Adding a hardware device

  • Thread starter Thread starter Maurice
  • Start date Start date
M

Maurice

Attempting to add an internal DVD ROM drive that is supposed to be plug and
play. When booting, error 'no system found' is generated. When the drive is
removed the machine boots normally. Apparently, the presence of the drive
confuses the system. If the drive is connected after booting there is the
option to 'add a hardware device'. Regrettably this option does not offer
drives as a device... opted for storage device but this option requires
drivers. Since this is plug and play there are no drivers. I have switched
between Master, Slave and cable select. Guidance sought
 
Maurice said:
Attempting to add an internal DVD ROM drive that is supposed to be plug
and
play. When booting, error 'no system found' is generated. When the drive
is
removed the machine boots normally. Apparently, the presence of the drive
confuses the system. If the drive is connected after booting there is the
option to 'add a hardware device'. Regrettably this option does not offer
drives as a device... opted for storage device but this option requires
drivers. Since this is plug and play there are no drivers. I have
switched
between Master, Slave and cable select. Guidance sought
Click to expand...


Have you ensured that the jumper settings on the new drive are set
correctly?


--
Mike Hall - MVP
How to construct a good post..
http://dts-l.com/goodpost.htm
How to use the Microsoft Product Support Newsgroups..
http://support.microsoft.com/default.aspx?pr=newswhelp&style=toc
Mike's Window - My Blog..
http://msmvps.com/blogs/mikehall/default.aspx
 
Have you ensured that the jumper settings on the new drive are set
correctly?
Click to expand...

What part of "I have switched between Master, Slave and cable select."
are you having a problem with?
 
Back
Top