A8V deluxe Rev.2

  • Thread starter Thread starter Jeannot
  • Start date Start date
J

Jeannot

I just upgrade to the new bios 1013, in the hardware monitor, the vcore
voltage default is now 1.8 V in red, instead of 1.5 V we had before with
the orthers versions. ex: bios 1012,1010,1008 etc.
Do we have to change to ignore ?
I do not find any reports or advise for that bios change.

Thanks for your support.
JC
erase NOSpam- from my email address.
 
After running for 1 hour the voltage get down and staying from 1.47 to 1.50
instead before the bios update to version 1013 the reading was 1.504 to
1.550
Seem to be stable for now.
JC
 
U¿ytkownik "Jeannot said:
I just upgrade to the new bios 1013, in the hardware monitor, the vcore
voltage default is now 1.8 V in red, instead of 1.5 V we had before with
the orthers versions. ex: bios 1012,1010,1008 etc.
Do we have to change to ignore ?
I do not find any reports or advise for that bios change.

Thanks for your support.
JC
erase NOSpam- from my email address.
Click to expand...

1. upgrade bios to 1013
2. clear cmos (jumper in matherboard) !!!



JvP
 
ClearCMOS is almost mandatory after a BIOS flash, because it will avoid
weird behaviour after.
 
U¿ytkownik "Zeneca said:
ClearCMOS is almost mandatory after a BIOS flash, because it will avoid
weird behaviour after.
Click to expand...
software clear little inefficacious, > look athlon64 bios seting Vcore= 1.8V
!!!

my asus a8v identically seting Vcore after flash 1013 bios,
temperature fastly up 75C !!!
im hardawe jumper reset, matherboard seting Vcore goods.


JvP
 
Back
Top