A7N8X Deluxe2.0 w/1005 - Cold Boot Issue

  • Thread starter Thread starter cal
  • Start date Start date
C

cal

Anyone experiencing this? When cold booting system hangs before post.
After reset it boots perfectly. Wondering if this could be a glitch
in bios version 1005 as I think it started after bios update. I don't
think its a power supply issue as after reset it boots fine.

I'm running:
XP2600/333
400 w Antec
2-256 pc2100 (I'll get better ram when prices drop)
Pri/Master-ATA100 40gig
Pri/Slave-ATA66 20gig
Sec/Master-DVDrom
Sec/Slave-CDRW
SATA1-ATA100 20gig w/Iwill converter
SATA2-not used
AGP-Gainward Ti-450(Ti-200) Golden Sample (old but still a great card)

cal
 
Anyone experiencing this? When cold booting system hangs before post.
After reset it boots perfectly. Wondering if this could be a glitch
in bios version 1005 as I think it started after bios update. I don't
think its a power supply issue as after reset it boots fine.
Click to expand...

No problems here. Been running 1005 since the day it was released.

XP 2600 (10.5x200)
2-512MB PC3500 Kingston
400w Antec
Pri/Master - WD 120GB ATA100
Pri/Slave - WD 100GB ATA100
Sec/Master - HP 200i DVD+RW
Sec/Slave - TDK 40/12/48 CDRW
Video - MSI GF4 Ti4200 w/8X AGP

Jason
 
Anyone experiencing this? When cold booting system hangs before post.
After reset it boots perfectly. Wondering if this could be a glitch
in bios version 1005 as I think it started after bios update. I don't
think its a power supply issue as after reset it boots fine.

I'm running:
XP2600/333
400 w Antec
2-256 pc2100 (I'll get better ram when prices drop)
Pri/Master-ATA100 40gig
Pri/Slave-ATA66 20gig
Sec/Master-DVDrom
Sec/Slave-CDRW
SATA1-ATA100 20gig w/Iwill converter
SATA2-not used
AGP-Gainward Ti-450(Ti-200) Golden Sample (old but still a great card)

cal
Click to expand...

I'm seeing the same thing with ver 1004. I also have the same problem
on an IBM board with a P4 1.6 chip. After watching the start up, I've
concluded it is the auto drive detection routine causing the delays on
both machines.

Greg
 
I'm seeing the same thing with ver 1004. I also have the same problem
on an IBM board with a P4 1.6 chip. After watching the start up, I've
concluded it is the auto drive detection routine causing the delays on
both machines.

Greg
Click to expand...

Find any way around this?

cal
 
Back
Top