another MX record need for this???

  • Thread starter Thread starter _M_
  • Start date Start date
M

_M_

W2k AD domain set up.
Just recently installed a new E2k3 server into an existing E2k org. E2k is
listed as the master and the E2k3 is listed as a member. Both are standard
editions. I can receive mail but not send it. I move 1 mailbox, mine, but
i can not send mail. Receives just fine.

What did I miss ????
Do I need to add another MX record to send mail???
I get an error from the system admin saying unable to relay. Overall goal
is to move all mailboxes to new server and remove the E2k server in it
entirety.
If I change the E2k3 server to master will that work ???
Open up relaying on the E2k server (heaven forbid) ???
Is it the MX record in the internal DNS server, because OWA does not work on
new server either...

TIA
 
This is an interesting error. It, however, very likely does not have
anything to do with DNS or MX. You need to have the Exchange NewsGroup
people help you with this.

Since you mentioned master/member, I take it that both servers are in the
same RG. Look at the connectors you have defined in that RG and see if you
are limiting access to only the E3K server. Without more info regarding your
config, it's hard to make an informed recommendation.

--
Sincerely,

Dèjì Akómöláfé, MCSE MCSA MCP+I
www.akomolafe.com
www.iyaburo.com
Do you now realize that Today is the Tomorrow you were worried about
Yesterday? -anon
 
In
_M_ said:
W2k AD domain set up.
Just recently installed a new E2k3 server into an existing E2k org.
E2k is listed as the master and the E2k3 is listed as a member. Both
are standard editions. I can receive mail but not send it. I move
1 mailbox, mine, but i can not send mail. Receives just fine.

What did I miss ????
Do I need to add another MX record to send mail???
I get an error from the system admin saying unable to relay. Overall
goal is to move all mailboxes to new server and remove the E2k server
in it entirety.
If I change the E2k3 server to master will that work ???
Open up relaying on the E2k server (heaven forbid) ???
Is it the MX record in the internal DNS server, because OWA does not
work on new server either...

TIA
Click to expand...

Actually this is more of an Exchange question.

Who are you trying to send mail to, a recipient internally or externally?

MX records are for stipulating what server receives mail for a domain, not
for sending.

The Master and Member settings are for Routing Group members. That wouldn't
have anything to do with what you're trying. The RG Master updates link
state info to the Members in a Routing Group. That's pretty much it.

What other errors are you getting, check your Event log? Have you enabled
Message Tracking and run a test to see where it's getting stuck? You can
also enable diagnostic logging in the Exchange server properties in the ESM.
They will report to the Event viewer.


--
Regards,
Ace

Please direct all replies to the newsgroup so all can benefit.
This posting is provided "AS-IS" with no warranties and confers no
rights.

Ace Fekay, MCSE 2000, MCSE+I, MCSA, MCT, MVP
Microsoft Windows MVP - Active Directory

HAM AND EGGS: A day's work for a chicken; A lifetime commitment for a
pig. --
=================================
 
Back
Top