ASUS P4T-E and Win XP Professional 2002 Service Pack 2

  • Thread starter Thread starter Hill
  • Start date Start date
H

Hill

I need an help for my Motherboard ASUS P4T-E.
I had to reinstall Windows XP on my pc. My Matrox Marvel G450 eTV works
fine, but when I try to open the PC-VCR software, it does not start and a
window tells me that Matrox video hardware is not available at the moment,
and the hardware should be used by another program. Graphic memory could not
be enough.
The windows tells me also that I should close all the programs, and I should
reduce the resolution of the screen.
But there was no program opened, and, reducing the resolution, the situation
is the same.
On the other hand, bass and treble settings are no more available from the
audio panel.

Since everything worked fine before this second installation (now Microsoft
Windows XP Professional 2002 Version Service Pack 2) and the computer
components are the same, I think my problem is about motherboard settings.

Who can help me?
Thanx in advance!

Hill
 
I need an help for my Motherboard ASUS P4T-E.
I had to reinstall Windows XP on my pc. My Matrox Marvel G450 eTV
works fine, but when I try to open the PC-VCR software, it does
not start and a window tells me that Matrox video hardware is not
available at the moment, and the hardware should be used by another
program. Graphic memory could not be enough.

The windows tells me also that I should close all the programs, and
I should reduce the resolution of the screen.But there was no program
opened, and, reducing the resolution, the situation is the same.
On the other hand, bass and treble settings are no more available
from the audio panel.

Since everything worked fine before this second installation (now
Microsoft Windows XP Professional 2002 Version Service Pack 2) and
the computer components are the same, I think my problem is about
motherboard settings.

Who can help me?
Thanx in advance!

Hill

The driver here looks pretty old. The 5.82.018 driver might well
have been released for the original version of WinXP.

http://www.matrox.com/mga/support/drivers/latest/home.cfm
http://www.matrox.com/mga/support/drivers/files/vt210a.cfm

There is one patch for PC-VCR at the top of this page. If your
processor runs faster than 2.4GHz, you might install this.

http://www.matrox.com/mga/support/drivers/files/ftp_util2.cfm

The best place to resolve these issues, is on the Matrox official
support site.

http://forum.matrox.com/mga/viewtopic.php?t=16084&highlight=g450+etv

It seems you have already posted here (as "Fabri"). Good luck.
http://forum.matrox.com/mga/viewforum.php?f=11

Matrox support staff operate the forum during office hours
in Montreal, Quebec, Canada. And, as you question has been asked
a number of times, they may not be in a rush to answer it.
I would try the original WinXP or use WinXP SP1.

Paul
 
Back
Top