Adding an company long distance access code at the end of my fax

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

My company has an access code for each department for long distance access
which is entered after the number is dialed and a tone is heard. How do I
incorporate that into the fax program?
 
Probably the easiest way would be to enter enough commas after the dialed
number to get you past the tone and follow them with the required access
code. Each comma adds a 2-3 second delay to the dialing process. Custom
calling card rules have limitations in this area.

Hal
--
Hal Hostetler, CPBE -- (e-mail address removed)
Senior Engineer/MIS -- MS MVP- Print /Imaging -- WA7BGX
http://www.kvoa.com -- "When News breaks, we fix it!"
KVOA Television, Tucson, AZ. NBC Channel 4
Still Cadillacin' - www.badnewsbluesband.com
 

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments. After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Configuration puzzle: long-distance access code ignored 7
Fax - Windows XP - long distance - busy signal 6
Sending long distance fax 4
Dialing Rules For Sending Fax By Long Distance 2
Long Distance? 2
Cannot get MS Fax to use a calling card 9
Using a calling card to fax: remove "1" from long-distance numbers dialed 5
Windows XP FAX Disconnects 2

Back
Top