AIW 9700 TV VOLUME?

  • Thread starter Thread starter At my comp
  • Start date Start date
A

At my comp

SPECS:
WinXP
Composite cables connected directly to digital cable box
Catalyst 5.6/MMC 9.08/latest encoder drivers

PROBLEM:
MMC TV version 9.08 only allows me to hear the "max" volume at about 1/4
(just guessing) of the volume that 8.1 allowed. In setup, I checked the
TV Tuner tab, and the volume increases (just snow because it is trying
to display from the coax input) then decreases when I switch back to the
composite connection!

According to some Web discussions, most people who experienced sound
problems just needed to check their mixer. I maxed both play and record
levels in the mixer plus all the settings in Control Panel. Has anyone
else had this problem?
 
At my comp said:
SPECS:
WinXP
Composite cables connected directly to digital cable box
Catalyst 5.6/MMC 9.08/latest encoder drivers

PROBLEM:
MMC TV version 9.08 only allows me to hear the "max" volume at about 1/4
(just guessing) of the volume that 8.1 allowed. In setup, I checked the
TV Tuner tab, and the volume increases (just snow because it is trying
to display from the coax input) then decreases when I switch back to the
composite connection!

According to some Web discussions, most people who experienced sound
problems just needed to check their mixer. I maxed both play and record
levels in the mixer plus all the settings in Control Panel. Has anyone
else had this problem?
Click to expand...

Have you tried adjusting the wave setting?
 
Back
Top