adprep /forestprep failed - What next??

  • Thread starter Thread starter gws
  • Start date Start date
G

gws

I ran adprep /forestprep on my 2k DC to get ready to add 2003 to my domain.
Well just my luck it failed. Will this mess up my domain?? as of right now
everything seems normal... Also what can I try to get adprep to run
succesfull.

logs following -

Adprep was unable to upgrade the schema on the schema master.

[Status/Consequence]

The schema will not be restored to its original state.

[User Action]

Check the Ldif.err log file in the
C:\WINNT\system32\debug\adprep\logs\20050414190806 directory for detailed
information.



Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the schema
master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep\logs\20050414190806 directory for more
information.



THEN WHEN YOU LOOK AT THE LOG FILES THIS IS WHAT IT SAYS..
LDIF.LOG FOLLOWS:
Connecting to "DOMAINSER"
Logging in as current user using SSPI
Importing directory from file "C:\WINNT\system32\sch27.ldf"
Loading entries
1: CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXXX,DC=com
Entry DN:
CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXXXX,DC=com
Add error on line 1: Busy
The server side error is "A database error has occurred."
0 entries modified successfully.
An error has occurred in the program

SCHUPGR.LOG FOLLOWS:
Opened Connection to DOMAINSERVER

SSPI Bind succeeded

Found Naming Context DC=XXXX,DC=com

Found Naming Context CN=Schema,CN=Configuration,DC=XXXX,DC=com

Found Naming Context CN=Configuration,DC=XXXXX,DC=com

Current Schema Version is 13

Upgrading schema to version 30

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch14.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch15.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch16.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch17.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch18.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch19.ldf -s DOMAINSERVER -c DC=X DC=XXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch20.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch21.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch22.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch23.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch24.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch25.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch26.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch27.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

ERROR: Import from file C:\WINNT\system32\sch27.ldf failed. Error file is
saved in ldif.err.27.



If the error is "Insufficient Rights" (Ldap error code 50), please make sure
the current logged on user has rights to read/write objects in the schema
and configuration containers, or log off and log in as an user with these
rights and rerun schupgr.exe.
 
DISREGARD POST FIXED NOW!!!!


gws said:
I ran adprep /forestprep on my 2k DC to get ready to add 2003 to my domain.
Well just my luck it failed. Will this mess up my domain?? as of right
now everything seems normal... Also what can I try to get adprep to run
succesfull.

logs following -

Adprep was unable to upgrade the schema on the schema master.

[Status/Consequence]

The schema will not be restored to its original state.

[User Action]

Check the Ldif.err log file in the
C:\WINNT\system32\debug\adprep\logs\20050414190806 directory for detailed
information.



Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the schema
master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep\logs\20050414190806 directory for more
information.



THEN WHEN YOU LOOK AT THE LOG FILES THIS IS WHAT IT SAYS..
LDIF.LOG FOLLOWS:
Connecting to "DOMAINSER"
Logging in as current user using SSPI
Importing directory from file "C:\WINNT\system32\sch27.ldf"
Loading entries
1: CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXXX,DC=com
Entry DN:
CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXXXX,DC=com
Add error on line 1: Busy
The server side error is "A database error has occurred."
0 entries modified successfully.
An error has occurred in the program

SCHUPGR.LOG FOLLOWS:
Opened Connection to DOMAINSERVER

SSPI Bind succeeded

Found Naming Context DC=XXXX,DC=com

Found Naming Context CN=Schema,CN=Configuration,DC=XXXX,DC=com

Found Naming Context CN=Configuration,DC=XXXXX,DC=com

Current Schema Version is 13

Upgrading schema to version 30

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch14.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch15.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch16.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch17.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch18.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch19.ldf -s DOMAINSERVER -c DC=X DC=XXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch20.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch21.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch22.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch23.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch24.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch25.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch26.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

The command line passed to ldifde is C:\WINNT\system32\ldifde -i -f
C:\WINNT\system32\sch27.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

ERROR: Import from file C:\WINNT\system32\sch27.ldf failed. Error file is
saved in ldif.err.27.



If the error is "Insufficient Rights" (Ldap error code 50), please make
sure
the current logged on user has rights to read/write objects in the schema
and configuration containers, or log off and log in as an user with these
rights and rerun schupgr.exe.
Click to expand...
 
gws said:
DISREGARD POST FIXED NOW!!!!


gws said:
I ran adprep /forestprep on my 2k DC to get ready to add 2003 to my domain.
Well just my luck it failed. Will this mess up my domain?? as of right
now everything seems normal... Also what can I try to get adprep to run
succesfull.

logs following -

Adprep was unable to upgrade the schema on the schema master.

[Status/Consequence]

The schema will not be restored to its original state.

[User Action]

Check the Ldif.err log file in the
C:WINNTsystem32debugadpreplogs20050414190806 directory for detailed
information.



Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the schema
master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the
C:WINNTsystem32debugadpreplogs20050414190806 directory for more
information.



THEN WHEN YOU LOOK AT THE LOG FILES THIS IS WHAT IT SAYS..
LDIF.LOG FOLLOWS:
Connecting to "DOMAINSER"
Logging in as current user using SSPI
Importing directory from file "C:WINNTsystem32sch27.ldf"
Loading entries
1: CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXX
X,DC=com
Entry DN:
CN=ms-Exch-House-Identifier,CN=Schema,CN=Configuration,DC=XXXX
XX,DC=com
Add error on line 1: Busy
The server side error is "A database error has occurred."
0 entries modified successfully.
An error has occurred in the program

SCHUPGR.LOG FOLLOWS:
Opened Connection to DOMAINSERVER

SSPI Bind succeeded

Found Naming Context DC=XXXX,DC=com

Found Naming Context CN=Schema,CN=Configuration,DC=XXXX,DC=com

Found Naming Context CN=Configuration,DC=XXXXX,DC=com

Current Schema Version is 13

Upgrading schema to version 30

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch14.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch15.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch16.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch17.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch18.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch19.ldf -s DOMAINSERVER -c DC=X DC=XXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch20.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch21.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch22.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch23.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch24.ldf -s DOMAINSERVER -c DC=X DC=XXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch25.ldf -s DOMAINSERVER -c DC=X DC=XXXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch26.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

The command line passed to ldifde is C:WINNTsystem32ldifde -i -f
C:WINNTsystem32sch27.ldf -s DOMAINSERVER -c DC=X DC=XXXXXXX,DC=com

ERROR: Import from file C:WINNTsystem32sch27.ldf failed. Error file is
saved in ldif.err.27.



If the error is "Insufficient Rights" (Ldap error code 50), please make
sure
the current logged on user has rights to read/write objects in the schema
and configuration containers, or log off and log in as an user with these
rights and rerun schupgr.exe.
Click to expand...
Click to expand...

Please tell us how this was fixed. / Rgds. XM
 
Back
Top