A
Addy
Hi ,
after flashing the BIOS of my K8V to Rev. 1003, which I hoped would solve my
problems with getting CnQ to work, actually made my problems worse. Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to work as
the PC runs day and night and electricity isn´t as cheap as it used to be.
But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT seems
to be linked to bad RAM or bad driver behaviour.
Anybody had the same problem ?
Addy
My AMD64-PC
Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon 9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.
after flashing the BIOS of my K8V to Rev. 1003, which I hoped would solve my
problems with getting CnQ to work, actually made my problems worse. Without
CnQ, using QFan the MoBo runs quite well, but I´d like to get CnQ to work as
the PC runs day and night and electricity isn´t as cheap as it used to be.
But to the problem. When I switch on CnQ in the bios (and do all other
things required in the manual) my pc starts up and shows a BSOD saying
PFN_LIST_CORRUPT. If I turn CnQ off, there is no such problem. When I start
up WinXP in safe mode, there is no BSOD either. The PFN_LIST_CORRUPT seems
to be linked to bad RAM or bad driver behaviour.
Anybody had the same problem ?
Addy
My AMD64-PC
Asus K8V SE Deluxe, Athlon64 3200, 2x512MB Infineon DDR 400, Radeon 9600XT
ultimate, 1x160 GB Samsung SATA, Benq 822A DVDR.