Aaargh AGP Specs

  • Thread starter Thread starter Mark Derbyshire
  • Start date Start date
M

Mark Derbyshire

My new motherboard (Abit AV8 Pro) only supports 0.8V and 1.5V AGP specs
and NOT 3.3V. ATM I have a Sapphire 9500. Is this compatable or will I
have to get a new card. If so is the/any 9800 series compatible?

Any suggestions?

TIA
 
Mark said:
My new motherboard (Abit AV8 Pro) only supports 0.8V and 1.5V AGP specs
and NOT 3.3V. ATM I have a Sapphire 9500. Is this compatable or will I
have to get a new card. If so is the/any 9800 series compatible?

Any suggestions?
Click to expand...

3.3v is an old standard used with AGP 1x and 2x. Any board that supports 8x
(and the 9500 most assuredly does that) will run at .8 or 1.5.
 
Mark Derbyshire said:
My new motherboard (Abit AV8 Pro) only supports 0.8V and 1.5V AGP specs
and NOT 3.3V. ATM I have a Sapphire 9500. Is this compatable or will I
have to get a new card. If so is the/any 9800 series compatible?

Any suggestions?
Click to expand...
I'm running a 9500 Pro without any difficulties.
 
Back
Top