Access aborted

  • Thread starter Thread starter Firman
  • Start date Start date
F

Firman

Sometimes, but quite often, MSAccess aborted with detail
as follows:

MSACCESS caused an invalid page fault in
module KERNEL32.DLL at 017f:bff7a1a5.
Registers:
EAX=0000001c CS=017f EIP=bff7a1a5 EFLGS=00010202
EBX=004e6838 SS=0187 ESP=0062cd88 EBP=004e6834
ECX=00000004 DS=0187 ESI=004e6818 FS=0fc7
EDX=004e74a0 ES=0187 EDI=00000020 GS=0000
Bytes at CS:EIP:
8b 01 25 fc ff ff 0f 3b c7 73 04 85 c0 75 ec 8b
Stack dump:
0062cdbc 004e6818 00400000 00000001 bff7b31d 00400000
004e6818 00000020 00000200 004e6e34 004e6e38 00000001
004e6818 0062ce14 7ff214db 00400000

Who could explain what it was and why?
Thank you.
Firman
 
It's hard to say without knowing which version of Access you're using.

Go to the MS KB at http://support.microsoft.com/default.aspx?scid=fh;EN-US;KBHOWTO.

Type in: MSACCESS caused an invalid page fault in module KERNEL32.DLL

You should get 33 hits covering Access 95, 97, and 2000.

--

Sco

M.L. "Sco" Scofield, MCSD, MCP, MSS, Access MVP, A+
Useful Metric Conversion #15 of 19: 5 dialogues = 1 decalogue
Miscellaneous Access and VB "stuff" at www.ScoBiz.com
 
Thank you Sco, I am using Office2000.
I try to go to the address you mention but it is hard for
me to understand.
Regards,
Firman
-----Original Message-----
It's hard to say without knowing which version of Access you're using.

Go to the MS KB at http://support.microsoft.com/default.aspx?scid=fh;EN-
US;KBHOWTO.

Type in: MSACCESS caused an invalid page fault in module KERNEL32.DLL

You should get 33 hits covering Access 95, 97, and 2000.

--

Sco

M.L. "Sco" Scofield, MCSD, MCP, MSS, Access MVP, A+
Useful Metric Conversion #15 of 19: 5 dialogues = 1 decalogue
Miscellaneous Access and VB "stuff" at www.ScoBiz.com

"Firman" <[email protected]> wrote in
Click to expand...
message news:[email protected]...
 
Sorry Firman,

I'm getting different results tonight than I got when I sent you the first message.

Try looking at http://support.microsoft.com/default.aspx?scid=kb;en-us;208488. As this article says, page faults are caused by lots
of different things. This article has lots of ideas and suggestions.

Something else to check is that you have the latest service packs for both Office and Jet installed. See:

http://support.microsoft.com/default.aspx?scid=kb;en-us;312564
http://support.microsoft.com/default.aspx?scid=kb;EN-US;326585
http://support.microsoft.com/default.aspx?scid=kb;EN-US;239114

Good luck.

--

Sco

M.L. "Sco" Scofield, MCSD, MCP, MSS, Access MVP, A+
Useful Metric Conversion #15 of 19: 5 dialogues = 1 decalogue
Miscellaneous Access and VB "stuff" at www.ScoBiz.com
 
Back
Top