager None N/A
P2
Error 10/1/2008 5:52:29 AM 7001 Service Control Manager None N/A
P2
Error 10/1/2008 5:52:29 AM 7000 Service Control Manager None N/A
P2
Error 10/1/2008 5:52:27 AM 7000 Service Control Manager None N/A
P2
Error 10/1/2008 5:52:27 AM 7000 Service Control Manager None N/A
P2
Information 10/1/2008 5:52:26 AM 6005 EventLog None N/A P2
Information 10/1/2008 5:52:26 AM 6009 EventLog None N/A P2
Information 9/30/2008 5:14:22 PM 6006 EventLog None N/A P2
Information 9/30/2008 4:37:01 PM 26 Application Popup None N/A
P2
Information 9/30/2008 4:19:21 PM 20159 RemoteAccess None N/A
P2
Information 9/30/2008 3:47:20 PM 20158 RemoteAccess None N/A
P2
Information 9/30/2008 7:34:45 AM 20159 RemoteAccess None N/A
P2
Information 9/30/2008 5:49:39 AM 20158 RemoteAccess None N/A
P2
Information 9/30/2008 5:47:52 AM 26 Application Popup None N/A
P2
Information 9/30/2008 5:47:18 AM 17 avgntdd None N/A P2
Error 9/30/2008 5:47:31 AM 7026 Service Control Manager None N/A
P2
Error 9/30/2008 5:47:30 AM 7001 Service Control Manager None N/A
P2
Error 9/30/2008 5:47:30 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:47:29 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:47:29 AM 7000 Service Control Manager None N/A
P2
Information 9/30/2008 5:47:28 AM 6005 EventLog None N/A P2
Information 9/30/2008 5:47:28 AM 6009 EventLog None N/A P2
Information 9/30/2008 5:46:16 AM 6006 EventLog None N/A P2
Information 9/30/2008 5:43:54 AM 26 Application Popup None N/A
P2
Information 9/30/2008 5:43:20 AM 17 avgntdd None N/A P2
Error 9/30/2008 5:43:33 AM 7026 Service Control Manager None N/A
P2
Error 9/30/2008 5:43:32 AM 7001 Service Control Manager None N/A
P2
Error 9/30/2008 5:43:32 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:43:31 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:43:31 AM 7000 Service Control Manager None N/A
P2
Information 9/30/2008 5:43:30 AM 6005 EventLog None N/A P2
Information 9/30/2008 5:43:30 AM 6009 EventLog None N/A P2
Information 9/30/2008 5:42:19 AM 6006 EventLog None N/A P2
Information 9/30/2008 5:35:55 AM 26 Application Popup None N/A
P2
Information 9/30/2008 5:34:34 AM 17 avgntdd None N/A P2
Error 9/30/2008 5:34:48 AM 7026 Service Control Manager None N/A
P2
Error 9/30/2008 5:34:47 AM 7001 Service Control Manager None N/A
P2
Error 9/30/2008 5:34:47 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:34:45 AM 7000 Service Control Manager None N/A
P2
Error 9/30/2008 5:34:45 AM 7000 Service Control Manager None N/A
P2
Information 9/30/2008 5:34:44 AM 6005 EventLog None N/A P2
Information 9/30/2008 5:34:44 AM 6009 EventLog None N/A P2
Information 9/29/2008 6:34:31 PM 6006 EventLog None N/A P2
Information 9/29/2008 4:03:41 PM 20159 RemoteAccess None N/A
P2
Information 9/29/2008 3:37:30 PM 20158 RemoteAccess None N/A
P2
Information 9/29/2008 3:20:10 PM 20159 RemoteAccess None N/A
P2
Information 9/29/2008 3:02:06 PM 20158 RemoteAccess None N/A
P2
Information 9/29/2008 2:14:35 PM 20159 RemoteAccess None N/A
P2
Information 9/29/2008 1:23:44 PM 20158 RemoteAccess None N/A
P2
Information 9/29/2008 9:09:50 AM 20159 RemoteAccess None N/A
P2
Information 9/29/2008 6:34:17 AM 20158 RemoteAccess None N/A
P2
Information 9/29/2008 6:33:04 AM 26 Application Popup None N/A
P2
Information 9/29/2008 6:31:12 AM 17 avgntdd None N/A P2
Error 9/29/2008 6:31:26 AM 7026 Service Control Manager None N/A
P2
Error 9/29/2008 6:31:25 AM 7001 Service Control Manager None N/A
P2
Error 9/29/2008 6:31:25 AM 7000 Service Control Manager None N/A
P2
Error 9/29/2008 6:31:23 AM 7000 Service Control Manager None N/A
P2
Error 9/29/2008 6:31:23 AM 7000 Service Control Manager None N/A
P2
Information 9/29/2008 6:31:22 AM 6005 EventLog None N/A P2
Information 9/29/2008 6:31:22 AM 6009 EventLog None N/A P2
Information 9/28/2008 7:22:05 PM 6006 EventLog None N/A P2
Error 9/28/2008 6:19:39 PM 7000 Service Control Manager None N/A
P2
Error 9/28/2008 6:19:39 PM 7000 Service Control Manager None N/A
P2
Error 9/28/2008 6:16:12 PM 7000 Service Control Manager None N/A
P2
Error 9/28/2008 6:16:12 PM 7000 Service Control Manager None N/A
P2
Information 9/28/2008 2:44:39 PM 20159 RemoteAccess None N/A
P2
Information 9/28/2008 2:42:33 PM 20158 RemoteAccess None N/A
P2
Information 9/28/2008 9:11:21 AM 20159 RemoteAccess None N/A
P2
Information 9/28/2008 7:45:09 AM 20158 RemoteAccess None N/A
P2
Information 9/28/2008 7:32:44 AM 20159 RemoteAccess None N/A
P2
Information 9/28/2008 6:53:51 AM 20158 RemoteAccess None N/A
P2
Information 9/28/2008 6:51:12 AM 26 Application Popup None N/A
P2
Information 9/28/2008 6:44:47 AM 17 avgntdd None N/A P2
Error 9/28/2008 6:45:01 AM 7026 Service Control Manager None N/A
P2
Error 9/28/2008 6:45:00 AM 7001 Service Control Manager None N/A
P2
Error 9/28/2008 6:45:00 AM 7000 Service Control Manager None N/A
P2
Error 9/28/2008 6:44:59 AM 7000 Service Control Manager None N/A
P2
Error 9/28/2008 6:44:58 AM 7000 Service Control Manager None N/A
P2
Information 9/28/2008 6:44:57 AM 6005 EventLog None N/A P2
Information 9/28/2008 6:44:57 AM 6009 EventLog None N/A P2
Information 9/27/2008 5:55:43 PM 6006 EventLog None N/A P2
Information 9/27/2008 12:31:47 PM 26 Application Popup None N/A
P2
Information 9/27/2008 12:30:55 PM 20159 RemoteAccess None N/A
P2
Information 9/27/2008 12:29:02 PM 26 Application Popup None N/A
P2
Information 9/27/2008 12:05:20 PM 20158 RemoteAccess None N/A
P2
Information 9/27/2008 7:37:27 AM 20159 RemoteAccess None N/A
P2
Information 9/27/2008 6:24:09 AM 20158 RemoteAccess None N/A
P2
Information 9/27/2008 6:22:39 AM 26 Application Popup None N/A
P2
Information 9/27/2008 6:18:43 AM 17 avgntdd None N/A P2
Error 9/27/2008 6:18:57 AM 7026 Service Control Manager None N/A
P2
Error 9/27/2008 6:18:56 AM 7001 Service Control Manager None N/A
P2
Error 9/27/2008 6:18:56 AM 7000 Service Control Manager None N/A
P2
Error 9/27/2008 6:18:54 AM 7000 Service Control Manager None N/A
P2
Error 9/27/2008 6:18:54 AM 7000 Service Control Manager None N/A
P2
Information 9/27/2008 6:18:53 AM 6005 EventLog None N/A P2
Information 9/27/2008 6:18:53 AM 6009 EventLog None N/A P2
Information 9/26/2008 5:57:43 PM 6006 EventLog None N/A P2
Information 9/26/2008 1:25:40 PM 20159 RemoteAccess None N/A
P2
Information 9/26/2008 1:22:19 PM 20158 RemoteAccess None N/A
P2
Information 9/26/2008 10:12:39 AM 20159 RemoteAccess None N/A
P2
Information 9/26/2008 9:43:16 AM 20158 RemoteAccess None N/A
P2
Information 9/26/2008 8:34:33 AM 20159 RemoteAccess None N/A
P2
Information 9/26/2008 6:11:05 AM 20158 RemoteAccess None N/A
P2
Information 9/26/2008 5:51:54 AM 26 Application Popup None N/A
P2
Information 9/26/2008 5:51:15 AM 17 avgntdd None N/A P2
Error 9/26/2008 5:51:28 AM 7026 Service Control Manager None N/A
P2
Error 9/26/2008 5:51:27 AM 7001 Service Control Manager None N/A
P2
Error 9/26/2008 5:51:27 AM 7000 Service Control Manager None N/A
P2
Error 9/26/2008 5:51:26 AM 7000 Service Control Manager None N/A
P2
Error 9/26/2008 5:51:26 AM 7000 Service Control Manager None N/A
P2
Information 9/26/2008 5:51:25 AM 6005 EventLog None N/A P2
Information 9/26/2008 5:51:25 AM 6009 EventLog None N/A P2
Information 9/25/2008 4:59:23 PM 6006 EventLog None N/A P2
Information 9/25/2008 3:27:46 PM 20159 RemoteAccess None N/A
P2
Information 9/25/2008 3:27:19 PM 20158 RemoteAccess None N/A
P2
Information 9/25/2008 2:31:42 PM 20159 RemoteAccess None N/A
P2
Information 9/25/2008 2:11:15 PM 20158 RemoteAccess None N/A
P2
Information 9/25/2008 10:11:55 AM 20159 RemoteAccess None N/A
P2
Information 9/25/2008 7:21:45 AM 20158 RemoteAccess None N/A
P2
Information 9/25/2008 6:52:08 AM 26 Application Popup None N/A
P2
Information 9/25/2008 6:51:27 AM 17 avgntdd None N/A P2
Error 9/25/2008 6:51:40 AM 7026 Service Control Manager None N/A
P2
Error 9/25/2008 6:51:39 AM 7001 Service Control Manager None N/A
P2
Error 9/25/2008 6:51:39 AM 7000 Service Control Manager None N/A
P2
Error 9/25/2008 6:51:38 AM 7000 Service Control Manager None N/A
P2
Error 9/25/2008 6:51:38 AM 7000 Service Control Manager None N/A
P2
Information 9/25/2008 6:51:37 AM 6005 EventLog None N/A P2
Information 9/25/2008 6:51:37 AM 6009 EventLog None N/A P2
Information 9/24/2008 6:52:46 PM 6006 EventLog None N/A P2
Information 9/24/2008 4:52:05 PM 20159 RemoteAccess None N/A
P2
Information 9/24/2008 4:34:04 PM 20158 RemoteAccess None N/A
P2
Information 9/24/2008 1:02:12 PM 135 Removable Storage Service
None N/A P2
Information 9/24/2008 1:02:12 PM 160 Removable Storage Service
None N/A P2
Information 9/24/2008 1:00:31 PM 134 Removable Storage Service
None N/A P2
Error 9/24/2008 12:41:26 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:24 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:22 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:19 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:17 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:14 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:12 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:10 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:09 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:07 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:05 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:03 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:41:01 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:58 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:56 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:53 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:51 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:48 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:46 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:44 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:41 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:39 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:37 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:35 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:33 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:32 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:30 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:28 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:26 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:24 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:22 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:19 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:17 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:15 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:13 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:11 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:08 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:06 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:04 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:40:01 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:59 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:57 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:55 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:52 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:50 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:48 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:45 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:44 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:41 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:39 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:38 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:35 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:32 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:30 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:28 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:25 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:23 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:22 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:20 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:17 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:15 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:12 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:10 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:07 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:05 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:02 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:39:00 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:58 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:56 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:54 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:52 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:50 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:48 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:46 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:43 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:41 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:39 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:37 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:35 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:32 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:30 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:28 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:26 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:24 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:22 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:20 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:18 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:16 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:13 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:10 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:08 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:06 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:38:01 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:59 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:57 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:55 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:36 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:34 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:31 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:29 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:28 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:25 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:23 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:21 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:19 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:16 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:14 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:12 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:10 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:08 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:06 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:03 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:37:01 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:59 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:56 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:55 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:52 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:50 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:48 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:45 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:43 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:41 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:39 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:37 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:36 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:33 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:27 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:25 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:24 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:22 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:20 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:18 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:16 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:14 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:12 PM 7 Cdrom None N/A P2
Error 9/24/2008 12:36:10 PM 7 Cdrom None N/A P2
Information 9/24/2008 12:01:42 PM 20159 RemoteAccess None N/A
P2
Information 9/24/2008 11:52:25 AM 20158 RemoteAccess None N/A
P2
Information 9/24/2008 11:20:30 AM 20159 RemoteAccess None N/A
P2
Information 9/24/2008 11:14:38 AM 20158 RemoteAccess None N/A
P2
Information 9/24/2008 8:33:46 AM 20159 RemoteAccess None N/A
P2
Information 9/24/2008 6:09:13 AM 20158 RemoteAccess None N/A
P2
Information 9/24/2008 6:08:12 AM 26 Application Popup None N/A
P2
Information 9/24/2008 6:07:31 AM 17 avgntdd None N/A P2
Error 9/24/2008 6:07:44 AM 7026 Service Control Manager None N/A
P2
Error 9/24/2008 6:07:43 AM 7001 Service Control Manager None N/A
P2
Error 9/24/2008 6:07:43 AM 7000 Service Control Manager None N/A
P2
Error 9/24/2008 6:07:42 AM 7000 Service Control Manager None N/A
P2
Error 9/24/2008 6:07:42 AM 7000 Service Control Manager None N/A
P2
Information 9/24/2008 6:07:41 AM 6005 EventLog None N/A P2
Information 9/24/2008 6:07:41 AM 6009 EventLog None N/A P2
Information 9/23/2008 6:52:28 PM 6006 EventLog None N/A P2

Advice?

ms
 
Go in the Services Management Console and start the DHCP Client service.
You may want to set the start type for this service to "Automatic" and
reboot the computer. To open the Services Management Console enter
Services.msc in the Start Menu Run box.

It might help if you post the content of the most recent Event IDs 7000
& 7001. To open the Event Viewer enter Eventvwr or eventvwr.msc in
the Start Menu Run box. Double click on the error events then click on
the little clipboard/paper pages icon to copy the event then paste it to
your next reply. The format of the error message will look like this:


Event Type: Information
Event Source: SceCli
Event Category: None
Event ID: 1704
Date: 11/10/2008
Time: 4:44:29 AM
User: N/A
Computer: JEAN-GUY-HOM
Description:
Security policy in the Group policy objects are applied successfully.

I also notice that Events 20158 and 20159 are happening within seconds
or minutes of each other, Event 20158 indicates that a Remote Connection
was made and Event 20159 indicates that the connection was terminated,
you may want to further investigate what is happening with this.

John
 
Go in the Services Management Console and start the DHCP Client
service.
You may want to set the start type for this service to "Automatic"
and
reboot the computer.
Click to expand...

I can't copy the data, but the DHCP Client service is *already* started,
and is already on "Automatic".

To open the Services Management Console enter
Services.msc in the Start Menu Run box.

It might help if you post the content of the most recent Event IDs
7000 & 7001. To open the Event Viewer enter Eventvwr or
eventvwr.msc in the Start Menu Run box. Double click on the error
events then click on the little clipboard/paper pages icon to copy the
event then paste it to your next reply. The format of the error
message will look like this:


Event Type: Information
Event Source: SceCli
Event Category: None
Event ID: 1704
Date: 11/10/2008
Time: 4:44:29 AM
User: N/A
Computer: JEAN-GUY-HOM
Description:
Security policy in the Group policy objects are applied successfully.

I also notice that Events 20158 and 20159 are happening within seconds
or minutes of each other, Event 20158 indicates that a Remote
Connection was made and Event 20159 indicates that the connection was
terminated, you may want to further investigate what is happening with
this.

John
Click to expand...

I did that, copies below, XXX hides my username:
---------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20159
Date: 10/5/2008
Time: 3:10:44 PM
User: N/A
Computer: P2
Description:
The connection to copper made by user (e-mail address removed) using device COM3
was disconnected.
------------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20158
Date: 10/5/2008
Time: 5:40:42 PM
User: N/A
Computer: P2
Description:
The user (e-mail address removed) successfully established a connection to copper
using the device COM3.
---------------
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 9/25/2008
Time: 6:51:38 AM
User: N/A
Computer: P2
Description:
The HWiNFO32 Kernel Driver service failed to start due to the following
error: The system cannot find the file specified.

First, where is Event Viewer on the hard drive (search didn't find it),
is it a standalone exe?

Then, how do you detect Event ID in Event Viewer? I was just lucky in
selecting the above, see no way view ID. I did not locate 7001.

Since I haven't yet changed anything, it still does not browse.

Advice?

ms
 
ms said:
I did that, copies below, XXX hides my username:
---------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20159
Date: 10/5/2008
Time: 3:10:44 PM
User: N/A
Computer: P2
Description:
The connection to copper made by user (e-mail address removed) using device COM3
was disconnected.
------------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20158
Date: 10/5/2008
Time: 5:40:42 PM
User: N/A
Computer: P2
Description:
The user (e-mail address removed) successfully established a connection to copper
using the device COM3.
Click to expand...

I take it that copper.net is your ISP and that COM3 is your modem port.
The above are not in chronological order. Make sure that the Event
Log is sorted by date and check that Events 20159 are not happening
almost immediately after Events 20158, that would indicate that your
connection is being dropped almost as soon as it is made.
---------------
Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 9/25/2008
Time: 6:51:38 AM
User: N/A
Computer: P2
Description:
The HWiNFO32 Kernel Driver service failed to start due to the following
error: The system cannot find the file specified.
Click to expand...

I'm not sure what the HWiNFO32 Kernel Driver is, you would have to
search the internet to find out more about it, but that error dates from
September 25th, it may just be an old one time only error. It might
help if you clean out the log and work with a clean list of recent and
current events. To clear the log right-click on System Log and select
"Clear all Events", there is no need to save to log before you clear it.
Reboot your computer and try connecting to the internet and then take
a look at your log to see what is going on.

First, where is Event Viewer on the hard drive (search didn't find it),
is it a standalone exe?
Click to expand...

It's in the System32 folder, just launch it from the Run box or
right-click on "My Computer" and select "Manage", or look in the Start
Menu>Programs>Administartive Tools.

Then, how do you detect Event ID in Event Viewer? I was just lucky in
selecting the above, see no way view ID. I did not locate 7001.
Click to expand...

Look at the columns at the top. If you don't see the "Event" Column
click on the View Menu and add the column to the displayed list.

John
 
I take it that copper.net is your ISP and that COM3 is your modem
port.
The above are not in chronological order. Make sure that the Event
Log is sorted by date and check that Events 20159 are not happening
almost immediately after Events 20158, that would indicate that your
connection is being dropped almost as soon as it is made.
Click to expand...

Thanks for the help.

I adjusted the Event Viewer as you suggested, new data:
----------------
Type Date Time Source Category User Computer Event
Information 10/13/2008 1:45:21 PM RemoteAccess None N/A P2
20159
Information 10/13/2008 1:44:56 PM RemoteAccess None N/A P2
20158
-------------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20159
Date: 10/13/2008
Time: 1:45:21 PM
User: N/A
Computer: P2
Description:
The connection to copper made by user (e-mail address removed) using device COM3
was disconnected.
------------------
Event Type: Information
Event Source: RemoteAccess
Event Category: None
Event ID: 20158
Date: 10/13/2008
Time: 1:44:56 PM
User: N/A
Computer: P2
Description:
The user (e-mail address removed) successfully established a connection to copper
using the device COM3.

The data shows that on DUN, I connected to my ISP, tried to browse,
failed, and then I disconnected the DUN.
I'm not sure what the HWiNFO32 Kernel Driver is, you would have to
search the internet to find out more about it, but that error dates
from September 25th, it may just be an old one time only error.
Click to expand...

That is just a utility I have, not normally running, no impact here IMO.

It
might help if you clean out the log and work with a clean list of
recent and current events. To clear the log right-click on System Log
and select "Clear all Events", there is no need to save to log before
you clear it.
Reboot your computer and try connecting to the internet and then
take
a look at your log to see what is going on.



It's in the System32 folder, just launch it from the Run box or
right-click on "My Computer" and select "Manage", or look in the Start
Menu>Programs>Administartive Tools.



Look at the columns at the top. If you don't see the "Event" Column
click on the View Menu and add the column to the displayed list.

John
Click to expand...

It is a simple executable, I copied it out of the System folder, still
works OK.

I posted data on 20158/9, that's all there is since I cleaned the log, I
guess events 7000/1 are old data, not needed?

Next step?

Thanks,

ms
 
ms said:
I adjusted the Event Viewer as you suggested, new data:
----------------
Type Date Time Source Category User Computer Event
Information 10/13/2008 1:45:21 PM RemoteAccess None N/A P2
20159
Information 10/13/2008 1:44:56 PM RemoteAccess None N/A P2

(sniped..)

The data shows that on DUN, I connected to my ISP, tried to browse,
failed, and then I disconnected the DUN.
I posted data on 20158/9, that's all there is since I cleaned the log, I
guess events 7000/1 are old data, not needed?
Click to expand...

If there are no other new errors in the System log then you can forget
about the old events.

Next step?
Click to expand...

When you connect to the internet can you ping sites? Once connected
open a command prompt and try to ping google.com, do you get a reply?
Can you ping your ISP's DNS address?

Is the machine virus/spyware free? Is your firewall properly configured?

John
 
If there are no other new errors in the System log then you can forget
about the old events.



When you connect to the internet can you ping sites? Once connected
open a command prompt and try to ping google.com, do you get a reply?
Can you ping your ISP's DNS address?
Click to expand...

Here is the data:
--------
11:32:03.671 *** STOP PINGING ***
11:32:19.062 *** START PINGING ***
11:32:20.187 WSA Error = 11001: Host not found.
11:32:20.187 Ping 'ping google.com' returned FAILED.
11:32:25.046 WSA Error = 11001: Host not found.
11:32:25.046 Ping 'ping google.com' returned FAILED.
11:32:29.578 WSA Error = 11001: Host not found.
11:32:29.578 Ping 'ping google.com' returned FAILED.
11:32:34.906 WSA Error = 11001: Host not found.
11:32:34.906 Ping 'ping google.com' returned FAILED.
11:32:39.546 WSA Error = 11001: Host not found.
11:32:39.546 Ping 'ping google.com' returned FAILED.
11:32:40.906 *** STOP PINGING ***

Sorry, I forgot the other address- my ISP, but when connected, the DUN
tooltip figures all look normal. Symptoms so far are I can connect to my
ISP normally, can't go on internet. I am typing on a W98 machine using
same ISP.

I tried the commandline ping, not familiar with this method so no luck.
The data was with a GUI utility that copied to clipboard, works well.
Is the machine virus/spyware free?
Click to expand...
I used to run several big complex install type AV programs, gave up on
them, now run a few small AV/malware scanners, never show anything.

Is your firewall properly configured?
I have used Kerio on various machines for years, here it browsed Ok for
several years, when I stoppped browsing, first thing to check- disabled
the firewall, no help, but it is properly configured.
?

ms
 
If there are no other new errors in the System log then you can forget
about the old events.



When you connect to the internet can you ping sites? Once connected
open a command prompt and try to ping google.com, do you get a reply?
Can you ping your ISP's DNS address?

Is the machine virus/spyware free? Is your firewall properly
configured?

John
Click to expand...
Here is the rest of the data, pinging my ISP.
------------
12:38:01.171 *** STOP PINGING ***
12:38:48.968 *** START PINGING ***
12:38:49.218 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128
12:38:49.218 Ping ' copper.net' returned OK.
12:38:53.968 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128
12:38:53.968 Ping ' copper.net' returned OK.
12:38:58.968 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128
12:38:58.968 Ping ' copper.net' returned OK.
12:39:03.968 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128
12:39:03.968 Ping ' copper.net' returned OK.
12:39:08.968 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128
12:39:08.968 Ping ' copper.net' returned OK.
12:39:12.375 *** STOP PINGING ***

I think this says I can ping my ISP, can't ping a web address.

Better mention, I have used Firefox from the Netscape days, the current
version I use is 2.0.0.17 for the past 2 weeks, before it was 2.0.0.16
that browsed for about a year OK, then the problem several months ago,
revert to old registry solved that for awhile, a few days ago it came
back. AFAIK, it's not a browser issue.

ms
 
ms said:
Here is the data:
--------
11:32:03.671 *** STOP PINGING ***
11:32:19.062 *** START PINGING ***
11:32:20.187 WSA Error = 11001: Host not found.
11:32:20.187 Ping 'ping google.com' returned FAILED.
11:32:25.046 WSA Error = 11001: Host not found.
11:32:25.046 Ping 'ping google.com' returned FAILED.
11:32:29.578 WSA Error = 11001: Host not found.
11:32:29.578 Ping 'ping google.com' returned FAILED.
11:32:34.906 WSA Error = 11001: Host not found.
11:32:34.906 Ping 'ping google.com' returned FAILED.
11:32:39.546 WSA Error = 11001: Host not found.
11:32:39.546 Ping 'ping google.com' returned FAILED.
11:32:40.906 *** STOP PINGING ***

Sorry, I forgot the other address- my ISP, but when connected, the DUN
tooltip figures all look normal. Symptoms so far are I can connect to my
ISP normally, can't go on internet. I am typing on a W98 machine using
same ISP.
Click to expand...

That means that your Windows 98 box is properly configured and that your
ISP's service is running fine, it doesn't tell us much of anything about
your Windows 2000 browsing problems.

I tried the commandline ping, not familiar with this method so no luck.
The data was with a GUI utility that copied to clipboard, works well.
Click to expand...

So far, based on the ping results you gave us above it appears that
you're not resoving DNS addresses, but without knowing if you can ping
by IP address we cannot be sure. Connect to the internet and then at
the Command Prompt issue the NSLOOKUP command and see if if you can
get the DNS server name and address.

Your GUI ping utility is probaby working fine but not knowing what this
utility is or if it is even designed for the NT line of operating
systems it would be helpful if you could confirm the ping results with
the native Windows 2000 ping utility. In the Start Menu run box enter
CMD then click on OK. At the Command Prompt enter the following commands:

ping 64.233.161.18

and then:

ping -a 64.233.161.18

You can send the results of the ping command to a text file if you want,
enter the following command:

ping -a 64.233.161.18 >c:\pingtest.txt

John
 
In
ms said:
Here is the rest of the data, pinging my ISP.
------------ ....
12:38:49.218 Reply from 4.243.1.63: bytes=64 time<0ms TTL=128 ....
I think this says I can ping my ISP, can't ping a web address.
Click to expand...

No it doesn't. There will never be any such thing as an instantaneous
response; the best response time you'll get will be fractions of a
millisecond. Did you edit what you posted to change it from "time<10ms"?

Beside, that is NOT your ISP. Open the command window and type at the
prompt:

D:\junk> nslookup 4.243.1.63
....
Name: dialup-4.243.1.63.Dial1.Seattle1.Level3.net
Address: 4.243.1.63

If you want to pin a machine at your ISP, try one of their nameservers:

D:\junk> nslookup -query=NS Seattle1.Level3.net
....
Seattle1.Level3.net nameserver = ns1.Level3.net
Seattle1.Level3.net nameserver = ns2.Level3.net
ns1.Level3.net internet address = 209.244.0.1
ns2.Level3.net internet address = 209.244.0.2

Make sure your DUN (Dial-Up-Networking) interface is using DHCP-assigned IP
address and name servers (right-click on the DUN definition in "Network and
Dial-up Connections" -> Properties -> Networking tab -> Internet Protocol
(TCP/IP) -> Properties, then choose BOTH automatic entries, save eberything
on your way out), then re-connect. If you still have connectivity problems,
go back to the basics in the command window. Copy and paste the entire
results of these 2 commands in your reply, please:

ipconfig /all

and

route print

In case copying from a command window is unfamiliar to you, just highlight
the text to copy with the pointer device, release the pointer and then press
the Enter key, then you can paste into your reply to this post.
Better mention, I have used Firefox from the Netscape days, the
current version I use is 2.0.0.17 ...
Click to expand...

Get Ff 3.x which has been available for some months now, most recent update
was last week or so. Using old software is begging for problems; there's a
good reason why new stuff is freely available. All your bookmarks etc. will
be retained.

BTW, also check your FF Tools -> Options -> Advanced -> Network tab ->
Settings button and make sure everything is as it should be wrt proxy usage.
 
That means that your Windows 98 box is properly configured and that
your ISP's service is running fine, it doesn't tell us much of
anything about your Windows 2000 browsing problems.



So far, based on the ping results you gave us above it appears that
you're not resoving DNS addresses, but without knowing if you can ping
by IP address we cannot be sure. Connect to the internet and then at
the Command Prompt issue the NSLOOKUP command and see if if you can
get the DNS server name and address.
Click to expand...
NSLOOKUP:
Default server:
nsi.insps.net
address: 65.247.64.21

Please see end of message.
Your GUI ping utility is probaby working fine but not knowing what
this utility is or if it is even designed for the NT line of operating
systems it would be helpful if you could confirm the ping results with
the native Windows 2000 ping utility. In the Start Menu run box enter
CMD then click on OK. At the Command Prompt enter the following
commands:

ping 64.233.161.18

and then:

ping -a 64.233.161.18

You can send the results of the ping command to a text file if you
want, enter the following command:

ping -a 64.233.161.18 >c:\pingtest.txt
Click to expand...
C:\>netstat 1>c:\Ping.bak

Good news- your earlier lookup command, my ISP text file did not have
that kind of data for my ISP so I called them. The address was wrong-
they had changed awhile ago, so I stopped browsing- wonderful! They send
a monthly billing email, could have notified people.

They had me, in Internet Settings, change from a listed wrong address to
"find DNS automatically". That did it!

A few minor questions:
My other XP and W98 machines work OK, so I guess I have to check as above
in each of them, they must be set to "find DNS automatically", or they
would have stopped browsing, as all my computers have the same DUN
settings.

Where is the normal log file that keeps track of events in W2K? I just
looked in C: and don't see it.

Thanks again

ms
 
b.jeswine said:
In

No it doesn't. There will never be any such thing as an instantaneous
response; the best response time you'll get will be fractions of a
millisecond. Did you edit what you posted to change it from
"time<10ms"?

Beside, that is NOT your ISP. Open the command window and type at the
prompt:

D:\junk> nslookup 4.243.1.63
...
Name: dialup-4.243.1.63.Dial1.Seattle1.Level3.net
Address: 4.243.1.63

If you want to pin a machine at your ISP, try one of their
nameservers:

D:\junk> nslookup -query=NS Seattle1.Level3.net
...
Seattle1.Level3.net nameserver = ns1.Level3.net
Seattle1.Level3.net nameserver = ns2.Level3.net
ns1.Level3.net internet address = 209.244.0.1
ns2.Level3.net internet address = 209.244.0.2

Make sure your DUN (Dial-Up-Networking) interface is using
DHCP-assigned IP address and name servers (right-click on the DUN
definition in "Network and Dial-up Connections" -> Properties ->
Networking tab -> Internet Protocol (TCP/IP) -> Properties, then
choose BOTH automatic entries, save eberything on your way out), then
re-connect. If you still have connectivity problems, go back to the
basics in the command window. Copy and paste the entire results of
these 2 commands in your reply, please:

ipconfig /all

and

route print

In case copying from a command window is unfamiliar to you, just
highlight the text to copy with the pointer device, release the
pointer and then press the Enter key, then you can paste into your
reply to this post.
Click to expand...
Thanks for the info, will save for next time. As in my other post in the
thread, the address was wrong, you detailed what I had to do to change
it.

Get Ff 3.x which has been available for some months now, most recent
update was last week or so. Using old software is begging for
problems; there's a good reason why new stuff is freely available. All
your bookmarks etc. will be retained.

BTW, also check your FF Tools -> Options -> Advanced -> Network tab ->
Settings button and make sure everything is as it should be wrt proxy
usage.
Click to expand...
I don't agree with "Using old software is begging for
problems". I don't want to start a big thread in this, just responding
to you.
I use W98SE on several machines (old software), never had real problems
that I see on the ng's, my W2K (old software) works fine with minimal
patches, careful browsing works for me. I use lots of freeware utilities
and in frequent cases, the next version has problems.

With Firefox, when they went to 3, they stopped using the bookmark
system, so I will plan to use 2.X for a long time in the future. Even
today, in a W98 machine, I went back from 2.0.0.17 to 2.0.0.15 as some
new features didn't work as well as the older version.

My general comment would be- try a newer version cautiously, but save the
older version just in case.

ms
 
ms said:
Normally my W2000/SP4 custom desktop runs fine. It was built with SP4
installed 3 years ago, no patches since then, daily browsing (DUN)
with Firefox and Xnews newsreader since then, never *had* problems
until about 6 weeks ago.

I don't use MS software except for the OS, no commercial software,
usually small noinstall freeware utilities, has always been very
troublefree.

6 weeks ago, on daily cold boot, worked fine one day, installed
nothing, don't use registry cleaners, etc.

The next day, DUN was normal, Firefox opened normally, but it was not
browsing. I disabled the firewall, no help, I checked seveal things,
everything seemed normal. I changed nothing. I went to another XP
machine, works fine on same DUN connection. I ran several AV
programs, clean results.

The next day, browsing was normal. Normal for the next few weeks, one
day, I sent an email, 5 minutes later it stopped browsing.

I went back to a month-old registry, it started browsing again.

Today it is again not browsing. I'm writing this in another computer.

I have the rollup patch of about a year ago, waiting to install it
after I backup everything.

I just read an earlier post here that says W2K is very vulnerable,
will get infected in minutes unless patched, that is not my
experience, SP4 helps with some issues, I'm sure. Careful browsing
makes a lot of difference also.

The way my machine normally works, there is nothing basic wrong, it
worked years OK.

Is there a missing patch that would account for this strange
situation, or what?

ms
Click to expand...

Thanks to all for the help

ms
 
ms said:
NSLOOKUP:
Default server:
nsi.insps.net
address: 65.247.64.21

Please see end of message.



C:\>netstat 1>c:\Ping.bak

Good news- your earlier lookup command, my ISP text file did not have
that kind of data for my ISP so I called them. The address was wrong-
they had changed awhile ago, so I stopped browsing- wonderful! They send
a monthly billing email, could have notified people.

They had me, in Internet Settings, change from a listed wrong address to
"find DNS automatically". That did it!

A few minor questions:
My other XP and W98 machines work OK, so I guess I have to check as above
in each of them, they must be set to "find DNS automatically", or they
would have stopped browsing, as all my computers have the same DUN
settings.
Click to expand...

If the XP & W9x machines are working fine then they are probably already
set to automatically find the DNS server, nowadays almost all ISPs have
their clients use automatic settings obtain IP & DNS addresses.


Where is the normal log file that keeps track of events in W2K? I just
looked in C: and don't see it.
Click to expand...

They're .evt files in the %SystemRoot%\System32\Config folder.
(%SystemRoot% is a variable for the system folder, WINNT on Windows
2000, or the same thing as %Windir%). You can't really read these files
without special tools, use the Event Viewer to view the logs.

Thanks again
Click to expand...

You're welcome, I glad to see that you got things fixed.

John
 
Huh? I have Firefox 3 and it has bookmarks. Am I misunderstanding this?
Click to expand...

I read a month ago on a ng that Fx 2 users were upset when trying Fx 3 that
the bookmarks were a different system, bookmark utilities no longer worked.
They quoted a web page but I had no time to search it.

Do you have a bookmarks.htm file in Fx 3?

ms
 
Back
Top