A8N-E and 2GB of memory

  • Thread starter Thread starter Natéag
  • Start date Start date
N

Natéag

Has anyone had any problem running that board with
four 512 Meg momory modules ?

Will they run at 400 MHz or should I run them as
333MHz modules ? Or increase voltage ?

I have had, but one of the module may be defective.


TIA
 
Natéag said:
Has anyone had any problem running that board with
four 512 Meg momory modules ?

Will they run at 400 MHz or should I run them as
333MHz modules ? Or increase voltage ?

I have had, but one of the module may be defective.


TIA
Click to expand...

These will run at 400 Mhz but you need to tell the BIOS to run them at
400Mhz. If the BIOS is set to auto for the memory frequency it will default
to 333 if al;l four DIMM slots are occupied. I currently runn 4 x 512 Mb
PC5200 Elixir sticks at 400 Mhz without problem in my A8N-E.

Andy
 
Has anyone had any problem running that board with
four 512 Meg momory modules ?

Will they run at 400 MHz or should I run them as
333MHz modules ? Or increase voltage ?

I have had, but one of the module may be defective.


TIA
Click to expand...
i guess you have a e3 venice core or some other cpu...
i think the revision E6 of the venice core fix that problem.

Or a bios update could help also...
 
I have the latest BIOS.

I found I had a defective module. It was replaced
and no more data corruption. So far.
 
Back
Top