adprep failure, adding 2003 R2 x64 server to 2000 domain

  • Thread starter Thread starter dbloch3643
  • Start date Start date
D

dbloch3643

I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.

basically it is erroring out on two points.

"Adprep was unable to complete because the call back function (null)
failed.

Error message: Unable to connect to the domain controller
"xxxxxxx.com". "

And

"Adprep was unable to update forest-wide information.

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."

I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.

I also ran netdiag /v, no problems.

ran repadmin /showconn, it does show the one and only server

ran repadmin /showreps, again point to the dc server.

FSMO, all roles point to the current dc server.

Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.



Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.



Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.



Adprep copied file D:\adprep\409.csv from installation point to local
machine under directory C:\WINNT\system32\debug\adprep\data.



Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is (null).



LDAP API ldap_search_s() finished, return code is 0x0



Adprep successfully retrieved information from the local directory
service.



Adprep successfully initialized global variables.

[Status/Consequence]

Adprep is continuing.





ADPREP WARNING:



Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).



QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.



For more information about preparing your forest and domain see KB
article Q331161 at http://support.microsoft.com.



[User Action]

If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise, type
any other key and press ENTER to quit.



Adprep set the value of registry key System\CurrentControlSet\Services
\NTDS\Parameters\Schema Update Allowed to 1



Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_add_s() finished, return code is 0x44



Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.



Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_add_s() finished, return code is 0x44



Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x0



Adprep checked to verify whether operation cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com
has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.



Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.



LDAP API ldap_search_s() finished, return code is 0x20



Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The operation has not run or is not currently running. It will be run
next.



Adprep was unable to complete because the call back function (null)
failed.

[Status/Consequence]

Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).

[User Action]

Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.



Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.

=========================================================
 
Hello dbloch3643,

Which CD did you use for the adprep command? With the first (2003) you upgrade
the schema to version 31 and with the second (R2)from 31 to 32. And the account
you use must be a memeber of the Schema admins.

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.

basically it is erroring out on two points.

"Adprep was unable to complete because the call back function (null)
failed.

Error message: Unable to connect to the domain controller
"xxxxxxx.com". "

And

"Adprep was unable to update forest-wide information.

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."

I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.

I also ran netdiag /v, no problems.

ran repadmin /showconn, it does show the one and only server

ran repadmin /showreps, again point to the dc server.

FSMO, all roles point to the current dc server.

Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.
Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.

Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.

Adprep copied file D:\adprep\409.csv from installation point to local
machine under directory C:\WINNT\system32\debug\adprep\data.

Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is (null).

LDAP API ldap_search_s() finished, return code is 0x0

Adprep successfully retrieved information from the local directory
service.

Adprep successfully initialized global variables.

[Status/Consequence]

Adprep is continuing.

ADPREP WARNING:

Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).

QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.

For more information about preparing your forest and domain see KB
article Q331161 at http://support.microsoft.com.

[User Action]

If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise, type
any other key and press ENTER to quit.

Adprep set the value of registry key System\CurrentControlSet\Services
\NTDS\Parameters\Schema Update Allowed to 1

Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_add_s() finished, return code is 0x44

Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.

Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_add_s() finished, return code is 0x44

Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The

base entry to start the search is

cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdates
,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation

cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdates
,CN=Configuration,DC=XXXXX,DC=com

has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configur
ation,DC=XXXXX,DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configur
ation,DC=XXXXX,DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

LDAP API ldap_search_s() finished, return code is 0x20

Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.

[Status/Consequence]

The operation has not run or is not currently running. It will be run
next.

Adprep was unable to complete because the call back function (null)
failed.

[Status/Consequence]

Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).

[User Action]

Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.

Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.

=========================================================
Click to expand...
 
Hello dbloch3643,

Which CD did you use for the adprep command? With the first (2003) you upgrade
the schema to version 31 and with the second (R2)from 31 to 32. And the account
you use must be a memeber of the Schema admins.

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.


I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.
Click to expand...
basically it is erroring out on two points.
Click to expand...
"Adprep was unable to complete because the call back function (null)
failed.
Click to expand...
Error message: Unable to connect to the domain controller
"xxxxxxx.com". "

"Adprep was unable to update forest-wide information.
Click to expand...
Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."
Click to expand...
I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.
Click to expand...
I also ran netdiag /v, no problems.
Click to expand...
ran repadmin /showconn, it does show the one and only server
Click to expand...
ran repadmin /showreps, again point to the dc server.
Click to expand...
FSMO, all roles point to the current dc server.
Click to expand...
Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.
Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.
Click to expand...
Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.
Click to expand...
Adprep copied file D:\adprep\409.csv from installation point to local
machine under directory C:\WINNT\system32\debug\adprep\data.
Click to expand...
Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is (null).
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep successfully retrieved information from the local directory
service.
Click to expand...
Adprep successfully initialized global variables.
[Status/Consequence]
Click to expand...

Adprep is continuing.
Click to expand...
ADPREP WARNING:
Click to expand...
Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).
Click to expand...
QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.
Click to expand...
For more information about preparing your forest and domain see KB
article Q331161 athttp://support.microsoft.com.
Click to expand...
[User Action]
Click to expand...
If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise, type
any other key and press ENTER to quit.
Click to expand...
Adprep set the value of registry key System\CurrentControlSet\Services
\NTDS\Parameters\Schema Update Allowed to 1
Click to expand...
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
Click to expand...
LDAP API ldap_add_s() finished, return code is 0x44
Click to expand...
Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
Click to expand...

The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
Click to expand...
LDAP API ldap_add_s() finished, return code is 0x44
Click to expand...
Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
Click to expand...

The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
Click to expand...
base entry to start the search is

LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdates
,CN=Configuration,DC=XXXXX,DC=com
Click to expand...

has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configur
ation,DC=XXXXX,DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Configur
ation,DC=XXXXX,DC=com has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x0
Click to expand...
Adprep checked to verify whether operation cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com has completed.
[Status/Consequence]
Click to expand...

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Click to expand...
Adprep was about to call the following LDAP API. ldap_search_s(). The
base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
Click to expand...
LDAP API ldap_search_s() finished, return code is 0x20
Click to expand...
Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,
DC=com.
[Status/Consequence]
Click to expand...

The operation has not run or is not currently running. It will be run
next.
Click to expand...
Adprep was unable to complete because the call back function (null)
failed.
[Status/Consequence]
Click to expand...

Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).
Click to expand...
[User Action]
Click to expand...
Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.
Click to expand...
Adprep was unable to update forest-wide information.
[Status/Consequence]
Click to expand...

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.
Click to expand...
[User Action]
Click to expand...
Check the log file, Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.
Click to expand...
=========================================================- Hide quoted text -
Click to expand...

- Show quoted text -
Click to expand...

The adprep I am using is from the KB919151 and has only up to 31 and
has seemed to pass those ok. Also can you point me to where version
32 is, I can only find reference to 31.

Thanks
DB
 
Hello dbloch3643,

Sorry for the wrong schema versions they are 30 and 31. For the x86 based
2000 domain you have to use the x86 adprep not the x64 adprep version: (Apply
the schema extension, point 3)
http://technet2.microsoft.com/windo...24c7-4b5a-8165-dbd96727ec841033.mspx?mfr=true

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.
Hello dbloch3643,

Which CD did you use for the adprep command? With the first (2003)
you upgrade the schema to version 31 and with the second (R2)from 31
to 32. And the account you use must be a memeber of the Schema
admins.

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.

basically it is erroring out on two points.

"Adprep was unable to complete because the call back function (null)
failed.

Error message: Unable to connect to the domain controller
"xxxxxxx.com". "

And

"Adprep was unable to update forest-wide information.

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."

I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.

I also ran netdiag /v, no problems.

ran repadmin /showconn, it does show the one and only server

ran repadmin /showreps, again point to the dc server.

FSMO, all roles point to the current dc server.

Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.
Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.
Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.

Adprep copied file D:\adprep\409.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.

Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is (null).

LDAP API ldap_search_s() finished, return code is 0x0

Adprep successfully retrieved information from the local directory
service.

Adprep successfully initialized global variables.

[Status/Consequence]

Adprep is continuing.

ADPREP WARNING:

Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).

QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.

For more information about preparing your forest and domain see KB
article Q331161 athttp://support.microsoft.com.

[User Action]

If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise,
type any other key and press ENTER to quit.

Adprep set the value of registry key
System\CurrentControlSet\Services \NTDS\Parameters\Schema Update
Allowed to 1

Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_add_s() finished, return code is 0x44

Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.

Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_add_s() finished, return code is 0x44

Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.

[Status/Consequence]

The object exists so Adprep did not attempt to rerun this operation
but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation
cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation
cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation
cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The

base entry to start the search is

cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation

cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com

has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

LDAP API ldap_search_s() finished, return code is 0x0

Adprep checked to verify whether operation
cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.

[Status/Consequence]

The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.

Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

LDAP API ldap_search_s() finished, return code is 0x20

Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.

[Status/Consequence]

The operation has not run or is not currently running. It will be
run next.

Adprep was unable to complete because the call back function (null)
failed.

[Status/Consequence]

Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).

[User Action]

Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.

Adprep was unable to update forest-wide information.

[Status/Consequence]

Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.

[User Action]

Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20070707151104 directory for
more information.

=========================================================- Hide
quoted text -
Click to expand...
- Show quoted text -
Click to expand...
The adprep I am using is from the KB919151 and has only up to 31 and
has seemed to pass those ok. Also can you point me to where version
32 is, I can only find reference to 31.

Thanks
DB
Click to expand...
 
Hello dbloch3643,

Sorry for the wrong schema versions they are 30 and 31. For the x86 based
2000 domain you have to use the x86 adprep not the x64 adprep version: (Apply
the schema extension, point 3)http://technet2.microsoft.com/windowsserver/en/library/ed42abd5-24c7-...

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.


Hello dbloch3643,
Which CD did you use for the adprep command? With the first (2003)
you upgrade the schema to version 31 and with the second (R2)from 31
to 32. And the account you use must be a memeber of the Schema
admins.
Best regards
Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.
basically it is erroring out on two points.
"Adprep was unable to complete because the call back function (null)
failed.
Error message: Unable to connect to the domain controller
"xxxxxxx.com". "
And
"Adprep was unable to update forest-wide information.
Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."
I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.
I also ran netdiag /v, no problems.
ran repadmin /showconn, it does show the one and only server
ran repadmin /showreps, again point to the dc server.
FSMO, all roles point to the current dc server.
Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.
Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.
Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.
Adprep copied file D:\adprep\409.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.
Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is (null).
LDAP API ldap_search_s() finished, return code is 0x0
Adprep successfully retrieved information from the local directory
service.
Adprep successfully initialized global variables.
[Status/Consequence]
Adprep is continuing.
ADPREP WARNING:
Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).
QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.
For more information about preparing your forest and domain see KB
article Q331161 athttp://support.microsoft.com.
[User Action]
If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise,
type any other key and press ENTER to quit.
Adprep set the value of registry key
System\CurrentControlSet\Services \NTDS\Parameters\Schema Update
Allowed to 1
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_add_s() finished, return code is 0x44
Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_add_s() finished, return code is 0x44
Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The
base entry to start the search is
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com
has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x20
Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
[Status/Consequence]
The operation has not run or is not currently running. It will be
run next.
Adprep was unable to complete because the call back function (null)
failed.
[Status/Consequence]
Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).
[User Action]
Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.
Adprep was unable to update forest-wide information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.
[User Action]
Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20070707151104 directory for
more information.
Click to expand...
Click to expand...

...

read more »- Hide quoted text -

- Show quoted text -
Click to expand...

I am using the x86 version and running it on the w2k box, which is the
fsmo (all) role owner.

DB
 
Hello dbloch3643,

Sorry for the wrong schema versions they are 30 and 31. For the x86 based
2000 domain you have to use the x86 adprep not the x64 adprep version: (Apply
the schema extension, point 3)http://technet2.microsoft.com/windowsserver/en/library/ed42abd5-24c7-...

Best regards

Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and confers
no rights.


Hello dbloch3643,
Which CD did you use for the adprep command? With the first (2003)
you upgrade the schema to version 31 and with the second (R2)from 31
to 32. And the account you use must be a memeber of the Schema
admins.
Best regards
Myweb
Disclaimer: This posting is provided "AS IS" with no warranties, and
confers
no rights.
I have only 1 DC in my 2000 domain, it is SP4 and up to date (patch
wise). The 2003 R2 server is x64, so I got the hotfix KB919151 from
microsoft. While running the adprep /forestprep (on the current dc
server) it errors out.
basically it is erroring out on two points.
"Adprep was unable to complete because the call back function (null)
failed.
Error message: Unable to connect to the domain controller
"xxxxxxx.com". "
And
"Adprep was unable to update forest-wide information.
Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation."
I have run dcdiag /c /v and it only reports failure on SMTP service
not running and errors with kccevent. Both of which should have no
impact.
I also ran netdiag /v, no problems.
ran repadmin /showconn, it does show the one and only server
ran repadmin /showreps, again point to the dc server.
FSMO, all roles point to the current dc server.
Log follows:
=============================================================
Adprep created the log file ADPrep.log under C:\WINNT\system32\debug
\adprep\logs\20070707151104 directory.
Adprep copied file D:\adprep\schema.ini from installation point to
local machine under directory C:\WINNT.
Adprep copied file D:\adprep\dcpromo.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.
Adprep copied file D:\adprep\409.csv from installation point to
local machine under directory C:\WINNT\system32\debug\adprep\data.
Adprep successfully made the LDAP connection to the local domain
controller XXXXXX.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is (null).
LDAP API ldap_search_s() finished, return code is 0x0
Adprep successfully retrieved information from the local directory
service.
Adprep successfully initialized global variables.
[Status/Consequence]
Adprep is continuing.
ADPREP WARNING:
Before running adprep, all Windows 2000 domain controllers in the
forest should be upgraded to Windows 2000 Service Pack 1 (SP1) with
QFE 265089, or to Windows 2000 SP2 (or later).
QFE 265089 (included in Windows 2000 SP2 and later) is required to
prevent potential domain controller corruption.
For more information about preparing your forest and domain see KB
article Q331161 athttp://support.microsoft.com.
[User Action]
If ALL your existing Windows 2000 domain controllers meet this
requirement, type C and then press ENTER to continue. Otherwise,
type any other key and press ENTER to quit.
Adprep set the value of registry key
System\CurrentControlSet\Services \NTDS\Parameters\Schema Update
Allowed to 1
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_add_s() finished, return code is 0x44
Adprep attempted to create the directory service object
cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Adprep was about to call the following LDAP API. ldap_add_s(). The
entry to add is
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_add_s() finished, return code is 0x44
Adprep attempted to create the directory service object
cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXXX,DC=com.
[Status/Consequence]
The object exists so Adprep did not attempt to rerun this operation
but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=3467dae5-dedd-4648-9066-
f48ac186b20a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=33b7ee33-1386-47cf-baa1-
b03e06473253,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=e9ee8d55-c2fb-4723-a333-
c80ff4dfbf45,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The
base entry to start the search is
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=ccfae63a-7fb5-454c-83ab-0e8e1214974e,cn=Operations,cn=ForestUpdat
es ,CN=Configuration,DC=XXXXX,DC=com
has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation cn=ad3c7909-
b154-4c16-8bf7-2c3a7870bb3d,cn=Operations,cn=ForestUpdates,CN=Config
ur ation,DC=XXXXX,DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x0
Adprep checked to verify whether operation
cn=26ad2ebf-f8f5-44a4-b97c-
a616c8b9d09a,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun
this operation but is continuing.
Adprep was about to call the following LDAP API. ldap_search_s().
The base entry to start the search is cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
LDAP API ldap_search_s() finished, return code is 0x20
Adprep verified the state of operation cn=4444c516-f43a-4c12-9c4b-
b5c064941d61,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=XXXX
X, DC=com.
[Status/Consequence]
The operation has not run or is not currently running. It will be
run next.
Adprep was unable to complete because the call back function (null)
failed.
[Status/Consequence]
Error message: Unable to connect to the domain controller
"msXXXXX.XXXXX.COM". (0x80004005).
[User Action]
Check the log file Adprep.log, in the C:\WINNT\system32\debug\adprep
\logs\20070707151104 directory for more information.
Adprep was unable to update forest-wide information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the
schema master in order to complete this operation.
[User Action]
Check the log file, Adprep.log, in the
C:\WINNT\system32\debug\adprep \logs\20070707151104 directory for
more information.
Click to expand...
Click to expand...

...

read more »- Hide quoted text -

- Show quoted text -
Click to expand...

I am using the x86 version and running it on the w2k box, which is
the
fsmo (all) role owner.

DB
 
Back
Top