A8N-SLI Deluxe SATA3 Problem

  • Thread starter Thread starter prosko
  • Start date Start date
P

prosko

I build a system using this board and an eval copy of Windows XP Pro 64.
Downloaded all the latest 64 bit drivers from Asus and Nvidia.

As part of the initial build, Windows was loaded on a old 15GB drive (PATA)
attached to the IDE1 as Master, and everything went very well. Then after
receiving a SATA Western Digital Raptor, the operating system was copied to
the Raptor and the system booted perfectly using the new drive. The system
recognized the new drive and then indicated a reboot was required. This is
as expected, all well and good.

But then I noticed a small green arrow/device icon on the right side of the
Task Bar. This usually appears when a USB Flash Drive is plugged into a USB
port. So I right-clicked on the icon and the dialogue box displayed the
Western Digital Hard Drive as a removable hard drive!

Has anyone else see this? I suppose it is probably a driver problem which
may be solved over time as the 64 bit version of Windows evolves.

Please let me know if others have seen this problem, and if so were they
able to solve it.

Thanks.
 
No problem. SATA3 supports removable drives. My SCSI 320 servers have
the same icon because those drives are hot swappable.

It's not a problem, it is a feature. You can connect your SATA drives
internally, or externally. Some folks temporarily connect these drives
outside the case just like they would a USB flash drive.
 
Normal.
SATA drives are supposed to show as removable, as they are hot swapable.
My SATA drives do the same.
 
Back
Top