Adding memory problem

  • Thread starter Thread starter Russell
  • Start date Start date
R

Russell

Am attempting to add identical 512MB ULT30215 184 pin DDR into the second
socket available on my Gigabyte motherboard, but the system won't recognise
it, or reboot succesfully.
Any ideas?
Thanks
 
Do both sticks work one at a time in either memory socket? How many sockets
are on the board?
 
Hi David, your question has produced the cure.
I have 2 slots ... I moved the stick to the 2nd socket and it worked and
rebooted successfully so I inserted the other stick in the 1st socket, and
the bios then recognised both sticks/sockets and rebooted succesfully. So,
that is cured, but I don't know why. Why?

Many thanks,
 
Hi David, your question has produced the cure.
I have 2 slots ... I moved the stick to the 2nd socket and it worked and
rebooted successfully so I inserted the other stick in the 1st socket, and
the bios then recognised both sticks/sockets and rebooted succesfully.
So,
that is cured, but I don't know why. Why?
Click to expand...

In addition to what Bob says, it could have been dirty contacts on either
the module or the socket. Inserting and removing them tends to clean them
out/off.

-John O
 
Back
Top