A7N8X2.0 dO i NEED TO CHANGE BIOS?

  • Thread starter Thread starter sdlomi
  • Start date Start date
S

sdlomi

Just received new A7N8X ver. 2.0 with bios 1006. Is there any need to
update the bios? The newest, I think, is1007. Am going to use XP2100
T'bred. Thanks, sdlomi
 
Just received new A7N8X ver. 2.0 with bios 1006. Is there any need to
update the bios? The newest, I think, is1007. Am going to use XP2100
T'bred. Thanks, sdlomi
Click to expand...

If you mean the A7N8X Non-Deluxe v2, I'm still using 1004 on mine , zero
problems to date.

Ed
 
Ed said:
Barton 2800+
Click to expand...
Great! What ram do you use (I only have single-channel, 2700 RK-Byte
256 mb, DDR.)? Overclocking? If so, what is your stable result? TIA,
sdlomi
 
Great! What ram do you use (I only have single-channel, 2700 RK-Byte
256 mb, DDR.)? Overclocking? If so, what is your stable result? TIA,
sdlomi
Click to expand...

I upgraded in mid-May, video card, drives, etc, etc from older system.
Antec SX-1040BII Full Tower/SmartPower 400W
Asus A7N8X v2.0
Athlon XP 2800+ 512K L2
Vantec Aeroflow VA4-C7040
3x256MB Corsair PC3200LL [2-2-2-6-T1]
ChainTech G4 Ti4200 64MB 4x - 4ns ram :(
WD 120GB 8MB ATA-100 7200
WD 40GB 2MB ATA-100 7200
RICHO 5125 DVD+RW/CDRW 2.4x/12x/32x
AOPEN CDRW 48x12x50x
Alps 1.44MB Floppy
(printers, router, joystick, etc,etc)


2388MHz @ 1.825v is as far as I ever pushed it, I usually run it at
200x11 1.675v, it's fast enough. ;p

Using the onboard sound with RealTek Wdm_a349 drivers to enable 6CH
sound isn't too, should have an Audigy 2 here to play with by next week.

Ed
 
Just received new A7N8X ver. 2.0 with bios 1006. Is there any need to
update the bios? The newest, I think, is1007. Am going to use XP2100
T'bred. Thanks, sdlomi
Click to expand...

FWIIW, I just flashed my 1005 to 1007 to get the latest SATA Bios and had no
issues. In fact, I flashed back to 1005 and then back to 1007 (I was
chasing a problem that I thought was the BIOS but it wasn't) and didn't have
any issues.

- Mark
 
Back
Top