Bill Pelka said:
Greetings,
I have installed 2 GIG into the Digimatrix.
I have 2 -1 Gig DDRAM ADATA 128Mx64 DDR333.
I would like to utilize Hyper-Threading with this unit.
My CPU is a Pentium 4 2.8GHz.
How do I turn on the Hyper-Threading?
Thanks,
Bill Pelka
If you go to this page, and click SIS651 plus one other
chipset, Hyperthreading is listed as "N/A" on the
SIS651.
http://www.sis.com/support/support_compare.htm
I don't think any of the processors in the supported processor
list has Hyperthreading. The Prescott processors probably do,
but the processors in the list below look to be Northwood 0.13u,
judging by the size of the cache listed. (90nm core processors
have 256KB and 1MB caches, compared to the ones below.) Only
the 3.06/FSB533/512KB 0.13u Northwood had Hyperthreadihg, and
it isn't listed below.
http://support.asus.com.tw/cpusupport/cpusupport.aspx?SLanguage=en-us
Celeron 2.0 GHz (400 FSB, L2 cache:128KB)
Celeron 2.1 GHz (400 FSB, L2 cache:128KB)
Celeron 2.2 GHz (400 FSB, L2 cache:128KB)
Celeron 2.3 GHz (400 FSB, L2 cache:128KB)
Celeron 2.4 GHz (400 FSB, L2 cache:128KB)
Celeron 2.5 GHz (400 FSB, L2 cache:128KB)
Celeron 2.6 GHz (400 FSB, L2 cache:128KB)
P4-1.6A GHz (Socket478, 400 FSB, L2 cache:512KB)
P4-1.8A GHz (Socket478, 400 FSB, L2 cache:512KB)
P4-2.20 GHz (400 FSB, L2 cache:512KB)
P4-2.26 GHz (533 FSB, L2 cache:512KB)
P4-2.40 GHz (400 FSB, L2 cache:512KB)
P4-2.40B GHz (533 FSB, L2 cache:512KB)
P4-2.50 GHz (400 FSB, L2 cache:512KB)
P4-2.53 GHz (533 FSB, L2 cache:512KB)
P4-2.60 GHz (400 FSB, L2 cache:512KB)
P4-2.66 GHz (533 FSB, L2 cache:512KB)
P4-2A GHz (Socket478, 400 FSB, L2 cache:512KB)
You can look up your processor using the SLxxx code here.
Intel is pretty sloppy about documenting feature set on this
site, so don't expect an easy answer.
http://processorfinder.intel.com
HTH,
Paul
