A7V133 and XP CPU

  • Thread starter Thread starter sdzierza
  • Start date Start date
S

sdzierza

Would I be able to use a XP 2400 in my A7V133? If not, what is the highest I
can go for. I am currently running a 1400 T-Bird. Should I bother, or just
wait until I can upgrade the entire mobo/cpu/memory?
 
X-No-Archive: Yes

Tom said:
I have an XP2100+ Tbred B running fine at 2266MHz (17*133.3) in my
rev 1.05



Regards,
Tom
Click to expand...

How did you get the higher multipliers? My rev. 1.05 will only go to
12.5. If I try anything higher it locks up solid and I have to clear the
CMOS to get it back.
 
How did you get the higher multipliers? My rev. 1.05 will only go to
12.5. If I try anything higher it locks up solid and I have to clear the
CMOS to get it back.
Click to expand...

The default configuration of this chip effectively adds an 8x multiplier,
so you use the 9x setting in jumpered mode to achieve 17x. I also needed
to set the core voltage to 1.80. In jumper-free mode it will run at 20*100
with 1.65v.

Regards,
Tom
 
Back
Top