Acer Scanner 4300U/3300U Installation

  • Thread starter Thread starter Alan C. Brown
  • Start date Start date
A

Alan C. Brown

I have a new Toshiba Satellite Pro M70 laptop with Win XP Pro SP2 (fully
updated).

I have a VuegoScan flatbed scanner (equivalent I think to Acer 4300U/3300U
&/or Benq S2W 4300U/3300U), which I had intended to install with the latest
scanner software update (mirascan_v403u10b.exe - 9.2MB), which I downloaded
from the internet.

However I inadvertantly connected the scanner to the laptop, and turned it
on before installing the scanner software, with the result that Windows XP
automatically detected the scanner. In Device Manager under Imaging Devices,
it shows up as Flatbed Scanner_23, Manufacturer : Acer Peripherals, and the
"Driver File Details" tab lists 11 drivers.

Question is, can I/should I install the scanner software that I downloaded ?

Are there any bad consequences in doing so?

How should I go about it ?

Would I be able to revert to the Windows scanner drivers if the software
installation fails ?

Would appreciate any advice.

Thank you
Alan C. Brown
 
Alan, rt click MyComputer>select Prop>Hardware>Device Manager>Imaging
Device. rt click choose Uninstall. Disconnect
the Scanner and restart. Install the Scanner Software and connect the
scanner when told to do so. Restart. You can always
go to Control Panel>Add/Remove Programs and uninstall the Scanner
Software.
 
Rich

Thank you very much for the info.

Is there any risk that the Windows XP drivers for the scanner will be
permanently lost when I uninstall them ?

If the Scanner software does not work, and I uninstall it, will the Windows
XP drivers for the scanner be automatically re-installed when I reconnect
the scanner to the laptop ?

Is there any possibility/likelihood that installing and uninstalling the
scanner will cause any conflicts with, or change the versions of, the
Windows XP drivers for the scanner.

By the way, I found an article entitled - "Windows XP: List of Scanners That
Are Supported by Windows Image Acquisition", which has a list of all the
supported scanners, including mine, Acer S2W 3300 or S2W 4300 (16V), but not
sure which.
Is there any way of telling ?

Alan C. Brown

------------
 
Thanks Rich

Tried it on my old laptop.

I installed the scanner software from the original scanner software CD. It
worked, but did not like it, and therefore uninstalled it. Restored system.

Then installed what I thought was the latest scanner software update
(mirascan_v403u10b.exe - 9.2MB) that I had downloaded. It did not work at
all. When I connected the scanner, it was detected as Scanner 22 by Windows
XP, which asked for drivers, which could not be found, even in the Mirascan
folder. Unistallled the software and did a system restore. Still detected as
Scanner 22 and still cannot locate the drivers.

Result now is that I cannot use the scanner with the original Windows XP
scanner drivers, which cannot be found. Also my Kodak L743 digital camera in
not recognised when I connect it to the laptop to transfer photos.

Only good thing is that I did not try this with the new laptop.

Would appreciate if anyone could advise me how to restore the Windows XP
drivers for the scanner, and if possible the drivers for the digital
camera( will probably have to reinstall the Kodak Easyshare software).

-----------------
 
I am going to start a new thread concerning the restoration of the Windows
XP
drivers for the scanner, and the drivers for the digital camera, because
that this will get lost in the current thread.

----------------
 
I am going to start a new thread concerning the restoration of the Windows
XP drivers for the scanner, and the drivers for the digital camera, because
I fear that this will get lost in the current thread.

-------------------
 
Back
Top