alot of problems on my pc

  • Thread starter Thread starter Mwahs
  • Start date Start date
M

Mwahs

i have a 2800+ amd barton with
the K7N2 delta series L motherboard,
nvidia nforce 2 chipset,
512k ddr ram ddr 400 pc3200 and
a geforce fx 5500 256mb running on win xp

i keep on gettin the blue screen most of the time when it loads win xp
mostly i think it is my video card or my ddr ram crashing i put my
voltage adjustment on the rams to auto so it wont crash as often now
but its running really slow when it loads the voltage settin is
either 2.5 2.6 or 2.7 i didnt really try other settings but can
anyone tell me which one would run the best with out it crashing as
often n as long as its good enough to move around when it loads O_o
please ?
and my video card crashes often or wont b able to load a game too i
don't know anything about settin the video card making it stable n
wont crash in windows sometimes or in a game please help me outs !
thanks ppl :cry:

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
 
On 12 May 2004 06:04:01 -0400,
i have a 2800+ amd barton with
the K7N2 delta series L motherboard,
nvidia nforce 2 chipset,
512k ddr ram ddr 400 pc3200 and
a geforce fx 5500 256mb running on win xp

i keep on gettin the blue screen most of the time when it loads win xp
mostly i think it is my video card or my ddr ram crashing i put my
voltage adjustment on the rams to auto so it wont crash as often now
but its running really slow when it loads the voltage settin is
either 2.5 2.6 or 2.7 i didnt really try other settings but can
anyone tell me which one would run the best with out it crashing as
often n as long as its good enough to move around when it loads O_o
please ?
and my video card crashes often or wont b able to load a game too i
don't know anything about settin the video card making it stable n
wont crash in windows sometimes or in a game please help me outs !
thanks ppl :cry:

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
Click to expand...

Take a big breath and raise your spirits.
Just take it one step at the time.
At what 'level' do we need to help you with this? How much do you know
to get right?
Who built the PC, - you?
You don't have a 256MB agp aperture, I hope? Set it to 64MB!
What are your settings, FSB 166GHz/333 and memory 166GHz/DDR333, I
hope?
And what kind of PSU do you have?
Your temps alright?
Do you have any extra peripheral installed, that you can remove? Try
to get it to work on a minimal config, video, hd, cd, first.
Who Installed XP, - you?
(and it was installed onto this particular config, I trust? You
haven't foolishly moved the install from another PC, right?)
Is Windows XP fully updated from MS online 'Windows Update'?
Does 'dxdiag' report any problem?
Then: what are your debugging options. Is the 512MB ram in two 256MB
sticks? Try one at a time.
Do you possess an alternative videocard?
Can you 'borrow' an alternative ATX PSU from another PC?

ancra
 
about ram problem I don't know, but for nvidia
crashing try downloading latest Nvidia Detonator drivers!
they fixed crashing on most games on my comp!
 
kwaziturtle@yahoo-dot- said:
i have a 2800+ amd barton with
the K7N2 delta series L motherboard,
nvidia nforce 2 chipset,
512k ddr ram ddr 400 pc3200 and
a geforce fx 5500 256mb running on win xp

i keep on gettin the blue screen most of the time when it loads win xp
mostly i think it is my video card or my ddr ram crashing i put my
voltage adjustment on the rams to auto so it wont crash as often now
but its running really slow when it loads the voltage settin is
either 2.5 2.6 or 2.7 i didnt really try other settings but can
anyone tell me which one would run the best with out it crashing as
often n as long as its good enough to move around when it loads O_o
please ?
and my video card crashes often or wont b able to load a game too i
don't know anything about settin the video card making it stable n
wont crash in windows sometimes or in a game please help me outs !
thanks ppl :cry:
Click to expand...
And your power supply is made by whom and what rating?
 
Mwahs said:
i have a 2800+ amd barton with
the K7N2 delta series L motherboard,
nvidia nforce 2 chipset,
512k ddr ram ddr 400 pc3200 and
a geforce fx 5500 256mb running on win xp

i keep on gettin the blue screen most of the time when it loads win xp
mostly i think it is my video card or my ddr ram crashing
Click to expand...

Do you have two dimms of RAM or one? If two, try booting with just one
in place. If that works OK, swap with the other and try again. That
may tell you something.

Did you just built this PC?
 
ancra said:
You don't have a 256MB agp aperture, I hope? Set it to 64MB!
What are your settings, FSB 166GHz/333 and memory 166GHz/DDR333, I
hope?
Click to expand...

Good suggestions.
 
do you use the OB LAN? is it enabled in the bios and not used?


Mwahs said:
i have a 2800+ amd barton with
the K7N2 delta series L motherboard,
nvidia nforce 2 chipset,
512k ddr ram ddr 400 pc3200 and
a geforce fx 5500 256mb running on win xp

i keep on gettin the blue screen most of the time when it loads win xp
mostly i think it is my video card or my ddr ram crashing i put my
voltage adjustment on the rams to auto so it wont crash as often now
but its running really slow when it loads the voltage settin is
either 2.5 2.6 or 2.7 i didnt really try other settings but can
anyone tell me which one would run the best with out it crashing as
often n as long as its good enough to move around when it loads O_o
please ?
and my video card crashes often or wont b able to load a game too i
don't know anything about settin the video card making it stable n
wont crash in windows sometimes or in a game please help me outs !
thanks ppl :cry:

==============
Posted through www.HowToFixComputers.com/bb - free access to
Click to expand...
hardware troubleshooting newsgroups.
 
my fsb is been on 166mhz but i just change the aperture size for mah
vid card memory to 64mb and other settings for memory rams i dont
know how ta set lol i cant find it in the bios mode thanks for all
the advice and help pppl

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
 
my fsb is been on 166mhz but i just change the aperture size for mah
vid card memory to 64mb and other settings for memory rams i dont
know how ta set lol i cant find it in the bios mode thanks for all
the advice and help pppl

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
 
Take a big breath and raise your
spirits.
Just take it one step at the time.
At what 'level' do we need to help you with this? How much do you know

to get right?
Who built the PC, - you?
You don't have a 256MB agp aperture, I hope? Set it to 64MB!
What are your settings, FSB 166GHz/333 and memory 166GHz/DDR333, I
hope?
And what kind of PSU do you have?
Your temps alright?
Do you have any extra peripheral installed, that you can remove? Try
to get it to work on a minimal config, video, hd, cd, first.
Who Installed XP, - you?
(and it was installed onto this particular config, I trust? You
haven't foolishly moved the install from another PC, right?)
Is Windows XP fully updated from MS online 'Windows Update'?
Does 'dxdiag' report any problem?
Then: what are your debugging options. Is the 512MB ram in two
256MB
sticks? Try one at a time.
Do you possess an alternative videocard?
Can you 'borrow' an alternative ATX PSU from another PC?


i kno about enough i order the pc online and set in the video card mah
self mah aperture size is on 64mb my settin for fsb clocking is
166mhz and i dunno how much it is on my memory dun really know how to
set memory fsb clock
my psu is 350wattz
temperature is about 47 c right now hehe its hotter today usually is
lower my peripheral should b around minimal config already
i installed the xp from professional version i format mah comp and
installed win xp home edition cause it was causin too much error
maybe cause the cd was scratch up
yes is fully updated now but then i think its blocking me from
extracting .cab files
there was no problem found on my dxdiag
i only have 1 512 ddr 400 pc 3200 ram
wells my motherboard does not come wit a onboard vid card so i guess
there is no alternative vid card unless i bought this vid card some
where else n i manually installed it if u call that as an
alternative
nop cant borrow atx psu from another pc
i guess it was the rams voltage setting on too high i put it on 2.6
now i see less of the ~blue screen of death~ lol but theres still
problems with my video card i think

==============
Posted through www.HowToFixComputers.com/bb - free access to hardware troubleshooting newsgroups.
 
Back
Top