Address bar

  • Thread starter Thread starter alan burton
  • Start date Start date
A

alan burton

I write an address in the address bar and press enter and the address is
then highlighted in blue and it does not bring up the requested site. On
the odd occasions it does bring up the required site but only after 5 to 10
minutes. Why please?
Thanks A Burton.
 
alan said:
I write an address in the address bar and press enter and the address
is
then highlighted in blue and it does not bring up the requested site.
On the odd occasions it does bring up the required site but only after
5 to 10
minutes. Why please?
Thanks A Burton.
Click to expand...

What is the virus/malware status of the computer? If you think it is
clean, what programs/versions did you use to determine this?

Be sure it is clean:

http://www.elephantboycomputers.com/page2.html#Removing_Malware

Malke
 
alan burton said:
I write an address in the address bar and press enter and the address is
then highlighted in blue and it does not bring up the requested site. On
the odd occasions it does bring up the required site but only after 5 to 10
minutes. Why please?
Thanks A Burton.
Click to expand...

From http://www.fjsmjs.com/OE/nolinks.htm

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://inetexplorer.mvps.org/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

6. See Internet Explorer 6.0 Service Pack 1 may display a blank Web page
after you select Auto-Select encoding
http://support.microsoft.com/kb/870863

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.
 
Many thanks for info.
Frank Saunders said:
From http://www.fjsmjs.com/OE/nolinks.htm

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following
message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://inetexplorer.mvps.org/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

6. See Internet Explorer 6.0 Service Pack 1 may display a blank Web page
after you select Auto-Select encoding
http://support.microsoft.com/kb/870863

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for
WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which
is probably in the Win98 (i386 for WinXP) folder of your installation
CD-ROM (typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386
for WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has
been successfully extracted'.

You may need to reboot.
Click to expand...
 
Back
Top