Asus a7v600 freshes in upstart

  • Thread starter Thread starter Brian Knudsen
  • Start date Start date
B

Brian Knudsen

Hi all



I have a Asus A7V600 motherboard.. my problem is when ever i restart
my computer it stop working in the startup where it counts the
memory.. And about 5 min. later it countinous.. Does anyone know what
could be wrong.. coz. i can find out the problem.. i triespulling on
memory out.. with same results.. Hope that someone can help me..



My Computer:


Asus A7V600
AMD athlon xp 2800+(Barton)
768 mb ram 1. 256 Samsung pc400 ram 2. 512 Samsung pc400 ram
13 GB Quantum Fireball IDE
30 GB IBM - DTLA-307030 IDE
60 GB Seagate ST380021A IDE
Liteon dvdrw LDW-411S
160 GB Maxtor 6 Y160M0 Serial ATA
Radeon 9600 8x agp
NorthQ 400W Psu


Brian Knudsen

BRUTAL - Now your playing with power
 
Brian Knudsen" <brian.knudsen"fjerndette mumbled his insignificant opinion
in:
(e-mail address removed)

Hej Brian
I have a Asus A7V600 motherboard.. my problem is when ever i restart
my computer it stop working in the startup where it counts the
memory.. And about 5 min. later it countinous.. Does anyone know what
could be wrong.. coz. i can find out the problem.. i triespulling on
memory out.. with same results.. Hope that someone can help me..
Click to expand...

Its very likely the bios is waiting for a device to respond, have you
added/enabled or removed any pci cards, onboard devices, or
harddrives/cdroms lately?

Go into bios and check if you havent enabled a device thats not present. My
guess is that its probing the IDE, try set non existing devices to NONE
instead of AUTO or USER. Like if you only have a harddrive (master) and
cdrom (slave) on primary channel, disable both devices on the secondary.

It would help to pinpoint the problem, if you told us what happens after the
5 minutes break, does it come up with a list of ide drives, irq's or what is
it waiting for ? I assume it halts right AFTER the memory check.
 
Its very likely the bios is waiting for a device to respond, have you
added/enabled or removed any pci cards, onboard devices, or
harddrives/cdroms lately?
No

Go into bios and check if you havent enabled a device thats not present. My
guess is that its probing the IDE, try set non existing devices to NONE
instead of AUTO or USER. Like if you only have a harddrive (master) and
cdrom (slave) on primary channel, disable both devices on the secondary.
Click to expand...
i will check
It would help to pinpoint the problem, if you told us what happens after the
5 minutes break, does it come up with a list of ide drives, irq's or what is
it waiting for ? I assume it halts right AFTER the memory check.
Click to expand...

No it halts before it does the memory check. After the 5 minut
break is list the device with irq and all that and goes in windows.. I
don't know what it's looking for..
Brian Knudsen

BRUTAL - Now your playing with power
 
Brian Knudsen said:
i will check


No it halts before it does the memory check. After the 5 minut
break is list the device with irq and all that and goes in windows.. I
don't know what it's looking for..
Click to expand...

On next boot-up, re-set the BIOS to setup defaults and see if that helps.
Sune has the right idea-- BIOS is looking for a device that isn't there or
is trying to run an incorrect setting.
 
On next boot-up, re-set the BIOS to setup defaults and see if that helps.
Sune has the right idea-- BIOS is looking for a device that isn't there or
is trying to run an incorrect setting.
Click to expand...


Okay.. i will try that.. i hope it will work

Brian Knudsen

BRUTAL - Now your playing with power
 
Okay.. i will try that.. i hope it will work

Brian Knudsen

BRUTAL - Now your playing with power
Click to expand...


That didn't help.... it's still freshing
Brian Knudsen

BRUTAL - Now your playing with power
 
Back
Top