Add PCI card gives 1 Long 2 Short Beeps

  • Thread starter Thread starter Jane Tweedynn
  • Start date Start date
J

Jane Tweedynn

I have a three year old PC PIII 500, 64MB with Voodoo 3 16MB card.

Computer works perfectly fine and always has. I recently purchased a
Firewire & USB combo card which when i put in any of the 5 free pci slots
and power on the computer, instantly beeps 1 long and 2 short. Although the
computers hard drive turns for a while i have no video output.

When the card is out, the computer works fine, when the card is in the
computer beeps.

I know the card is seated correctly and i have tried the card in another pc
and it works fine.

I was about to send card back, after all the card does not work in my pc.

Is this possible? Can some cards not work in some pc's? Surely if this is
the case the manufacturer should state this?

If this is not possible, then the only thing i can change to make it work is
the bios. I have no problem changing options, i can always do a restore.
Trouble is i don't know what to change.

Anyone with any ideas before i admit defeat and return the card.
 
I have a three year old PC PIII 500, 64MB with Voodoo 3 16MB card.

Computer works perfectly fine and always has. I recently purchased a
Firewire & USB combo card which when i put in any of the 5 free pci slots
and power on the computer, instantly beeps 1 long and 2 short. Although the
computers hard drive turns for a while i have no video output.

When the card is out, the computer works fine, when the card is in the
computer beeps.

I know the card is seated correctly and i have tried the card in another pc
and it works fine.

I was about to send card back, after all the card does not work in my pc.

Is this possible? Can some cards not work in some pc's? Surely if this is
the case the manufacturer should state this?

If this is not possible, then the only thing i can change to make it work is
the bios. I have no problem changing options, i can always do a restore.
Trouble is i don't know what to change.

Anyone with any ideas before i admit defeat and return the card.
Click to expand...

Check the board maker's site for a BIOS update?



--
Free Windows/PC help,
It's a G not a J in jmx to reply :)
http://www.geocities.com/sheppola/trouble.html
Free songs download,
http://www.soundclick.com/bands/8/nomessiahsmusic.htm
 
Check the board maker's site for a BIOS update?
Click to expand...

Thanks, just updated BIOS. Unfortunately i still have the same problem. It
just doesn't make any sense!
 
Thanks, just updated BIOS. Unfortunately i still have the same problem. It
just doesn't make any sense!
Click to expand...

I would expect a conflict between this new card and the video card...
that might be checked by swapping in a different video card.


Dave
 
Unfortunately some cards don't work in some systems :/
I have an ECS board and you can't use any Netgear NICs on it IIRC :(
Click to expand...
We have found 2 cards that will cause a K7S5A not to boot. One is the
Netgear NIC (FA 311 I think) and the other is a Lava PCI Parallel interface
card. Other network cards and parallel interface work fine, but we tried
several of each of the Netgear an Lava cards, same symptoms every time,
every revision, every BIOS. Just stopped fighting it, and used a different
model.

JT
 
Back
Top