Asus A7V what?

  • Thread starter Thread starter DaveJr
  • Start date Start date
D

DaveJr

Hello group.

I have an Asus A7V motherboard with "rev. 1.02" labeled on it. I need to
know EXACTLY which A7V this board is. The bios was improperly flashed and
I'm replacing the chip entirely, with the correct bios version. Apparently
there is some confusion with the A7V133 board. My "rev. 1.02" does have the
Promise chip like the A7V133 does.

I need to know EXACTLY which bios version needs to be put on it.
 
At least my A7V133-C has it printed on the mobo (and ver. 1.05. ) so if
your says only A7V , it is A7V , the original in that series..


--
Tumppi
Reply to group
=================================================
Most learned on nntp://news.mircosoft.com
Helsinki, Finland (remove _NOSPAM)
(translations from FI/SE not always accurate)
=================================================
 
DaveJr said:
Hello group.

I have an Asus A7V motherboard with "rev. 1.02" labeled on it. I need to
know EXACTLY which A7V this board is. The bios was improperly flashed and
I'm replacing the chip entirely, with the correct bios version.
Apparently
there is some confusion with the A7V133 board. My "rev. 1.02" does have
the
Promise chip like the A7V133 does.

I need to know EXACTLY which bios version needs to be put on it.
Your MB is the classic A7V, I have the ver 1.01..I believe I did get a
Athlon XP 2100+ to run....the bio's showed it as a Duron. You need VERY good
cooling!!! I sold the Athlon XP 2100 and now running a Thunderbird 1.2
ghz...again good cooling!!
This site helped me allot: http://www.a7vtroubleshooting.com/

Good Luck
 
Your MB is the classic A7V, I have the ver 1.01..I believe I did get a
Athlon XP 2100+ to run....the bio's showed it as a Duron. You need VERY good
cooling!!! I sold the Athlon XP 2100 and now running a Thunderbird 1.2
ghz...again good cooling!!
This site helped me allot: http://www.a7vtroubleshooting.com/

Good Luck

Thanx for the tip. It's going in an Antec 1030B full tower with an Athlon
950. The Antec case does have two intake fans, two exhaust fans, and two
in the power supply. The cpu heatsink/fan is 'factory' AMD aluminum style.
I don't plan on overclocking.
 
DaveJr said:
Thanx for the tip. It's going in an Antec 1030B full tower with an
Athlon
950. The Antec case does have two intake fans, two exhaust fans, and two
in the power supply. The cpu heatsink/fan is 'factory' AMD aluminum
style.
I don't plan on overclocking.
more here
http://www.conram.com/
 
Yep sounds like the A7V classic to me, make sure you run the latest
beta bios.

-GV
 
ASUS A7V Motherboard Specifications
CPUs Supported Socket A, currently 550MHz-1 GHz+ (compatible with AMD
Duron/Thunderbird series)
Chipset VIA VT8363 (KT-133) Northbridge
VIA 82C686A Southbridge and I/O Controller
Bus Speeds 100-133MHz in 1MHz increments (200-266MHz effective rate)
CPU voltage settings Voltage Autodetect
Manually adjustable to 1.60-2.10v (.05v increments), 2.20v, 2.30v
Formula used: -.4v to +.1v (.05 increments) and +.2v and +.3v
BIOS 2Mbit Award BIOS (Full ACPI, DMI, PnP, Trend ChipAway Boot Virus
Protect)
Form Factor ATX, 24.5 cm x 30.5 cm.
Overclocking Rev 1.02 (no audio) supports CPU multiplier adjustment
(will not help with factory locked CPU)
Voltage control in .05v increments
System Memory 3 168 Pin SDRAM DIMMs, Maximum 1.5GB
PC100, PC133, and PC133 VCM (Virtual Channel)
Expansion Slots 1 AGP Pro AGP 4x
5 PCI v2.2
1 Audio/Modem Riser (shared with PCI slot)
IDE Support 2 Ultra DMA/100, Promise PDC20265 EIDE Controller
2 Ultra DMA/66, VIA Southbridge EIDE Controller
Sound Support AC '97 Compliant 2D Audio Controller (optional)
Crystal 4299 Audio Codec
Ports 2 USB v1.1 standard, with support for 5 more
1 Parallel, ECP and EPP supported
2 Serial, max 115,200bps FIFO
1 PS/2 Keyboard
1 PS/2 Mouse
1 Game/Midi/Audio Riser (optional)
PC Monitoring CPU and Motherboard temperature detection
Fan speed detection
Voltage detection
Boot Options IDE HDD (Promise and VIA Controllers)
CD-ROM (VIA Controller Only)
Floppy Drive
SCSI
ZIP/LS-120
 
Back
Top