AGP 2X problem

  • Thread starter Thread starter MIKI_TK
  • Start date Start date
M

MIKI_TK

Hello
I buy Radeon 9200 and I have problem with turn on AGP to higher than 1x I
now that my mainbord support 2x and I have enabled it in BIOS on mainbord
ECS P6BAP-AP I didn't find nothin to change connected with AGP.
I think that I don't need BIOS actualization
Please give me some advice
MIKI_PL
 
MIKI_TK said:
Hello
I buy Radeon 9200 and I have problem with turn on AGP to higher than 1x I
now that my mainbord support 2x and I have enabled it in BIOS on mainbord
ECS P6BAP-AP I didn't find nothin to change connected with AGP.
I think that I don't need BIOS actualization
Please give me some advice

I would definitely suggest updating the motherboard BIOS.
Try to change the AGP speed from the Catalyst control panel.
Also try to look if yor motherboard has on-board jumpers for setting the
AGP speed.
 
Hello
I buy Radeon 9200 and I have problem with turn on AGP to higher than 1x I
now that my mainbord support 2x and I have enabled it in BIOS on mainbord
ECS P6BAP-AP I didn't find nothin to change connected with AGP.
I think that I don't need BIOS actualization
Please give me some advice
MIKI_PL

Have you installed the mother board's updated AGP drivers?



--
Free Windows/PC help,
http://www.geocities.com/sheppola/trouble.html
remove obvious to reply
email (e-mail address removed)
Free original songs to download and,"BURN" :O)
http://www.soundclick.com/bands/8/nomessiahsmusic.htm
 
There are no jumpers connected to AGP and
new drivers for this MB does not exits
MB manufacturer don't say anything about new support AGP i new updated BIOS
MIKI_TK
 
There are no jumpers connected to AGP and
new drivers for this MB does not exits
MB manufacturer don't say anything about new support AGP i new updated BIOS
MIKI_TK

The board uses Via 693 chipset, you can get new drivers
here:
http://www.viaarena.com/downloads/drivers/4in1/via_hyperion 4 in 1_v453v.zip

It is a cheap and aging motherboard with potentially
defective capacitors, you might be lucky that it works at
all. It may not even make much difference with a R9200 and
that old board/CPU, whether the AGP is at 2X or only 1X.

If the power supply is cheap and old too, system might
barely be stable and 1X is all you're going to get.
 
The board uses Via 693 chipset, you can get new drivers
here:
http://www.viaarena.com/downloads/drivers/4in1/via_hyperion 4 in 1_v453v.zip

It is a cheap and aging motherboard with potentially
defective capacitors, you might be lucky that it works at
all. It may not even make much difference with a R9200 and
that old board/CPU, whether the AGP is at 2X or only 1X.

If the power supply is cheap and old too, system might
barely be stable and 1X is all you're going to get.

Good call.



--
Free Windows/PC help,
http://www.geocities.com/sheppola/trouble.html
remove obvious to reply
email (e-mail address removed)
Free original songs to download and,"BURN" :O)
http://www.soundclick.com/bands/8/nomessiahsmusic.htm
 
Back
Top