Aligning a HP cartridge?

  • Thread starter Thread starter Roland Bengtsson
  • Start date Start date
R

Roland Bengtsson

I have a multifunction printer HP PSC 1315. I'm satisfied with the
price/performance except one thing.

Every time I turn on the printer this message appear:

"If you have just installed a new print cartridge it is recommended
that you align it". Click on 'Align' to align your new print
cartridge.

If the printer have paper loaded it starts to print an align printout.
That's not what I want.

The have two slots for print cartridges.
The left can have one 3-color cartridge.
The right can have a black cartridge or a 3-color photo cartridge.
This to print photos with six colors.

Is it possible that there is some kind of patch or preferences
somewhere to just turn of this "feature" for the printer? I guess I'm
not alone of this problem.

/Roland
 
Roland said:
I have a multifunction printer HP PSC 1315. I'm satisfied with the
price/performance except one thing.

Every time I turn on the printer this message appear:

"If you have just installed a new print cartridge it is recommended
that you align it". Click on 'Align' to align your new print
cartridge.
Click to expand...

Did you align the cratridge when you put in a new one? If not, you will
get this message until you do so.
If the printer have paper loaded it starts to print an align printout.
That's not what I want.

The have two slots for print cartridges.
The left can have one 3-color cartridge.
The right can have a black cartridge or a 3-color photo cartridge.
This to print photos with six colors.

Is it possible that there is some kind of patch or preferences
somewhere to just turn of this "feature" for the printer? I guess I'm
not alone of this problem.

/Roland
Click to expand...

What's the problem? You _should_ align any new cartridge you install.
Keep in mind that the nozzles are very, very small - slight differences
in cartridge positioning will change the position of the nozzles
relative to the other cartridge, which will cause some blur, may cause
moire patterns, etc.

"Aligning" the cartridge actually changes the timing of the ink-jet, so
that dots of ink land where they are supposed to.

Have you checked Printer --> Properties for available options?

HTH&GL
 
Roland Bengtsson said:
I have a multifunction printer HP PSC 1315. I'm satisfied with the
price/performance except one thing.

Every time I turn on the printer this message appear:

"If you have just installed a new print cartridge it is recommended
that you align it". Click on 'Align' to align your new print
cartridge.
Click to expand...

Let the alignment page print, then load the page on the scanner to complete the
alignment. Once the alignment has been done you will no longer get the
messages.

Regards,
Bob Headrick, not speaking for my employer HP
 
Back
Top