Asus A7N8X Deluxe Rev2 - Sound Issue

  • Thread starter Thread starter thecalman
  • Start date Start date
T

thecalman

Any ideas?

I've been using the front panel connections on the m/b for about 8
months. I decided to go back to using the rear connections. I removed
front panel connections from the m/b and then found out the rear
connections no longer work. When I reconnect to the front panel pins
on the m/b I get sound.

Anyone have any idea how I can get my rear connections to work again?

thecalman
 
thecalman said:
Any ideas?

I've been using the front panel connections on the m/b for about 8
months. I decided to go back to using the rear connections. I removed
front panel connections from the m/b and then found out the rear
connections no longer work. When I reconnect to the front panel pins
on the m/b I get sound.

Anyone have any idea how I can get my rear connections to work again?

thecalman
Click to expand...

After removing the front connectors from
the MB header, are you reinstalling the
jumpers in between the 2 channels Line
and B_Line pins? They are needed to pipe
the signal to the rear jacks.HTH.
Rob
 
Any ideas?

I've been using the front panel connections on the m/b for about 8
months. I decided to go back to using the rear connections. I removed
front panel connections from the m/b and then found out the rear
connections no longer work. When I reconnect to the front panel pins
on the m/b I get sound.

Anyone have any idea how I can get my rear connections to work again?

thecalman
Click to expand...

see FP_AUDIO in A7N8X manual.
Check that you have two jumpers on the FP_AUDIO header.

eD
 
thecalman said:
Any ideas?

I've been using the front panel connections on the m/b for about 8
months. I decided to go back to using the rear connections. I removed
front panel connections from the m/b and then found out the rear
connections no longer work. When I reconnect to the front panel pins
on the m/b I get sound.

Anyone have any idea how I can get my rear connections to work again?

thecalman
Click to expand...

When you remove the front panel wiring, you are supposed to put two
jumper plugs back on the header. Only the manual for the A7N8X-E
shows the jumper plugs - see page 46 of:

ftp://ftp.asus.com.tw/pub/ASUS/mb/socka/nforce2/a7n8x-e/e1322_a7n8x-e_deluxe.pdf

HTH,
Paul
 
Back
Top