Asus Wi-Fi Tv tuner

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello to all,
My Asus WF Tv works for wireless, works fine for capture, when it works for
TV and radio??????
I have the last Vista driver from 03-04-2007 Vs 6.0.6000.16420 and until now
no tv no radio.
Someone have solutions???
Thanks
 
O. I have also this tuner. But it does not work.
It can not find any channels. I`am not speaking about radio :(

What drivers you install?

"Asus Tiger Hybrid TV Tuner"
<[email protected]> Ñообщил/Ñообщила в
новоÑÑ‚ÑÑ… Ñледующее:
 
Hello,

I already try a lots of drivers an nothing.
From Asus no support.
From microsoft is like you know, this card is on the support list for Vista
and nothing.
Only wireless and capture works.

I'm waiting for a good solution. Thanks
 
Not all tuners on tuner cards, especialy hybrid card, that work with Vista
also support the MC application on Vista. Some can only be used with the TV
application supplied by the Tuner card manufacturer
"Asus Tiger Hybrid TV Tuner"
 
My friend,

I already try with other programs and nothing (Asus Ezvcr, Cyberlink, etc).
Only capture works, scan tv and radio and nop.

Some help is greatfull.
 
This MO have not TvTuner onboard... it have TVTuner in box... this is just
PCI device.
Device name "ASUSTeK Tiger Cepture Device"
It woks on Windows Media Center Edition 2005 and Windows XP, but does not
work on Windows Vista.
Bun in list of compability list this tuner exist. :(
 
Ok,
That makes sense since the only card descripiton I could find covered the
Video PCI card which does not have a tuner per the following:

http://www.viperlair.com/reviews/video/asus/r4xx/ax800xl/p2.shtml

Is the Tiger device a Pal Analog/ DVB-T hybrid "card"?

The OP states he has the Vista driver for the Tiger device so I would expect
that he could at least configure it for the digital tuner in MC and get it
to work with whatever TV application came with the device.
 
It's correct Is a Tiger device Pal Analog/ DVB-T hybrid "card".

All the software (Cyberlink, Asus Ez vcr, MC, etc) detects the card but no
tv no radio after scan.
 
With the Asus application are you scaning and trying to use the analog tuner
the digital tuner or both? About how many channels showed up during the
scan?

"Asus Tiger Hybrid TV Tuner"
 
I only have analog signal, during and after scan zero channels.
Like I say before: capture video from vcr is ok; no tv channels; no radio.
 
How does your Tiger device connect to your system? If it uses S-Video or
composite to the Video capture card then how do you get the Tiger Device to
scan and change the video it is sending to the capture card?
"Asus Tiger Hybrid TV Tuner"
 
I do not understand your doubth. To capture from VCR I use the composite and
works with Vista and I change the signal with Powercinema to TV or radio, but
only composite or s-video works.
 
Ok that makes sense I think I uderstand now.
Since you signal is being tuned by the Tiger device and then converted tro
480i Video and sent to the video capture card over composite or S-video.
You can not scan the S-video or composite since it is not a tuner just a
vidio connection.. And apparently you can not get the Tiger device to scan
when it is conencted in this manner and acting like a STB and not like a
tuner.

"Asus Tiger Hybrid TV Tuner"
 
Back
Top