Applying Theme suddenly takes so much longer than it used to

  • Thread starter Thread starter Atreju
  • Start date Start date
A

Atreju

Hello all,

Recently (only in the past couple of weeks) applying a new theme /
style to my XP has begun to take about 15 seconds. It used to take
around 2-4 seconds.

I have a Pentium 4 3 GHz w/ Hyperthreading. 1 GB RAM.
This is supposed to work like lightning.

Any thoughts?

Is it possible one specific theme I have installed has somehow screwed
things up?


---Atreju---
 
Well, that is the first question, does this happen with the default XP
themes or only third party themes you've installed from other sources. If
it's only third party themes, you may not have screwed up, it may simply be
an issue with the themes. When it worked in 2 to 4 seconds, was it working
with these themes? When it worked in 2 to 4 seconds, how much was open? If
your graphics card shares memory with main system memory as opposed to
having its own memory, that could be the issue and is a choke point for your
entire setup.

If it is in fact sharing memory, you should look into a card with it's own
memory. I can't say whether or not it would resolve this issue and some may
depend upon how much memory the card has it really doesn't matter how much
system memory you have and the power of the processor, even with
hyperthreading, if the graphics card is sharing memory (Yes, even on systems
such as this we see such things) you are using a 400 horsepower sportscar to
pull the car and a 5000 pound trailer.

If you don't know about the graphics card, you may have to check your
system's documentation or the manufacturer's website or tech support.
 
Comments inline...

Well, that is the first question, does this happen with the default XP
themes or only third party themes you've installed from other sources. If
it's only third party themes, you may not have screwed up, it may simply be
an issue with the themes. When it worked in 2 to 4 seconds, was it working
with these themes?
Click to expand...

It worked in a very short period of time even with custom themes, even
the ones I am using now. I am using other ones as well, but even the
ones that worked fast are now slower to apply.
When it worked in 2 to 4 seconds, how much was open? If
your graphics card shares memory with main system memory as opposed to
having its own memory, that could be the issue and is a choke point for your
entire setup.
Click to expand...

I've got an ATI RADEON 9600 XT, so, um... no graphics card problem
there ;-)

I think even applying the Windows XP default theme does it.

The one thing I remember being weird was at one time I installed a new
theme that coincidentally had the same Title embedded within it as one
I was already using. I renamed the msstyles file, but the title is
apparently embedded inside. Therefore, I could not actually add that
theme because all Windows saw in the list was the existing one.

What I tried was to right-click on that new theme msstyles file and
select "Open" which applied it into the current scheme.
I have since deleted that theme because I didn't like it very much,
but perhaps there's still something 'stuck' somehow. I removed the
entire folder including the msstyles file for that theme, and I still
have the old one. But I'm not only using the old one.

I don't really think this incident was the catalyst for the problems.
Perhaps something else I am running is interfering without my being
aware of it.

I have looked through my registry and startup and services... nothing
looks fishy.

Any other thoughts?

Thanks for your help.

-SNIP-


---Atreju---
 
First, be sure your antivirus software has the latest definitions and run a
virus scan.

Second, download, install and run Ad Aware:
www.lavasoftusa.com

If this is a relatively recent issue, you might try using System Restore to
take you back to a time when this worked properly. Start\All
Programs\Accessories\System Tools\System Restore. If that doesn't resolve
it, try the information below.

The following assumes you have an actual XP CD as opposed to a restore CD or
restore partition supplied by your PC manufacturer.

Go to Start, type sfc /scannow in the run box and press enter. Note, there
is a space between sfc and the forward slash. You will be asked for your XP
CD. Be aware, upon inserting the CD the XP setup screen may appear, this is
not a part of sfc /scannow, rather it is being invoked by autorun. Simply
minimize the screen and allow sfc to continue.

If the above fails to resolve the issue, try a repair install as follows:

Be sure you are well backed up in case there is a problem from which you are
unable to recover. NOTE, while a repair install should leave your data
files intact, if something goes wrong during the repair install, you may be
forced to start over and do a clean install of XP. If you don't have your
data backed up, you would lose your data should that eventuality occur.

Assuming your system is set to boot from the CD-ROM drive, boot with the XP
CD in the drive. If it isn't or you are not sure, you need to enter the
system's BIOS. When you boot the system, the first screen usually has
instructions that if you wish to enter setup press a specific key, when you
see that, do so. Then you will have to navigate to the boot sequence, if
the CD-ROM drive is not first line, set it first in the boot sequence. Save
your settings and exit with the XP CD in the drive. The system will reboot.

Boot from the CD. If your system is set to be able to boot from the CD, it
should detect the disk and give a brief message, during the boot up, if you
wish to boot from the CD press any key.
 
Thanks for the advice.
As for Adaware, I have it, so I'll run it to see if anything new pops
up.

No way am I running a system restore, sorry. But thanks for the input.

First, be sure your antivirus software has the latest definitions and run a
virus scan.

Second, download, install and run Ad Aware:
www.lavasoftusa.com

If this is a relatively recent issue, you might try using System Restore to
take you back to a time when this worked properly. Start\All
Programs\Accessories\System Tools\System Restore. If that doesn't resolve
it, try the information below.

The following assumes you have an actual XP CD as opposed to a restore CD or
restore partition supplied by your PC manufacturer.

Go to Start, type sfc /scannow in the run box and press enter. Note, there
is a space between sfc and the forward slash. You will be asked for your XP
CD. Be aware, upon inserting the CD the XP setup screen may appear, this is
not a part of sfc /scannow, rather it is being invoked by autorun. Simply
minimize the screen and allow sfc to continue.

If the above fails to resolve the issue, try a repair install as follows:

Be sure you are well backed up in case there is a problem from which you are
unable to recover. NOTE, while a repair install should leave your data
files intact, if something goes wrong during the repair install, you may be
forced to start over and do a clean install of XP. If you don't have your
data backed up, you would lose your data should that eventuality occur.

Assuming your system is set to boot from the CD-ROM drive, boot with the XP
CD in the drive. If it isn't or you are not sure, you need to enter the
system's BIOS. When you boot the system, the first screen usually has
instructions that if you wish to enter setup press a specific key, when you
see that, do so. Then you will have to navigate to the boot sequence, if
the CD-ROM drive is not first line, set it first in the boot sequence. Save
your settings and exit with the XP CD in the drive. The system will reboot.

Boot from the CD. If your system is set to be able to boot from the CD, it
should detect the disk and give a brief message, during the boot up, if you
wish to boot from the CD press any key.
Click to expand...



---Atreju---
 
I offered other options besides System Restore but what is your objection to
it?
 
I offered other options besides System Restore but what is your objection to
it?
Click to expand...

Doesn't system restore put back the OS the way it is on a fresh
install?

I have too much installed and configured to start doing that now. I
don't have the time for it.

One of these days I suppose I can do a re-install of the OS and put
everything on again, but since I only have had the system for a few
months, I really don't think that should be necessary. Nothing has
gone that wrong... yet.


---Atreju---
 
I offered other options besides System Restore but what is your objection to
it?
Click to expand...

Well, it turns out I did the restore of dlls using sfc and after that,
I re-did the software to use the custom styles and everything seems
back to normal now.


---Atreju---
 
I see you've got things working again but to clear up confusion about System
Restore and I'm not talking about a manufacturer's recovery routine or
recovery CD I'm talking about XP's System Restore that functions as
something of a mini "GoBack" applet except it only restores the System State
to what it was at a given restore point. In other words, registry and
system settings and only to the specified point. Start\All
Programs\Accessories\System Tools\System Restore, it is also offered as your
first option when entering Safe Mode, boot the system, start tapping F8,
select Safe Mode at the menu and press enter.

If System Restore did as you thought, I would have warned you up front
though you had no way of knowing that. I asked the question about your
objections to it because from your initial response, I thought you might
have the impression you had and I wanted to clear it up. While System
Restore should never be relied upon as an alternative to a backup, it is a
good first line of defense that can save a user a lot of time and effort.
 
Back
Top