Another sufferer: Can't change DPI from "custom setting"

  • Thread starter Thread starter Yabbie
  • Start date Start date
Y

Yabbie

Yes, I know there are other posts similar to mine, but I wanted to make my
voice heard too.

I have created a basic windows runtime with the explorer shell. My
application is part of the runtime too. On normal xp systems it runs at
800x600 no matter what the screen res is set to, but under xpe the app is
really big and goes off the screen. From reading other posts it seems the
problem could be the fact that the dpi is set incorrectly. On the image, if
I go to display addapers in the control pannel and look at the dpi settings
it is set to "Custom setting" and cannot be changed. The VC in the system
is an ATI RAGE mobility. I have included EVERY font available in xpe and
still no change.

Andy, if you can hear me, I really need your help!
 
Another Sufferrer and my Same answer .All attempts did not
trigger.Ultimately the Radeon 7500 series came as a rescue.It solved
mine but my client was gracious enough to allow the new graphics card
to be used.

Regards
Kesavan
 
My resources to troubleshoot stuff is really low at the moment, but I'll
look at it this weekend, I promise. What I need from you is to reply to the
mail by attaching the TD Build Log and the FBALog.txt to the reply. Please
do not copy and paste them into the mail, it's too difficult to read that
way. These need to be the logs for the runtime you are having problems with.

Thank you.
Andy
 
Back
Top