Any Brave Soul Willing to help me get Win-XP PRO (SP2 included) installed on a A7N8X-E Deluxe??

  • Thread starter Thread starter G.L. Cross
  • Start date Start date
G

G.L. Cross

HELP PLEASE,

I've tried about everything I can think of but the install program copies
files to about 75% - 85% and then starts claiming
that it cannot read such and such a file. Interestingly these files are in
alphabetical order usually starting somewhere around
the "n" to "p" range...

I kind of have a feeling that it may be something to do with the fact that I
want to boot from the Silicon Image RAID controller
which has two 250GB drives configured in a striped set. Programs like
Partition Magic are able to handle this enormous drive
correctly (although no single partition exceeds about 150GB).

I've also tried installing earlier versions of Win-XP PRO (like SP1a, and
SP1); they all exhibit the same bizarre symptoms. And yes,
I am using (F6) to install the latest driver from the ASUS site: "SiI3x 12A
SATA RAID driver" version 1.0.0.50; in addition I've
also tried the driver from the support disk (version 1.0.0.32) as well as
the one from Silicon Image's website (version 1.0.0.51).
The board has the latest BIOS and I've got it configured for the "SAFE
SETTINGS" as opposed to the "PERFORMANCE
SETTINGS."

Also helpful would be if anyone has some diagnostic programs that may
uncover memory timing problems, bus deadlock, or other
nasties (once the install disk claims it cannot read certain files, I
noticed that the activity light does not come on again indicating that
it does not even try to re-read the file.


Thanks in advance,

- Gordon


*** To e-mail me, please remove the "NOSPAM." and "666" from the reply
address ***
 
alt.comp.periphs.mainboard.asus:

Also helpful would be if anyone has some diagnostic programs that may
uncover memory timing problems, bus deadlock, or other
nasties (once the install disk claims it cannot read certain files, I
noticed that the activity light does not come on again indicating that
it does not even try to re-read the file.
Click to expand...


I have encountered the same problems once and it was a defect memory
module.

http://www.simmtester.com/PAGE/products/doc/docinfo.asp

is a free software tester used from a self-bootable floppy. Maybe give
it a try.

--
CeeBee


"I don't know half of you
half as well as I should like;
and I like less than half of you
half as well as you deserve."
 
G.L. Cross said:
HELP PLEASE,

I've tried about everything I can think of but the install program copies
files to about 75% - 85% and then starts claiming
that it cannot read such and such a file. Interestingly these files are in
alphabetical order usually starting somewhere around
the "n" to "p" range...

I kind of have a feeling that it may be something to do with the fact that I
want to boot from the Silicon Image RAID controller
which has two 250GB drives configured in a striped set. Programs like
Partition Magic are able to handle this enormous drive
correctly (although no single partition exceeds about 150GB).

I've also tried installing earlier versions of Win-XP PRO (like SP1a, and
SP1); they all exhibit the same bizarre symptoms. And yes,
I am using (F6) to install the latest driver from the ASUS site: "SiI3x 12A
SATA RAID driver" version 1.0.0.50; in addition I've
also tried the driver from the support disk (version 1.0.0.32) as well as
the one from Silicon Image's website (version 1.0.0.51).
The board has the latest BIOS and I've got it configured for the "SAFE
SETTINGS" as opposed to the "PERFORMANCE
SETTINGS."
Click to expand...

Have you tried copying the CD to a hard drive and installing from there?
That is what Microsoft told me to do when I had a similar problem
installing Windows XP when it first came out.
 
G.L. Cross said:
HELP PLEASE,

I've tried about everything I can think of but the install program
copies files to about 75% - 85% and then starts claiming
that it cannot read such and such a file. Interestingly these files
are in alphabetical order usually starting somewhere around
the "n" to "p" range...

I kind of have a feeling that it may be something to do with the fact
that I want to boot from the Silicon Image RAID controller
which has two 250GB drives configured in a striped set. Programs like
Partition Magic are able to handle this enormous drive
correctly (although no single partition exceeds about 150GB).

I've also tried installing earlier versions of Win-XP PRO (like SP1a,
and SP1); they all exhibit the same bizarre symptoms. And yes,
I am using (F6) to install the latest driver from the ASUS site:
"SiI3x 12A SATA RAID driver" version 1.0.0.50; in addition I've
also tried the driver from the support disk (version 1.0.0.32) as
well as the one from Silicon Image's website (version 1.0.0.51).
The board has the latest BIOS and I've got it configured for the "SAFE
SETTINGS" as opposed to the "PERFORMANCE
SETTINGS."

Also helpful would be if anyone has some diagnostic programs that may
uncover memory timing problems, bus deadlock, or other
nasties (once the install disk claims it cannot read certain files, I
noticed that the activity light does not come on again indicating that
it does not even try to re-read the file.


Thanks in advance,

- Gordon


*** To e-mail me, please remove the "NOSPAM." and "666" from the reply
address ***
Click to expand...

Like has already been said it may be a memory problem as i've had the same
kind of thing before.
To get round it underclock your system in the bios and install it,if it does
install ok then you probably have a dodgy stick of ram.
 
John said:
Like has already been said it may be a memory problem as i've had the same
kind of thing before.
To get round it underclock your system in the bios and install it,if it does
install ok then you probably have a dodgy stick of ram.
Click to expand...

Yep, I also had the same problem which was also bad stick of DDR.
Another free (and excellent) memory tester which runs from a boot
floppy is here:
http://www.memtest86.com/
Leave it running for a few hours to be sure. Test #5 is usually the
one that detects problems which the POST test misses.
HTH
 
Add me to the "Bad Memory" list.

I tried two different flavors of Crucial ram and neither would run in
the dual channel configuration. I put the dimms in the slots that did
not support dual channel, and have been running fine ever since.

Using Prime 95 as a benchmark, it looks like you loose less
performance by choosing the "not dual channel" than if you lower the
bus speed.

Frank
 
G.L. Cross said:
HELP PLEASE,

I've tried about everything I can think of but the install program copies
files to about 75% - 85% and then starts claiming
that it cannot read such and such a file. Interestingly these files are in
alphabetical order usually starting somewhere around
the "n" to "p" range...

I kind of have a feeling that it may be something to do with the fact that I
want to boot from the Silicon Image RAID controller
which has two 250GB drives configured in a striped set. Programs like
Partition Magic are able to handle this enormous drive
correctly (although no single partition exceeds about 150GB).

I've also tried installing earlier versions of Win-XP PRO (like SP1a, and
SP1); they all exhibit the same bizarre symptoms. And yes,
I am using (F6) to install the latest driver from the ASUS site: "SiI3x 12A
SATA RAID driver" version 1.0.0.50; in addition I've
also tried the driver from the support disk (version 1.0.0.32) as well as
the one from Silicon Image's website (version 1.0.0.51).
The board has the latest BIOS and I've got it configured for the "SAFE
SETTINGS" as opposed to the "PERFORMANCE
SETTINGS."

Also helpful would be if anyone has some diagnostic programs that may
uncover memory timing problems, bus deadlock, or other
nasties (once the install disk claims it cannot read certain files, I
noticed that the activity light does not come on again indicating that
it does not even try to re-read the file.


Thanks in advance,

- Gordon


*** To e-mail me, please remove the "NOSPAM." and "666" from the reply
address ***
Click to expand...


Try disabling caching in CMOS
 
When you ask a question like this you get some really strange answers. The
correct answer is that there is something wrong with your RAM.
 
Randy said:
Try disabling caching in CMOS
Click to expand...

That will indeed solve the problem, since both the hardware and OS will
be obsolete well before the installation fails ;-)
 
Are you overclocking your system at all?

I had this problem when installing Win2000. I had forgotten that I was
overclockking my FSB. Turned back to default FSB and installed fine.

Matt
 
Triffid said:
That will indeed solve the problem, since both the hardware and OS will
be obsolete well before the installation fails ;-)
Click to expand...

Re-enable after installation. ;-}
 
Back
Top