Abit IP35 Pro - No CPU Temperature !!!

  • Thread starter Thread starter newbee
  • Start date Start date
N

newbee

Hi all

I just assemble this above board with Core 2 Duo E8200 with Cool
Master Hyper TX2 Cooler and Corsair 2G memory.

Every thing is working fine, but neither in BIOS or in Abit Guru, I
see the CPU Temperature. It only says "N/A". I am familiar of modern
cpus. Is it ok or have I goofed off while installing CPU and Cooler
or the mother board is defective.

Can anybody familiar please shed some light on it. Thanks
 
newbee said:
Hi all

I just assemble this above board with Core 2 Duo E8200 with Cool
Master Hyper TX2 Cooler and Corsair 2G memory.

Every thing is working fine, but neither in BIOS or in Abit Guru, I
see the CPU Temperature. It only says "N/A". I am familiar of modern
cpus. Is it ok or have I goofed off while installing CPU and Cooler
or the mother board is defective.

Can anybody familiar please shed some light on it. Thanks
Click to expand...

Have you tried removing the CMOS battery and then clearing CMOS with the
jumper set to clear for about 30 seconds, and then put it back the way it
was? -Dave
 
Back
Top