Asus A7V600-x Motherboard will not power up after installed. Help please

  • Thread starter Thread starter dinodawg01
  • Start date Start date
D

dinodawg01

After installing the board, into my old system, the computer will not
start up. I am using all my old hardware, ( hard drive, graphics card,
Processor) I have gone over all connections and they are hooked up as
per the manual. But it will not start up. The green light on the
motherboard is showing that I have power, but that is it. Has anyone
ran into this problem before?
 
try resetting the CMOS..and make sure the Cpu and heatsink are installed
correctly..what are the LED's on the plate showing?
 
dinodawg said:
After installing the board, into my old system, the computer will not
start up. I am using all my old hardware, ( hard drive, graphics card,
Processor) I have gone over all connections and they are hooked up as
per the manual. But it will not start up. The green light on the
motherboard is showing that I have power, but that is it. Has anyone
ran into this problem before?
Click to expand...



Could be a whole bunch of things. Are you sure the back of the motherboard
isn't shorting to the case ?
Do you get a single POST beep ?
If you don't get a POST beep, remove all PCI cards, all harddrives and
optical drives. Leave only the CPU w/heatsink, one RAM module, and the
videocard. Will it boot ?
 
Back
Top