AIW 9800 Sound Problem

  • Thread starter Thread starter elaineuk123
  • Start date Start date
E

elaineuk123

My Sound Card works just fine, but as soon as I open up TV I get the
channel I need but with no sound. As soon as I come out to the
platform level the sound returns. The sound component (card) is built
into the motherboard. Is ther a setting that forces the use of the
onboard sound card?

Redards
 
My Sound Card works just fine, but as soon as I open up TV I get the
channel I need but with no sound. As soon as I come out to the
platform level the sound returns. The sound component (card) is built
into the motherboard. Is ther a setting that forces the use of the
onboard sound card?

Redards
Click to expand...

run the sound initialization wizard, you have to route the sound from the
video card to the soundcard and select the input you used via the wizard.
rtfm and all that jazz
 
Gordon,
Thank you very much for your reply. I am taking an antenna input to
the tuner and I wa expecting the tuner to generate the audio and video
and that the generated audio would play through the sound card.

I am assuming that there is no physical television available to get
any inputs from. My previous tuner card worked quite well in this
configuration.

You say route the audio from the video card and then select an input.
This part of the wizard did not run when the TV channels were set up.

Regards
 
Back
Top