asus firmware dvd 0402p

  • Thread starter Thread starter JR
  • Start date Start date
J

JR

Hello,
Please I need your help I can write dvd-r movies, sometime is failure I use
princo dvd-r and lead data dvd-r,the best thing is to change firmware and
flash with pioneer a05, but I dont konw hwo to do and where I down load the
softs?.
Thans a lot.

(e-mail address removed)
 
I try that and wend I start I have windows dos who is write "aviable target
is not found"
Could please help me a gain.
thank a lot.
 
My asus dvd burn is model 0402p and wned I burn dvd movies they are not
burning very well, some vob extension are corrupt tha the reason i would
like to flash my firmware by pioneer a05.Pioneer A05 is beter than asus
0402p.
thanks and bye
 
The latest firmware for your DVD-RW is 1.30 available from ASUS at
http://www.asus.com.tw/support/download/item.aspx?ModelName=DRW-0402P
If this is not what you're looking for and you are sure the latest firmware
for a Pioneer A05 is correct for your drive, there are a few of things you
can try.
*If the jumper for the drive is on 'cable select', make it a master - then
test if the program finds the burner.

* Are you sure the princo media are compatible with the drive. Test other
makes ie.. TDK, Verbatim, Imation.
I've never had a problem with TDK's...

Good luck
JT
 
JR wrote:
[top posting fixed]
My asus dvd burn is model 0402p and wned I burn dvd movies they are
not burning very well, some vob extension are corrupt tha the reason
i would like to flash my firmware by pioneer a05.Pioneer A05 is beter
than asus 0402p.
Click to expand...

Put the drive on the end of the IDE chain (remember to set the jumper to
Cable select or Master) and pull the plug on any other CD/DVD drives
that are on the same channel. Enter the BIOS and restrict the drive to
PIO mode 4, do the same in Intel Application Accelerator, if you have
that installed. Disable any virtual drives, ie Nero Image Drive, Daemon
Tools or whatever, if applicable. Also, you might have to run the
firmware upgrader in windows 98 compatibility mode if you're running
Windows XP. Then run the flash tool and upgrade the firmware.

-Sune
 
Back
Top