D
Dennis Grondin
Here Is This Message I get when I get on the computer:
A problem has been detected and windows has been shut down
to prevent damage to your computer.
If this is the first time you've seen this stop error
screen restart your computer. If this screen appears
again, follow these steps:
check to be sure you have adequate (I DO) disk space. If a
driver is identified in the stop message, disable the
driver or check with the manufacturer for driver updates.
Try changing video adapters.
Check with your hardware vendor for any bios updates.
Disable bios memory options such as caching or shadowing.
If you need to use safe mode to remove or disable
components. Restart your computer, press F8 to select
advanced startup options, and then select safe mode:
Technical Information:
*** STOP: 0x0000008E
(0xC0000005,0xFC7C1128,0x7FE0360,0x00000000)
*** usbhub.sys - Address FC7C1128 base at FC7B6000, Date
Stamp 3d6ddc31
Beginning dump of physical memory.
Physical memory dump complete.
Contact your system administrator or technical support
group for further assistance.
------------------------------------------------
Now if I reboot from scratch, it will get me on my PC. But
if I use standby mode, I get this message. One more thing
I went onto the c: prompt program and typed batch at the c
prompt. And I believe that I may have caused this problem.
A problem has been detected and windows has been shut down
to prevent damage to your computer.
If this is the first time you've seen this stop error
screen restart your computer. If this screen appears
again, follow these steps:
check to be sure you have adequate (I DO) disk space. If a
driver is identified in the stop message, disable the
driver or check with the manufacturer for driver updates.
Try changing video adapters.
Check with your hardware vendor for any bios updates.
Disable bios memory options such as caching or shadowing.
If you need to use safe mode to remove or disable
components. Restart your computer, press F8 to select
advanced startup options, and then select safe mode:
Technical Information:
*** STOP: 0x0000008E
(0xC0000005,0xFC7C1128,0x7FE0360,0x00000000)
*** usbhub.sys - Address FC7C1128 base at FC7B6000, Date
Stamp 3d6ddc31
Beginning dump of physical memory.
Physical memory dump complete.
Contact your system administrator or technical support
group for further assistance.
------------------------------------------------
Now if I reboot from scratch, it will get me on my PC. But
if I use standby mode, I get this message. One more thing
I went onto the c: prompt program and typed batch at the c
prompt. And I believe that I may have caused this problem.