Advanced Server Stop REsponding

  • Thread starter Thread starter Mani1
  • Start date Start date
M

Mani1

I have two Fujitsu-siemens completely identical machines.
The windows 2000 Advance Server is installed on both
machines on RAID1. Due to some reasons I swapped the HDD
of both machines with each other. The Server Boots
normally but when it reaches the login screen, it stops
responding and screen was blur by that time.

The windows2000 was booted correctly in both SAFE MODE
AND SAFE MODE WITH NETWORKING, but didn't boot in normal
mode.

My question is if the machines are identical and both
have same operating system with same application and they
are on RAID 1 than Can I swap the HDD of these servers
with each other.

An Early response will be highly appreciable.

Thanks

Mani
 
Just because the servers look the same and are the same
model number does not mean they are made up of the same
parts inside. It sounds like you are having a driver
issue when you move the drive to the second machine. I
would not move the drive to the second system. If you
are trying to create a cluster or HA solution there are
other means of doing this.
 
Back
Top