Adding a client from one network to a domain controller on another

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have two private networks 192.168.45.0 and 192.168.46.0. The 45.0 network
is the primary network and it has a domain controller in which authentication
occurs for clients on the same network. I need to know how to get clients on
the 46.0 private/domainless network to join/authenticate to the primary
network with a domain controller. These networks are attached via routers
and there is a PIX firewall in between them.

Ken
 
You'll need to make sure your routers have a route established between them,
and probably will need to examine firewall ports so that the necessary ports
aren't blocked.

For help with the ports, see here:

http://www.microsoft.com/smallbusiness/gtm/securityguidance/articles/ref_net_ports_ms_prod.mspx

For help with the routers, refer to their reference or programming manuals.

--
Richard G. Harper [MVP Shell/User] (e-mail address removed)
* PLEASE post all messages and replies in the newsgroups
* for the benefit of all. Private mail is usually not replied to.
* My website, such as it is ... http://rgharper.mvps.org/
* HELP us help YOU ... http://www.dts-l.org/goodpost.htm
 
Back
Top