Hi George,
Make sure first that you have the latest version of JET installed, see How
To: Obtain the Latest Service Pack for the Microsoft Jet 4.0 Database Engine
http://support.microsoft.com/default.aspx?scid=kb;en-us;239114
If applying latest JET service pack does not work then attempt to
re-register the following files using "regsvr32.exe"
accwiz.dll
dao360.dll
The way you use "regsvr32.exe" is as follows:
- Click Start > Run and type
regsvr32 "full path of the file name"
- Click OK
I hope this helps! If you have additional questions on this topic, please
respond back to this posting.
Regards,
Eric Butts
Microsoft Access Support
"Microsoft Security Announcement: Have you installed the patch for
Microsoft Security Bulletin MS03-026? If not Microsoft strongly advises
you to review the information at the following link regarding Microsoft
Security Bulletin MS03-026
<
http://www.microsoft.com/security/security_bulletins/ms03-026.asp> and/or
to visit Windows Update at <
http://windowsupdate.microsoft.com/> to install
the patch. Running the SCAN program from the Windows Update site will help
to insure you are current with all security patches, not just MS03-026."
--------------------
| Content-Class: urn:content-classes:message
| From: "george" <
[email protected]>
| Sender: "george" <
[email protected]>
| Subject: acWzLib
| Date: Wed, 18 Feb 2004 04:36:32 -0800
| Lines: 12
| Message-ID: <
[email protected]>
| MIME-Version: 1.0
| Content-Type: text/plain;
| charset="iso-8859-1"
| Content-Transfer-Encoding: 7bit
| X-Newsreader: Microsoft CDO for Windows 2000
| X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4910.0300
| Thread-Index: AcP2G9bPCrlQSA36R5yjoJwU+dSj2Q==
| Newsgroups: microsoft.public.access.formscoding
| Path: cpmsftngxa07.phx.gbl
| Xref: cpmsftngxa07.phx.gbl microsoft.public.access.formscoding:221007
| NNTP-Posting-Host: tk2msftngxa11.phx.gbl 10.40.1.163
| X-Tomcat-NG: microsoft.public.access.formscoding
|
| I must have done something wrong with the settings in my
| computer because Access 2003 is not functioning properly.
| There are no wizards anymore. All my databases with a
| wizard made switchboard form as the startup form don't
| open. Also when I try to use the toolbox with the wizard
| activated it doesn't work. I get a message which says
| (among other things) to check the Control Wizards subkey
| or the Libraries key in my database's section of the
| Windows Registry to verify that they are listed and are
| available. I am not familiar with Windows. How do I do
| this? I am using Windows XP Professional. Any help will be
| greatly appreciated. Thanks, George
|
